• Journal of the Korean Society of Radiology
• /
• v.9 no.4
• /
• pp.205-211
• /
• 2015

At a recent medical imaging technology, the major issue of X-ray diagnosis in breast cancer is the early detection of breast cancer and low patient's exposure dose. As one of studies to acquire a monochromatic X-ray, Technologies using multilayer mirror had been preceded. However, a uniform multilayer mirror that consists of uniform thin-film thickness can acquire a monochromatic X-ray only in the partial area corresponds to angle of incidence of white X-ray, so there are limits for X-ray imaging technology applications. In this study, we designed laterally graded multilayer mirror(below GML) that reflects same monochromatic X-ray over the entire area of thin-film mirror, which have the the thickness of the linear gradient that correspond to angle of incidence of white X-ray. By using ion-beam sputtering system added the mask control system we fabricated a GML which has size of $100{\times}100mm^2$. The GML is designed to achieve the monochromatic X-ray of 17.5kev energy and has thin-film thickness change from 4.62nm to 6.57nm(3.87nm at center). It reflects the monochromatic X-ray with reflectivity of more than 60 percent, FWHM of below 2.6keV and X-ray beam width of about 3mm. The monochromatic X-ray corresponded to 17.5keV using GML would have wide application in development of mammography system with high contrast and low dose.

• Journal of Biomedical Engineering Research
• /
• v.19 no.3
• /
• pp.225-232
• /
• 1998

Results of Monte Carlo simulations on amorphous silicon based x-ray imaging arrays are described. In order to investigate the characteristics of amorphous silicon x-ray imaging devices and to provide the optimum design parameter, Monte Carlo simulations were performed. Monte Carlo simulation codes for our purpose were developed and various combinations of x-ray peak voltages, aluminum filter thicknesses, CsI(TI) thicknesses, and amorphous silicon photodiode pixel sizes were tested in connection with detection efficiency and spatial resolution of the amorphous silicon based x-ray imager. With usual Csl(TI) thickness of 300${\mu}{\textrm}{m}$-500${\mu}{\textrm}{m}$, detection efficiency was in the range of 70%-95% and energy absorption efficiency was in the range of 40%-70% for 60kVp-120kVp x-ray. From the simulations it was found that amorphous silicon pixel size and Csl(TI) thickness were the most important parameters which determine the resolution of the imager. By use of our simulation results we could provide proper combinations of Csl(TI) thicknesses and pixels sizes for optimum sensitivity and resolution.

• Journal of the Korean Magnetics Society
• /
• v.10 no.2
• /
• pp.81-85
• /
• 2000

Crystallographic and magnetic properties of the Mn-doped orthoferrite LaFe$_{1-x}$Mn$_{x}$ O$_3$(0.0$\leq$x$\leq$O.4) system have been investigated by means of x-ray diffractometry, M ssbauer spectroscopy, vibrating sample magnetometer and super-conducting quantum interference device. The structure of the system was found to be orthorhombic distorted perovskite structure. At room temperature, the M ssbauer spectra for x=0.0 consists of one Zeeman sextets from Fe$^{3+}$ ions at octahedral sites. The M ssbauer spectra of two Zeeman sextets (x$\leq$0.1) change one Zeeman sextets and a paramagnetic doublet (x=0.4). The saturation magnetization increases but the coercivity decreases with increasing x in LaFe$_{1-x}$Mn$_{x}$ O$_3$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.371-378
• /
• 2000

In this study, we proposed pathological pattern detection system for X-ray chest image using artificial neural network. In a physical examination, radiologists have checked on the chest image projected the view box by a magnifying glass and found out what the disease is. Here, the detection of X-ray fluoroscopy is tedious and time-consuming for human doing. Lowering of efficiency for chest diagnosis is caused by lots mistakes of radiologist because of detecting the micro pathology from the film of small size. So, we proposed the method for disease detection using artificial neural network and digital image processing on a X-ray chest image. This method composes the function of image sampling, median filter, image equalizer used neural network and pattern recognition used neural network. We confirm this method has improved the problem of a conventional method.

• Journal of Conservation Science
• /
• v.27 no.3
• /
• pp.269-276
• /
• 2011

We have suggested effective P-XRF analysis method for pigment painting layer by calculating penetration depth of X-ray. This experiment calculated that X-ray generated from P-XRF was possible penetration until 1.17mm deep in the pigment painting. Based on the experimental results, analysis for eight color pigments on wall paintings in Ssanggyesa Main Hall, most pigments were painted traditional pigments. However pigments on recently restorated wall painting were used synthetic modern pigments.

• Fire Science and Engineering
• /
• v.29 no.6
• /
• pp.76-83
• /
• 2015

EPS sandwich panel contains flame retardants that slow down ignition during fires,reduce the amount of heat generated, and block the spread of combustion. However, if a sandwich panel does not satisfy standards for fire-retardant performance, it may increase damage to property and human life. It is difficult to test the fire-retardant performance of a finishing material with the naked eye, so it is necessary to develop convenient and fast evaluation methods that are convenient and fast. In this study, a fire safety evaluation method for EPS sandwich panel was analyzed using X-ray to detect specific components related to the fire-retardant performance X-ray fluorescence analysis (XRF) indicated that suitable panel products contained more aluminum in comparison to unsuitable products. Gibbsite was identified as the main crystalline material of flame retardant EPS through X-ray diffraction analysis (XRD) and was included in both suitable products and unsuitable products, but there was a difference in crystalline structure. This study was verifies the possibility of evaluating fire-retardant performance using ultimate analysis and crystal analysis through these X-ray methods.

• Biomedical Science Letters
• /
• v.3 no.1
• /
• pp.21-28
• /
• 1997

Male rats of Albino strain were divided into four groups, control group, X-irradiated group, WR-2721 treatment group and X-irradiated group treated with WR-2721. The radioprotective effect of treatment with S-2 (3-aminopropylamino)ethylphosphorothioic acid (WR-2721) in the dose of 200mg/kg by intraperitonial injection on rats 20min prior to wholebody X-irradiation (8Gy) was studied. Each group determined serum alkaline phosphatase (ALP), aspartate aminotransferase (ASI), alanine aminotransferase (ALT), lactate dehydrogenase (LDH) activities and contents of serum glucose after 1, 3, 7 and 10 days. The ALP and AST activities of X-irradiated group were significantly decreased (p<0.05) compared with that of control group, but X-irradiated group treated with WR-2721 less decreased those enzyme activities compared with the X-irradiated group. X-irradiated group was significantly increased (p＜0.05) ALT and LDH activities compared with that of control group, but X-irradiated group treated with WR-2721 less increased those enzyme activities compared with the X-irradiated group. The concentration of serum glucose of X-irradiated group was significantly increased (p<0.05) compared with that of control group, but X-irradiated group treated with WR-2721 less increased compared with that of X-irradiated group. It may be considered that WR-2721 provided radioprotective effect of organs of body from X-irradiation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.210.2-210.2
• /
• 2013

현재 국내의 상용화된 디지털 방식 X-선 영상장치에서 간접변환방식은 대부분 CsI를 사용하고 있으며, X-선 흡수에 의해 전기적 신호를 발생시키는 직접변환방식은 Amorphous Selenium(a-Se)을 사용한다. a-Se은 진공 중에 녹는점이 낮아 증착시 substrate의 온도에 따라 민감한 변화를 보인다. 본 연구에서는 간접변환방식에 비해 높은 영상의 질을 획득할 수 있는 직접변환방식의 a-Se기반 X-선 검출기 제작 시 substrate에 인가된 온도에 따른 특성을 연구하여 최적화 된 substrate의 온도를 알고자 한다. 본 실험에서는 glass에 투명한 전극물질인 Indium Tin Oxide (ITO)가 electrode로 형성된 substrate를 사용하였으며 그 상단에 a-Se을 Physical Vapor Deposition (PVD)방식을 거쳐 X-선 검출기 샘플을 제작하였다. PVD 공정 시 네 개의 보트에 a-Se 시료를 각각 100g씩 총 400g을 넣고, $5{\times}10-5Torr$까지 진공도를 낮추었다. 보트의 온도는 $270^{\circ}C$에서 40분 $290^{\circ}C$에서 90분으로 온도를 인가하여 a-Se을 기화시켜 증착하였다. 증착 시 substrate 온도를 각각 $20^{\circ}C$, $40^{\circ}C$, $60^{\circ}C$, $70^{\circ}C$ 네 종류로 나누어 실험을 진행하였다. 끝으로 증착된 a-Se 상단에 Au를 PVD방식으로 electrode를 형성시켜 a-Se기반의 X-선 검출기 샘플 제작을 완료하였다. 제작된 a-Se기반의 X-선 검출기 샘플의 두께는 80에서 $85{\mu}m$로 온도에 따른 차이가 없었다. 이후에 전기적 특성을 평가하기위해 electrometer와 oscilloscope를 이용하여 Dark current와 Sensitivity를 측정하여 Signal to Noise Ratio(SNR)로 도출하였으며 Scanning Electron Microscope(SEM) 표면 uniformity를 관찰하였다. 또한 제작된 a-Se기반 X-선 검출기 샘플의 hole collection 성능을 확인하고자 mobility를 측정하였다. 측정결과 a-Se의 work function을 고려한 $10V/{\mu}m$기준에서 70kV, 100mA, 0.03sec의 조건의 X-선을 조사 하였을 때 Sensitivity는 세 종류의 검출기 샘플이 15nC/mR-cm2에서 18nC/mR-cm2으로 비슷한 양상을 나타내었지만, substrate온도가 $70^{\circ}C$때의 샘플은 10nC/mR-cm2이하로 저감됨을 알 수 있었다. 그리고 substrate온도 $60^{\circ}C$에서 제작된 검출기 샘플의 전기적 특성이 SNR로 환산 시, 15.812로 가장 우수한 전기적 특성을 나타내어 최적화 된 온도임을 알 수 있었다. SEM촬영 시 온도상승에 따라 표면 uniformity가 우수하였으며, Mobility lifetime에서는 $60^{\circ}C$에서 제작된 검출기 샘플이 deep trap 수치가 높아 hole이 $0.04584cm2/V{\cdot}sec$로 $0.00174cm2/V{\cdot}sec$의 electron보다 26.34배가량 빠른 것을 확인하였다. 본 연구를 통해 a-Se증착 시, substrate에 인가된 온도는 균일한 박막의 형성 및 표면구조에 영향을 미치며 온도가 증가할수록 안정적인 전기적 특성을 나타내지만 $70^{\circ}C$이상일 시, a-Se층의 결정화가 생겨 deep trap을 발생시켜 전기적 특성이 저하됨을 확인 할 수 있었다. 따라서 증착 시의 substrate의 온도 최적화는 a-Se기반 X-선 검출기의 안전성 및 성능향상을 위해 불가피한 요소가 된다고 사료된다.

• Journal of Radiation Protection and Research
• /
• v.9 no.1
• /
• pp.33-42
• /
• 1984

A great variety of nuclear gamma rays emitted from fission and activation products of spent nuclear fuel contains much information that can be elicited without affecting the integrity of the fuel elements. But the extraction of such information from the complex spectrum is difficult and requires computer codes. In the present work, a versatile code 'CAERI' was developed which locates peaks and calculates their areas for X-rays as well as gamma rays using elegant features of some widely used programs for gamma-ray peak fitting. 'CAERI' coded in FORTRAN used infinite series approximation more accurate than other workers various, simple, piecewise series approximations for evaluations of the Voigt function which represents the X-ray peak with non-negligible natural line width. 'CAERI' can handle even a complex multiplet consisting of peaks from X-rays and gamma rays in arbitrary mixture, which one often encounters in the isotopic analysis of heavy elements such as U and Pu. The results of the fitting performed on the test spectra of $^{177m}\;Lu\;{\gamma}-ray\;and\;^{235}U\;K_{\alpha}$X-ray show good agreement with those by previous workers.

• Journal of the Korean Magnetics Society
• /
• v.11 no.2
• /
• pp.58-62
• /
• 2001

The L $i_{0.5}$F $e_{2.5-x}$A $l_{x}$ $O_4$ systems (x=0, 0.3, 0.6, 0.9, 1.2, 1.5) were investigated by X-ray diffraction and Mossbauer spectroscopy. The structure of all the samples is cubic spinel type and lattice constant decrease with increasing Al content x. The Moissbauer spectra reveal two sextet for 0$\leq$x$\leq$0.6, two sextet and a doublet for 0.9$\leq$x$\leq$1.2, and a doublet for x=1.5. The cation distribution of the samples is (L $i_{1-a}$$^{+}$F $e_{a}$ $^{3+}$)$^{A}$[L $i_{a-0.5}$$^{+}$A $l_{2.5-a-x}$$^{+}$F $e_{2.5-a-x}$$^{3+}$]$^{B}$ $O_4$$^{2-}$ and substituted $Al^{3+}$ ions decrease the covalency of F $e^{3+}$- $O^{2-}$ bond in B-sites and A-B super-exchange interactions.tions.s.tions.ons.s.