• Journal of Aerospace System Engineering
• /
• v.12 no.2
• /
• pp.46-58
• /
• 2018

A two-axis gimbal-type X-band antenna is widely used to transmit bulk image data from high-resolution observation satellites. However, undesirable microvibrations induced by driving the antenna should be attenuated, because they are a main cause of image-quality degradation of the observation satellite. In this study, a pseudoelastic memory alloy (SMA) gear was proposed to attenuate the microvibrations by driving the antenna in an azimuth angle. In addition, the proposed gear can overcome the limitations of the conventional titanium blade gear, which is not still enough and is vulnerable to plastic deformations under excessive torque. To investigate the basic characteristics of the proposed SMA mesh washer gear, a static load test was performed on the thickness of the SMA mesh washer and the rotation of the gear. Moreover, The microvibration measurement test demonstrated that the SMA mesh washer gear proposed in this study is effective for microvibration attenuation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.4
• /
• pp.377-387
• /
• 2016

Design of X-band frequency FMCW based imaging radar with multi-resolutions and performances of the self-manufactured radar system are presented in this study. In order to implement the multi-bandwidths, a ramp sequence of the FMCW signal is consisting of two kinds of 'saw-tooth' waveform with different bandwidth, and a receiver circuit consisting of L-band source and frequency converter circuit is used to effectively extract spectra of beat-frequency from the received signal of X-band frequency. The system setups for performance measurement of self-manufactured radar system are maximum output power of 35 dBm, sampling frequency of 1.2 MHz and sweep time of 1 ms. Then, the measured resolutions of the modulated signal having bandwidth of 500 MHz and 300 MHz in range & azimuth-direction are (0.28 m, 0.26 m) and (0.44 m, 0.27 m), respectively.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.07a
• /
• pp.325-326
• /
• 2019

본 논문은 퍼스널 컴퓨팅 환경의 성능 향상을 위한 인피니밴드 네트워크 기반 인메모리 스토리지 시스템의 구조를 제안한다. 성능평가를 위해 100Gbit/s을 지원하는 MCX455A-ECAT 한 쌍을 MCP1600-E02A 케이블로 직결한 x86-64 architecture의 인피니밴드 네트워크를 구성하고 Target 시스템에 iSCSI Extensions for RDMA(iSER)을 적용한 RAM disk를 생성하였다. CentOS virt-manager에서 생성한 Initiator 시스템의 Windows 가상 머신에는 Target 시스템의 RAM disk를 VirtIO 방식으로 연결한다. 이 구조는 시스템 종료 후 초기화되는 종래 RAM disk의 일반적 특성을 개선한다. 마지막으로 스토리지 성능평가를 통해 향후 출시될 PCI Express 4.0 이상의 시스템과 퍼스널 컴퓨팅 스토리지 성능 향상 측면에서 해당 구조의 적합성을 보인다.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.5
• /
• pp.335-342
• /
• 2015

Phononic crystals are composite materials consisting of a periodic arrangement of scattering inclusions in a host material. One of the most important properties of phononic crystals is the existence of band gaps, i.e., ranges of frequencies at which acoustic waves cannot propagate through the structure. The present study aims to investigate theoretically and experimentally the acoustic band structures in two-dimensional (2D) phononic crystals consisting of periodic square arrays of stainless steel solid cylinders with a diameter of 1 mm and a lattice constant of 1.5 mm in water. The theoretical dispersion relation that depicts the relationship between the frequency and the wave vector was calculated along the ${\Gamma}X$ direction of the first Brillouin zone using the finite element method to predict the band structures in the 2D phononic crystals. The transmission and the reflection coefficients were measured in the 2D phononic crystals with 1, 3, 5, 7, and 9 layers of stainless steel cylinders stacked in the perpendicular direction to propagation at normal incidence. The theoretical dispersion relation exhibited five band gaps at frequencies below 2 MHz, the first gap appearing around a frequency of 0.5 MHz. The location and the width of the band gaps experimentally observed in the transmission and the reflection coefficients appeared to coincide well with those determined from the theoretical dispersion relation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.89-95
• /
• 2003

This paper proposes downlink blocking model and approximation equation using lower bound approximation in order to determine the proper guard band between cdma2000 1X and WCDMA in handover areas. The frequency sharing conditions obtained by the model and approximation equation on blocking probability proposed in the paper, are co-site of base station and guard band higher than 1 MHz. Also, the proposed equation is in the form of Q-function. It is an analytical solution overcoming the drawback of recalculation, belonged to Monte-Carlo technique.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.89-98
• /
• 2000

This paper presents an active noise cancelling model using wavelet transform and subband filter banks based on adaptive filter. The analysis filter banks decompose input and error signals into QMF filter banks of lowpass and highpass bands. Each filter bank uses wavelet filter with dyadic tree structure. The decomposed input and error signals are iterated by adaptive filter coefficients of each subband using filtered-X LMS algorithm. The synthesis filter banks make output signal of wideband with perfect reconstruction to prepare adaptive filter output signals of each subband. The analysis and synthesis niter hants use conjugate quadrature filters for Pefect reconstruction. Also, The delayed LMS algorithm model for on-line identification of error path transfer characteristics is used gain and acoustic time delay factors. The proposed adaptive active noise cancelling modelis suggested by system retaining the computational and convergence speed advantage using wavelet subband filter banks.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1990.06a
• /
• pp.745-748
• /
• 1990

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1991.04a
• /
• pp.219-222
• /
• 1991

• The Magazine of the IEIE
• /
• v.40 no.2
• /
• pp.49-56
• /
• 2013

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.1
• /
• pp.36-38
• /
• 1973