• 한국생활과학회지
• /
• 제10권1호
• /
• pp.113-126
• /
• 2001

The purpose of this study was to investigate clothing behavior and ornaments wear of university students. The subject of this study consists of 241 college students who were attended in Kongju National University. SPSSWIN Program was utilized to calculated frequency(N), mean value(M) and standard deviation(SD) for statistical analysis. Differences among the populations were examined through T-test, F-test, $x^2$-test. The results of this study were as follow : 1. Clothing behavior of university students had significant difference according to sex, grade. In general, female students showed higher score than did male students in clothing interest, clothing conformity, self-estimation about clothing, clothing dependence, clothing aesthetic, clothing modesty, A first-year students had high tendency in clothing interest. 2. The wear of ornaments had significant difference according to variables. Buying the ornaments, most of students sot information in show window and emphasized on design. Male students wanted to have the ornaments of shoes, watch, hat & necklet, but female students wanted to have the ornaments of shoes, earring, necklet & hairpin. 3. Clothing behavior has Influenced university students' ornaments wear. The university students who appeared to be interested in clothes were apparently influenced by peers when selecting ornaments. Ornaments were usually bought in the department store, while belts were among the most popular choices. Students who stressed color when purchasing ornaments showed a high level of interest in and dependence on clothes. On the basic of these results, we can conclude that university students' taste in clothing behavior and use of ornaments wear depend on several different factors. Therefore, it is possible to outline the shift in clothing attitudes during adolescence. In order to understand university students' behaviour concerning clothes, much guidance and various studies on the subject are much recommended.

• Journal of Yeungnam Medical Science
• /
• 제3권1호
• /
• pp.301-306
• /
• 1986

저자들은 1986년 7월 2일 본 영남대학교 의과대학 부속 병원 내과에 입원한 혈액성 심낭 삼출액및 심막 비후 환자에서 심낭 개창술시 심막 조직 검사상 심막 악성 중피종으로 진단되고 급격한 임상 경과를 보이고 사망한 예를 경험하였다.

• 반도체디스플레이기술학회지
• /
• 제4권1호
• /
• pp.29-34
• /
• 2005

Tungsten oxide($WO_{3}$) is suitable to materials for photochromic window in the visible region. The resistivities of CdS, $WO_{3}$, and $WO_{3}$/CdS films prepared by thermal evaporation method were $4.61\times 10\^{3}$, $7.59\times10^{3}$, and $6.29\times10^{3}$ $\omega$ cm. And x-ray diffraction patterns of CdS, $WO_{3}$/CdS films showed a preferred orientation of hexagonal(002), and the monoclinic(020) structure, respectively. The optical transmission were measured that the cut-on wavelength were 510nm, 380nm for CdS and $WO_{3}$ films respectively, and the transmission spectrum of $WO_{3}$/CdS was shifted into the visible region. Photoluminescence(PL) spectra showed the two peaks at 2.8 eV and 3.2 eV for the as-grown sample($WO_{3}$/CdS ($500{\AA}$), but the other sample($WO_{3}$/CdS ($1000{\AA}$)) had a peak energy value of 2.8 eV. The photochromism of $WO_{3}$/CdS films showed that the excitation of electron-hole pairs and subsequent coloration is shifted into visible-light range. And the spectral behavior of coloration turned out to be proportional to the excited electron-hole pairs creation rate of CdS film. This result is interpreted in terms of charge carrier injection from the CdS-layer into the $WO_{3}$ films. We found a value of about 2.8 eV of $WO_{3}$/CdS film which is somewhat higher than peak energy of 2.54 eV using CBD prepared by Bechinger et. al.

• 한국가정과교육학회지
• /
• 제12권1호
• /
• pp.75-87
• /
• 2000

The purpose of this study is to find out how middle and high school girls show their clothing attitudes and their life-style. clothing behavior. use their ornaments according to demographic variables. The subject of this study consists o 345 middle and high school girls living in Chung-Nam Province and Taejon Metropolitan City. SPSS/PC+ program was utilized to calculate frequency(N) mean value(M) and standard deviation (SD) for statistical analysis. Differences among the populations are examined through t-test. F-test and X2-test. The results of this study are as follow : 1. Correlation between the life style and demographic variables. Especially. life-style has significant difference(p<. 05) according to type of school. middle school girls have high tendency in the type of modern and fashion. Life-style has significant difference(p< .01) according to level of achievement studying, high level girls has high tendency in the type of practical and secure. 2. Correlation between the clothing behavior and demographic variables. According to type of school. middle school girls showed higher than high school girls in clothing conformity and clothing aesthetics. According to level of achievement studying, high level girls have high tendency in clothing conformity and clothing modesty. 3. Correlation between the use their ornaments and demographic variables. Buying the ornaments, higher-level achievement studying girl’s get information in show window. but lower-level achievement studying girl’s get information in TV or radio. The use of ornaments according to the site of school, most of school girls who live in small city or town use the ornaments as usual school life but school girls who live in big city use the ornaments to look good on their clothes. Following suggestions can be made based on the discussions above: It is necessary for us to have correct understanding about the correlation between the ornaments and clothing of school girls in order to lead them to have appropriate clothing behavior. Furthermore. it is required to construct a bridge linking a course of study to rational habits guidance which will provide us more appropriate tools for clothing behavior guidance.

• Journal of Periodontal and Implant Science
• /
• 제44권2호
• /
• pp.50-56
• /
• 2014

Purpose: The aims of this study were to measure the distance of the intraosseous vascular anastomosis in the anterolateral wall of the maxillary sinus from different reference points, and to correlate the location of the intraosseous vascular anastomosis with the tooth position and the residual bone height of the maxilla. Methods: Computed tomography (CT) images were taken from 283 patients undergoing dental implants placement in the posterior maxilla. Three horizontal lines were drawn at the ridge crest, maxillary sinus floor, and the position of the anastomosis. A vertical second line at the center of each tooth was drawn perpendicular to the horizontal lines. The distance from the ridge crest to the maxillary sinus floor and the distance from the maxillary sinus floor to the bony canal were measured from the intersections of the horizontal and vertical lines. The residual alveolar bone height was used to categorize three groups: group 1,<4 mm; group 2, between 4 and 8 mm; and group 3, >8 mm. Results: The residual bone height values of different tooth positions were significantly different (P=0.0002). The distance from the maxillary sinus floor to the intraosseous vascular anastomosis was significantly different between groups 1 and 3 (P=0.0039). At the molar sites, a moderate negative correlation was found between the residual bone height and the distance from the maxillary sinus floor to the intraosseous anastomosis. The distances of the alveolar ridge crest and the maxillary sinus from the intraosseous vascular anastomosis were not significantly different between sexes. Conclusions: Within the limitations of this study, sites with a higher residual bone height in the molar regions were at a relatively high risk of artery damage during window osteotomy preparation; therefore, we recommend taking more precautions when using a lateral approach for sinus elevation.

• 한국통신학회논문지
• /
• 제31권12C호
• /
• pp.1232-1239
• /
• 2006

MPEG-1/2/4, H.264/AVC와 같은 영상압축표준에서 사용되는 부호화 기술 중 움직임 추정 및 보상은 부호기의 복잡도에 가장 큰 영향을 끼친다. 영상 코덱에서 일반적으로 사용되는 전역탐색(Full Search) 방식은 최적의 정합블록을 찾기 위해 탐색 영역내의 모든 위치에서 SAD값을 비교하기 때문에 부호화 시간을 다량으로 소비하게 된다. 이런 문제를 개선하기 위해 초기에는 TSS, NTSS, DS, HEXBS 등 다양한 형태의 탐색 패턴을 활용한 고속 움직임 탐색 기법들이 개발되었고, 이후에는 움직임 벡터의 시 공간적 상관도를 이용한 DS기반의 MVFAST, PMVFAST, MAS, FAME 등이 개발되었다. 하지만 부정확한 움직임 벡터 탐색으로 인해 화질이 열화되는 문제와 알고리즘의 복잡도가 높아지는 문제는 여전히 해결해야 할 과제로 남아있다. 본 논문에서는 움직임 벡터 탐색시작점을 보다 정확히 결정하고, 각 프레임들의 움직임 특성을 고려한 단순화된 일차원 탐색 패턴들을 사용하여 탐색속도를 극대화하고 화질열화를 최소화시키는 알고리즘을 제안한다.

• 한국방사선학회논문지
• /
• 제11권6호
• /
• pp.423-428
• /
• 2017

본 연구에서는 몬테카를로 전산해석법으로 K대학교 진료영상 촬영 실습실의 방사선 조사실과 발생장치 제어실 내부 공간 유효선량률 분포 계산을 수행하였다. 방사선 발생장치는 최대 관전압 150 kVp에 최대 관 전류 700 mA이다. 전산해석 결과를 이용하여 차폐문이 닫힌 경우와 열린 경우의 진료영상 촬영 실습실의 공간선량 분포를 비교 평가하였다. 결과적으로, 차폐문이 열린 경우에도 방사선 발생장치 제어실의 유효선량률은 학생(수시출입자)의 연간 유효선량률 한도(6 mSv/y)를 초과하지 않는다는 것을 알 수 있었다. 하지만, 차폐문이 열려있을 때의 유효선량률이 차폐문이 닫힌 경우에 비해 납유리 앞에서는 약 16배, 차폐문 앞에서는 약 3,000배 더 높기 때문에 실습 중에 차폐문을 닫는 것이 불필요한 방사선 피폭을 크게 줄인다는 것을 알 수 있었다.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.862-868
• /
• 1996

Cadmium sulfide is commonly used as the window material for thin film solar cells, and can be prepared by several techniques such as sputtering, spray pyrolysis, close spaced sublimation (CSS), thermal evaporation, solution growth methods, etc. In this study, CdS films were deposited by thermal evaporation, close spaced sublimation, and solution growth methods, respectively, and the effects of the methods on physical properties of polycrystalline CdS deposited on ITO/glass were investigated. Also, the effects of variously prepared CdS thin films on the physical properties of CdTe deposited on the CdS were investigated. The thickness of polycrystalline CdS films was maintained at $0.3\mu\textrm{m}$ except for the solution grown CdS when $0.2\mu\textrm{m}$ thick CdS was deposited. After the deposition, all the samples were annealed at $400^{\circ}C$ or $500^{\circ}C$ in H2 atmosphere. To investigate physical properties of the deposited and annealed CdS thin films, UV-VIS spectro-photometry, X-ray diffractometry (XRD), and Auger electron spectroscopy (AES), and cross sectional transmission electron microscopy(XTEM) were used to analyze grain size, crystal structure, preferred orientation, optical properties, etc. The annealed CdS showed the bandedge transition at 510nm and the optical transmittance high than 80% for all of the variously deposited films. XRD results showed that CdS thin films variously deposited and annealed had the same hexagonal structures, however, showed different preferred orientations. CSS grown CdS had [103] preferred orientation, thermally evaporated CdS had [002], and CdS grown by the solution growth had no preferred orientation. The largest grain size was obtained for the CSS grown CdS while the least grain size was obtained for the solution grown CdS. Some of the physical properties of CdTe deposited on the CdS thin film such as grain size at the junction and grain orientation were affected by the physical properties of CdS thin films.

• 한국의류학회지
• /
• 제32권1호
• /
• pp.99-109
• /
• 2008

The purpose of this study was to survey sizing system and preferable ease and to decide the body measuring items for pattern making in a men's dress shirt for mass customization industry that is rising to the surface as a new production system. For this, it had a survey subjects were 254 males between 25 to 44 years old who wear dress shirt frequently and the relevant on line companies, and analyzed the garment sizing system and preferable ease. Collected data were analysed by frequency analysis, t-test, $X^2-test$, and ANOVA using SPSS 12.0 for window. Garment pattern making should reflect the sizes of the body parts well, and simplification of the ordering process would work as an important variable. In relation to the preferable ease, older people preferred more ease while younger people preferred fit ease. In relation to the sizes, people wearing the size of '110' preferred more ease than the size of '90'. And people weighing over 90kg preferred sufficient ease than less weighing. People height over 170cm people preferred sufficient ease for the length between shoulders than height under 170cm. In case of the companies had no consistent sizing system. Significant difference was found in the sizes, except for the size of '100', among those companies, there was significant difference in the length between shoulders and the length of the shirt among those companies and those sizes. Significant body parts for a garment pattern making was height, the circumference of the neck, the chest circumference, the length between biacromion, the arms length, and the waist circumference.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.32-32
• /
• 2009

Electric Resistance Welding (ERW) process is the most efficient process to manufacture the linepipe. To develop the high performance ERW linepipe using the high strength and the high alloy steels, the modulation of input power waveform such as sinusoidal waveform is introduced because the conventional ERW technology is not sufficient enough to produce the high quality linepipe due to its strength and high alloy contents (high Ceq). In this article, the material used for the experiment was API X60 with 8.2mm thickness, and ERW simulator at POSCO was used to develop a waveform control system for the power modulation. The frequency of power modulation was varied from 50Hz to 150Hz with the fixed amplitude of ${\pm}2%$ power. The non-modulated power input and the modulated power input cases are conducted to demonstrate the variation of the narrow gap length and the arcing frequency due to power modulation. From results of the non-modulated power input case, the excessive power causes the longer narrow gap length and the low arcing frequency due to the large heat input and the strong electro magnetic force that increase the weld defect. On the contrary, the small narrow gap length and the high arcing frequency reduce the weld defect. After modulating the power input with 50Hz and 100Hz at the fixed power, the arcing frequency increases, but the narrow gap length does not change much. The high arcing frequency prevents the formation of weld defect because the sweeping frequently cleans the oxides on the narrow gap edges. As a result, the manufacturing window can be expanded by the power modulation that provides the stable ERW process for the quality improvement of the linepipe made from the high strength/high alloy steels.