• Korean Journal of Crystallography
• /
• v.13 no.2
• /
• pp.96-100
• /
• 2002

The title compound, (H/sub 3/NCH/sub 2/CH/sub 2/NH/sub 3/)HPO/sub 4/ (Ⅰ), has been synthesized by hydrothermal technique for the first time and its novel structure analyzed by X-ray single crystallography. The compound (Ⅰ) crystallizes in the monoclinic system, P2/sub 1//c space group with a＝10.209(1), b＝7.891(1), c＝ 8.039(1) (equation omitted), β＝ 92.138(9)°, V＝: 647.2(2) (equation omitted), Z＝4, R/sub 1/＝0.0295 and ωR/sub 2/＝0.0811 for 1141 independent reflections. The compound (Ⅰ) is interconnected to give a three-dimensional network through hydrogen-bonding interactions.

• Korean journal of food and cookery science
• /
• v.10 no.1
• /
• pp.76-79
• /
• 1994

This study was carried out to examine changes in morpholgy and crystallinity of cowpea starch during preparation of chongpo-mook(starch gel food). It was known by photornicroscopy under polarized light and X-ray diffractometry that cowpea starch had lost its crystallinity at the temperature range of 70∼75$^{\circ}C$ It also was obserbed by scanning electron microscopy that overall shape of starch granules was maintained inspite of swelling to considerable extent at the range of 65∼75$^{\circ}C$, however, granules were folded after solubles were extracted out of them above 85$^{\circ}C$. Mechanism of gelation seemed to be formation of junction zones stabilien by groups of weak H-bonds, not by recrystalliztion according to the results of DSC thermogram of reheating of sample pan after cooling and X-ray diffractogram of reheated cowpea starch gel.

• Journal of the Korean Magnetics Society
• /
• v.7 no.4
• /
• pp.196-204
• /
• 1997

In order to study the effect of substituted $Al^{3+}$ of goethite, which was collected from Shinpyeongli in Cheju Island, we used X-ray diffractometer and Mossbauer spectrometer. In X-ray diffraction analysis, the X-ray diffraction peaks of goethite are not detected due to the high substituted Al contents of goethite. Isomer shifts indicated that the valence of Fe ions is almost oxidized trivalent of high spin state. It is believed that the contents of substituted diamagnetic $Al^{3+}$ for $Fe^{3+}$ is about 15.5 mol%. It seems that Neel temperature and saturated magnetic hyperfine field of the clay goethite are about 250 K and 498 kOe, respectively. For the temperature lower than Neel temperature, quadrupole splittings of the clay goethite are greatly influenced by $Al^{3+}$ substitution. It is believed that the high decrease of Neel temperature and magnetic hyperfine field of the clay goethite results from the magnetic dilution produced by substituting the diamagnetic $Al^{3+}$/TEX> for $Fe^{3+}$.

• Journal of the Korean Ceramic Society
• /
• v.33 no.11
• /
• pp.1292-1300
• /
• 1996

In-site X-ray diffraction measurements under electric field up to 20kV/ cm were carried out on PLZT (x/70/30) with x=7.5, 8.0, 8.5, and 10.5 All of PLZT belonged to cubic phases. At x=7.5, 8.0 and 8.5 PLZT behaved as an antiferroelectric under low electric fields up to 4-8 kV/cm. PLZT became ferroelectric at the higher electric fields. The high-temperature measurements on the dielectric constants of PLZT with x=7.5, 8.0 and 8.5 showed that they were similar to relaxor ferroelectrics and underwent a diffuse phase transition from antiferroelectrics to paraelectrics at 50-7$0^{\circ}C$. Their P-E hysteresis curves confirmed that they were antifer-roelectrics. The broad distribution of Curie points suggests that there is a significant disorder of cations and vacances in the crystal structure of those PLZT due to La-substitution. The variation of the lattice strain of PLZT(10.5/70/30) with electic field was very small and did not show any hysteresis confirming that it was paraelectric. The degree of the electric-induced strain variation decreased as La doping increased. In PLZT(7.5/70/30) the intensity of 110 reflection changes sensitively by applying electric field. Some domains with polarization parallel to [110] appeared to be developed in the field-induced ferroelectric phase of the PLZT.

• Journal of the Korean Magnetics Society
• /
• v.4 no.4
• /
• pp.335-339
• /
• 1994

The crystallograpic and magnetic properties of $Eu(Fe_{1-x}In_{x})O_{3}$ (x=0, 0.03과 0.05) have been studied by the methods of X-ray diffraction, $M\"{o}ssbauer$ spectroscopy, and magnetic hysteresis measurement at room temperature. The X-ray results show that the samples have a crystal structure of orthorhombic and unit cell volume of the crystal with the exception of the sample of x=0 increases as increasing the In concentration. In the analysis assuming two sets of six-line of $M\"{o}ssbauer$ spectra, it is found that the magnetic hyperfine field in each of sets decreases increasing x. The linewidth of the absorption lines for the samples increased as increasing x. This implies that the data involve a sum of several hyperfine patterns which have intensity being proportional to $_{n}P_{z}(x)$, the probability of an environment with z such Fe neighbors. The magnetic hysteresis curves show decrease of $M_{s}$ and increase of $H_{c}$ of the samples with increasing x.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.397-397
• /
• 2012

에너지갭이 큰 SnO2 반도체는 빛 투과율이 우수하여 투명성이 좋으며 화학적으로 안정된 구조를 가지고 있어 전자소자 및 광소자 응용에 대단히 유용하다. SnO2 박막을 증착하는 방법은 Physical Vapor Deposition과 Chemical Vapor Deposition이 있으나 나노 구조를 가진 SnO2를 형성하기 어렵다. 전기 화학적 증착 (Electrochemical Deposition: ECD)은 낮은 온도에서 진공 공정이 필요하지 않기 때문에 경제적이며 빠른 성장 속도를 가지고 있기 때문에 SnO2 나노 구조를 효과적으로 형성 할 수 있다. 본 연구에서는 Indium Tin Oxide (ITO) 기판 위에 SnO2 나노 구조를 형성시켜 전기적 및 구조적 특성을 관찰하였다. 0.015 M의 Tin chloride pentahydrate(SnCl4 5H2O)를 타켓 물질로 사용하고 0.1 M의 KCl을 완충물질로 사용하여 SnO2 나노구조를 성장하였다. 타겟 물질이 잘 녹지 않으므로 DI water와 ethanol을 7：3의 비율로 용매 사용하였다. 전류-전압 곡선을 분석하여 최적의 성장조건을 확보하고, $65^{\circ}C$ 1기압 하에서 -2.5 V 부터 -1.0 V까지 0.5 V 간격으로 나누어서 SnO2 나노구조를 성장하였다. X-선 회절 분석결과에서 SnO2의 피크의 크기가 큰 전기화적적 성장 전압구간과, 주사전자현미경 분석 결과에서 나노 구조가 가장 잘 나타난 성장 전압구간을 다시 0.1 V 간격으로 세분화하여 최적화 조건을 분석하였다. X-선 회절 실험으로 형성한 SnO2 나노구조의 피크가 (110) (101) (200) (211) (310)로 나타났다. X-선 회절 분석의 intensity의 값이 (101)방향이 가장 크게 나타났으므로 우선적으로 (101) 방향으로 SnO2 나노구조가 성장됨을 알 수 있었다. 주사전자현미경상은 grain size가 50~100 nm 사이의 SnO2 나노구조가 형성되며, grain size가 전기화학적 증착 장치의 성장전압이 저 전압 구간에서 커지는 것을 알 수 있었다.

• Korean Journal of Crystallography
• /
• v.15 no.2
• /
• pp.93-98
• /
• 2004

The structure of C_{28}H_{41}N_4O_4Br\;{\cdot}\;2H_2O$ has been determined by X-ray deffraction methods. The crystal system is triclinic, space group Pl, unit cell constants, a=9.000(1) $\AA$, b=9.312(3) $\AA$, c=9.344(2) $\AA$, $\alpha=89.37(20)^{\circ},\;\beta=68.81(3)^{\circ},\;\gamma=84.70(4)^{\circ},\;V=726.7(8){\AA},\;T=298K,\;Z=1,\;D_c=1.402Mgm^{-3}$. The intensity data were collected on an Enraf-Nonius CAD4 Diffractometer with graphite monochromated $MoK\alpha$ radiation $(\lambda=0.71073\;{\AA}$. The molecular structure was solved by direct methods and refined by full-matrix least squares to a final $R=5.95\%$ for 2521 unique observed $F_0>4\sigma(F_0)$reflections and 370 parameters.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.262.1-262.1
• /
• 2013

ZnO 나노구조는 전기적 성질과 화학적인 안정성 때문에 가스센서, 투명 전극 및 태양전지와 같은 전자소자와 광소자에 널리 사용되고 있다. ZnO 박막을 증착하는 방법은 Physical Vapor Deposition과 Chemical Vapor Deposition이 있으나 나노 구조를 가진 SnO2를 형성하기 어렵다. 전기 화학적 증착(Electrochemical Deposition: ECD)은 낮은 온도에서 진공 공정이 필요하지 않기 때문에 경제적이며 빠른 성장 속도를 가지고 있기 때문에 ZnO 나노 구조를 효과적으로 형성 할 수 있다. 본 연구에서는 Indium Tin Oxide (ITO) 기판 위에 ZnO 나노 구조를 형성시켜 전기적 및 구조적 특성을 관찰하였다. 0.1 M zinc nitrate와 0.1 M potassium chloride를 용매에 각각 용해하여 ZnO 나노구조를 성장하였다. ZnO 나노구조를 성장하기 위하여 인가전압을 -0.75 V부터 -2.5 V까지 0.5 V 간격으로 변화하였다. X-선 회절 분석결과에서 ZnO의 피크의 크기가 큰 전기화적적 성장 전압구간과, 주사전자현미경 분석결과에서 나노 구조가 가장 잘 나타난 성장 전압구간을 다시 0.1 V 간격으로 세분화하여 최적화 조건을 분석하였다. X-선 회절 실험으로 형성한 ZnO 나노구조의 피크가 (110) (002)로 나타났다. X-선 회절 분석의 intensity의 값이 (002)방향이 가장 크게 나타났으므로 우선적으로 (002) 방향으로 ZnO 나노구조가 성장됨을 알 수 있었다. 주사전자현미경상은 grain size가 200~300 nm 사이의 ZnO 나노구조가 형성되며, grain size가 전기화학적 증착 장치의 성장전압이 커짐에 따라 커지는 것을 알 수 있었다.

• Korean Journal of Crystallography
• /
• v.12 no.4
• /
• pp.233-238
• /
• 2001

X-ray microdiffraction which uses x-ray beam focused down to a micron size from synchrotron radiation sources allow precision measurements of local orientation and strain variations in polycrystalline materials. Using x-ray microdiffraction setup at Pohang Light Source, we investigated the tex-ture of Cu interconnects with various widths on Si wafer by collecting Laue images and focused to about 2×3㎛ ² in size. Our results show that 1㎛ wide Cu interconnect had grains in rather ran- dom orientation. On the other hand the 20㎛ wide interconnects showed a 〈111〉fiber texture near the center. The grains were 2∼5㎛ long at the 1㎛ wide interconnect and 6∼8㎛ in size at the 20㎛ wide interconnect.

• Journal of Conservation Science
• /
• v.32 no.3
• /
• pp.403-416
• /
• 2016

Mineral composition and content of 22 Korean Dancheong pigment products were obtained by Rietveld quantitative analysis. Jubosa, Hwang, Seokrok, Seokcheong and Hobun consist of pure cinnabar, orpiment, malachite, azurite and calcite (or aragonite), respectively. Whereas Seokganju, Hwangto, Noerok, Lapis lazuli, Baekto and Cockie hobun mainly consist of hematite, goethite, celadonite, lazurite, kaolin mineral and portlandite, respectively. And they all consist of soil minerals (quartz, feldspar, sericite and vermiculite) and filler minerals in the industry field (calcite, gypsum and anhydrite) at a different content. Quantitative XRD proved more useful method to determined exact mineral composition and content than chemical or microscopical data. If this method utilize for specification of natural pigment product, it is considered to be applicable in restoration technology and conservation science field.