• 한국기계가공학회지
• /
• 제20권1호
• /
• pp.110-115
• /
• 2021

A multi-band, compact, and complex vehicle roof antenna has become important in terms of car exterior design and multi-functions which include Radio, DAB/DMB, SXM, GNSS, Telematics, and V2X. In this paper, we propose a compact multi-band V2X pole-type roof antenna. Using impedance change characteristic, a single pole antenna which has multiband such as radio, DAB/DMB, telematics, and V2X band is proposed. With two patch antennas for GNSS and SXM, the dimension of a multiband roof antenna is 131x63x37mm only.

• 한국항공우주학회지
• /
• 제42권11호
• /
• pp.988-995
• /
• 2014

관측위성으로부터 획득된 영상데이터를 지상국에 효율적으로 전송하기 위해 2축 짐벌 형태의 지향성 X-band 안테나가 적용되고 있으며, 안테나의 고속 정밀지향성 확보를 위해 구비된 모터 및 기어 간의 부정확한 맞물림으로부터 발생되는 미소진동은 영상품질 저하의 원인으로 작용한다. 고해상도 관측위성의 지향성능 향상을 통한 고해상도 영상정보 획득을 위해서는 안테나 구동시 발생하는 미소진동이 주요 임무장비에 전달되지 않도록 미소진동 절연이 요구된다. 본 논문에서는 X-band 안테나의 미소진동절연을 목적으로 의탄성 SMA 메쉬와셔 진동 절연기를 제안하였으며, 정하중 시험을 통해 진동 절연기의 기본 특성을 확인하였다. 또한, X-band 안테나의 미소진동 시험을 통해 진동절연기 유무에 따른 진동절연성능을 비교 및 분석 하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.893-899
• /
• 2014

X-band antenna has been widely used to effectively transmit the high resolution image data from the observation satellite to the ground station. To achieve above mission, X-band antenna is mainly composed of the 2-axis gimbal system using stepping motors and gears. However, the micro-vibration induced by the stepping motor actuation and the imperfect gear teeth alignment during this on-orbit operation is the main source of image quality degradation. In this paper, X-band antenna combined with a blade gear for micro-vibration isolation was suggested and investigated. The structural safety of the blade gear with low rotational stiffness was confirmed by structure analysis based on the derived torque budget. The isolation performance of the X-band antenna with the blade gear was verified through micro-vibration measurement test using the dedicated micro-vibration measurement device proposed in this study.

• 한국전자파학회논문지
• /
• 제26권8호
• /
• pp.718-729
• /
• 2015

S-대역과 X-대역에서 동작하며, 개구면 공유 구조를 가지는 광대역 패치 안테나를 제작하였다. S-대역 안테나는 $2{\times}2$로 천공된 패치를 가지며, 천공된 자리에 X-대역에서 동작하는 패치 안테나를 $2{\times}2$ 배열하였다. 두 대역에서 모두 20 % 이상의 넓은 대역폭 특성을 가지는 개구면 공유 구조를 가지는 이중 대역 안테나를 제작하고, 방사 특성을 분석하였다.

• Journal of electromagnetic engineering and science
• /
• 제3권1호
• /
• pp.23-28
• /
• 2003

In this paper, a triple-band planar antenna is proposed for the application to miniaturized automobile safety devices operating at X band(10.5 ㎓), K band(24.15 ㎓), and Ka band(34.3 ㎓). The frequency ratio between the resonant frequencies of this antenna can be adjusted from 1.99 to 2.23 for both X band and K band by varying its slit length. Parasitic elements are added on the modified slot loaded antenna to obtain the third resonance. From numerical as well as experimental results, it has been confirmed that this type of antenna is appropriate for planar multi-band antenna systems.

• 항공우주기술
• /
• 제12권2호
• /
• pp.1-6
• /
• 2013

저궤도 위성은 지상국과의 접속 중에 X-band 안테나를 이용해 촬영한 영상을 전송한다. X-band 안테나는 교신 시간 동안 TPF (tracking parameter file)에 따라 움직이며 지상국의 안테나를 지속적으로 지향한다. TPF 생성 소프트웨어는 위성의 궤도 및 자세 정보와 촬영 및 다운링크 임무 정보를 이용해 X-band 안테나가 지상국을 지향하도록 하는 Azimuth, Elevation 정보를 생성한다. 위성이 지상국 상공을 지나가는 경우 X-band 안테나 특성 상 방위각 속도가 급격하게 증가하며, 특정 각속도로 회전하는 경우 위성의 지터를 유발할 수 있다. 영상촬영과 다운링크를 동시에 수행하는 실시간 임무의 경우 지터에 의한 영상 열화를 방지하기 위해 Azimuth 각속도를 일정 수준 이하로 낮춰야 한다. 현재 사용하는 방법인 한 점의 가상 지상국을 지향하는 방법으로는 각속도를 낮추는데 한계가 있다. 이 논문에서는 방위각 고정 기법을 이용해 X-band 안테나의 Azimuth 각속도를 낮추는 방법을 제안한다. 시뮬레이션 결과는 제안된 방법을 이용해 방위각 속도가 현저하게 감소함을 나타낸다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.485-488
• /
• 2005

The 2nd KOrea Multi-Purpose Satellite (KOMPSAT -2) has been developed by Korea Aerospace Research Institute (KARI) since 2000. Multi Spectral Camera (MSC) is the payload for KOMPSAT -2, which will provide the observation imagery around Korean peninsula with high resolution. KOMPSAT-2 has adopted X-band Tracking System (XTS) for transmitting earth observation data to ground station. For this, data which describes and controls the pre-defined motion of each on-board X-Band antenna in XTS, must be transmitted to the spacecraft as S-Band command and it is called as Tracking Parameter Files (TPF). In this paper, the result of the development of TPF Generation S/W for KOMPSAT-2 X-Band Antenna Motion Control.

• 전기전자학회논문지
• /
• 제28권1호
• /
• pp.20-25
• /
• 2024

This paper presents a new dualband shared-aperture microstrip antenna to operate in the S-Band of 2 GHz and X-Band of 8 GHz, for a Low Earth Orbit satellite antenna system. The proposed antenna incorporates two types of patches those are a rectangular loop-shaped for the S-Band and a square patch for the X-Band. Each patch are optimized for its respective operating band with minimal interference. The proposed antenna achieves a bandwidth of 16 MHz in the S-Band and 572 MHz in the X-Band. The highest gain is measured 7.14 dBi at 1.99 GHz and 7.95 dBi at 7.88 GHz. The proposed antenna exhibits half power beamwidths of 85 degree and 80 degree at 1.99 GHz and 7.88 GHz, respectively. The proposed dualband shared-aperture microstrip antenna may be a good candidate for as a feeding system of a dualband reflectarray antenna With its unidirectional radiation pattern from excellent agreement between simulation and measurement results.

• 한국통신학회논문지
• /
• 제8권2호
• /
• pp.48-53
• /
• 1983

This paper proved experimentally that the disc array microstrip antenna designed and manufactured at X-band is capable to use for wide band antenna. This antenna arrayed the discs to have different resonant frequencies log-periodically on printed circuit board. The experimental result of this antenna showed the flat gain and good impedence matching characteristics. The VSWR of this antenna is 2.2 below through the system band.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.309-315
• /
• 2010

A dual-band dual-polarized microstrip antenna array for an advanced multi-function radio function concept (AMRFC) radar application operating at S and X-bands is proposed. Two stacked planar arrays with three different thin substrates (RT/Duroid 5880 substrates with $\varepsilon_r$=2.2 and three different thicknesses of 0.253 mm, 0.508 mm and 0.762 mm) are integrated to provide simultaneous operation at S band (3~3.3 GHz) and X band (9~11 GHz). To allow similar scan ranges for both bands, the S-band elements are selected as perforated patches to enable the placement of the X-band elements within them. Square patches are used as the radiating elements for the X-band. Good agreement exists between the simulated and the measured results. The measured impedance bandwidth (VSWR$\leq$2) of the prototype array reaches 9.5 % and 25 % for the S- and X-bands, respectively. The measured isolation between the two orthogonal polarizations for both bands is better than 15 dB. The measured cross-polarization level is ${\leq}-21$ dB for the S-band and ${\leq}-20$ dB for the X-band.