• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.105-105
• /
• 2012

본 논문에서는 전세계적으로 차세대 에너지절감 반도체로 각광을 받고 있는 GaN 소자의 연구개발 동향에 관하여 발표하고자 한다. GaN 반도체는 와이드 밴드갭(Eg=3.4eV)과 고온 안정성($700^{\circ}C$)등 재료적인 특징으로 인하여 고출력 RF 전력증폭기와 고전력용 전력반도체 응용에 큰 장점을 가진다. 고출력용 GaN RF 전력증폭 소자의 전력밀도는 기존 Si-기반 LDMOS 트랜지스터보다 10배 이상 높아 제품의 소형화와 경량화를 통하여 30% 이상의 전력절감이 가능하며, 레이더, 위성등 송수신 트랜시버 모듈에 GaN 전력증폭기를 이용할 경우 기존 GaAs-기반 전력증폭기에 비하여 높은 전력밀도(>x8)와 높은 효율(>20%)로 인하여 모듈 크기를 50% 이상 줄임과 동시에 경량화를 이룰 수 있어 비행기, 위성등 탑재체의 에너지 절감에 크게 기여할 수 있다. 고전력용 GaN 전력 스위칭 소자는 기존 Si-기반 IGBT에 비하여 스위칭 손실과 온-저항 손실이 낮아 30% 이상의 에너지 절감이 가능하다. 뿐만 아니라, 일본 도요타 자동차사의 보고에 의하면 HEV등 전기자동차의 DC-DC 부스터 컨버터나 DC-AC 인버터에 GaN 전력반도체를 적용할 경우 경량화, 변환효율 향상, 전용 냉각시스템을 제거할 수 있어 연료소모를 10% 이상 줄일 수 있어 연간 400불 이상의 에너지 절감 효과를 가진다. 이러한 에너지절감 효과는 미국, 유럽, 일본등 선진국을 중심으로 차세대 GaN 반도체의 신시장 개척과 선진입을 위한 치열한 경쟁 구도의 구동력이 될 것이며, 본 논문을 통하여 GaN 반도체의 연구개발 방향과 상용화의 중요성을 함께 생각해보고자 한다.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.164-170
• /
• 2012

This paper presents that the comparison results of AT (Active Transponder) positions obtained from different measurements: the result of GPS device and evaluated position from the SAR (Synthetic Aperture Radar) image, and active transponders can be useful as GCPs(Ground Control Points) in SAR images. The X-band AT are installed on the wide-and-flat area to improve SCR(signal-to-clutter ration), and activated to represent impulse response function in order to operate as one point target in SAR images. Cosmo-SkyMed operating at X-band frequency are used to provide SAR images of AT. The comparison of AT position is performed by using the result of GPS device field measurement and AT SAR images. ENVI-SARscape S/W is used to evaluate AT position in the SAR images. From the comparison, it is shown that AT are useful as GCPs for SAR images.

• Atmosphere
• /
• v.25 no.1
• /
• pp.19-30
• /
• 2015

The Ka-band cloud radar (KCR) has been operated by the National Institute of Meteorological Research (NIMR) of Korea Meteorological Administration (KMA) at Boseong National Center for Intensive Observation of severe weather since 2013. Evaluation of data quality is an essential process to further analyze cloud information. In this study, we estimate the measurement error and the sampling uncertainty to evaluate data quality. By using vertically pointing data, the statistical uncertainty is obtained by calculating the standard deviation of each radar parameter. The statistical uncertainties decrease as functions of sampling number. The statistical uncertainties of horizontal and vertical reflectivities are identical (0.28 dB). On the other hand, the statistical uncertainties of Doppler velocity (spectrum width) are 2.2 times (1.6 times) larger at the vertical channel. The reflectivity calibration of KCR is also performed using X-band vertically pointing radar (VertiX) and 2-dimensional video disdrometer (2DVD). Since the monitoring of calibration values is useful to evaluate radar condition, the variation of calibration is monitored for five rain events. The average of calibration bias is 10.77 dBZ and standard deviation is 3.69 dB. Finally, the statistical characteristics of cloud properties have been investigated during two months in autumn using calibrated reflectivity. The percentage of clouds is about 26% and 16% on September to October. However, further analyses are required to derive general characteristics of autumn cloud in Korea.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.3
• /
• pp.374-383
• /
• 2010

Microwave radar can penetrate cloud cover regardless of weather conditions and can be used day and night. Especially a ground-based polarimetric scatterometer has advantages of monitoring crop conditions continuously with full polarization and different frequencies. Kim et al. (2009) have measured backscattering coefficients of paddy rice using L-, C-, X-band scatterometer system with full polarization and various angles during the rice growth period and have revealed the necessity of near-continuous automatic measurement to eliminate the difficulties, inaccuracy and sparseness of data acquisitions arising from manual operation of the system. In this study, we constructed an X-band automatic scatterometer system, analyzed scattering characteristics of paddy rice from X-band scatterometer data and estimated rice growth parameter using backscattering coefficients in X-band. The system was installed inside a shelter in an experimental paddy field at the National Academy of Agricultural Science (NAAS) before rice transplanting. The scatterometer system consists of X-band antennas, HP8720D vector network analyzer, RF cables and personal computer that controls frequency, polarization and data storage. This system using automatically measures fully-polarimetric backscattering coefficients of rice crop every 10 minutes. The backscattering coefficients were calculated from the measured data at a fixed incidence angle of $45^{\circ}$ and with full polarization (HH, VV, HV, VH) by applying the radar equation and compared with rice growth data such as plant height, stem number, fresh dry weight and Leaf Area Index (LAI) that were collected at the same time of each rice growth parameter. We examined the temporal behaviour of the backscattering coefficients of the rice crop at X-band during rice growth period. The HH-, VV-polarization backscattering coefficients steadily increased toward panicle initiation stage, thereafter decreased and again increased in early-September. We analyzed the relationships between backscattering coefficients in X-band and plant parameters and predicted the rice growth parameters using backscattering coefficients. It was confirmed that X-band is sensitive to grain maturity at near harvesting season.

• Geophysics and Geophysical Exploration
• /
• v.15 no.1
• /
• pp.16-22
• /
• 2012

In this study, we setup a ground-based scatterometer using an antenna of which the center frequency is 9.5 GHz (X-band), and measured radar backscatterings from air/ice and ice/water interfaces to extract ice thickness. Both of air/ice and ice/water interfaces make strong radar backscatterings and so we can clearly identify two peaks in measured data by scatterometer. By using the distance of two peaks and refractive index of ice, we confirmed that it is possible to measure ice thickness. Field survey was performed at the downstream of Jiam River flowing into Chuncheon Lake. We measured radar backscattering from river ice along a survey path and extracted ice thickness. The ice thickness map of the downstream of Jiam River was produced by using kriging which is one of well known interpolation methods. The ice thickness was about 50 cm along the mainstream while ice was thin as 30 ~ 40 cm at a fast-flowing meander. Ice thickness was particularly thinner at some locations than that of surrounding areas even in the mainstream region of constant flow. This was because of impurities in ice or artificially formed refrozen holes after fishing. We expect that this study helps to expand utilization field of X-band SAR and airborne scatterometer system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.204-204
• /
• 2020

환경부는 기존 대형 강우레이더 관측망에 대한 동해안 지역 관측공백 해소와 집중호우에 의한 재해예방을 목적으로 2기의 전파강수관측소를 삼척과 울진 통고산에 구축 운영하고 있다. 본 연구에서는 삼척 및 울진 전파강수관측소 관측 자료 품질 향상을 위한 다양한 품질 분석 기법을 소개하고 그 결과를 제시한다. 설치된 전파강수관측소의 시스템 특성 중 하나인 Short/Long 펄스 신호에 따른 자료의 연속/불연속성 및 피뢰침에 의한 자료 품질, 그리고 강수에 의한 신호감쇠에 따른 유효관측거리 등을 분석하였다. 이러한 분석을 기반으로 신호보정옵셋 및 피뢰침 위치 등을 조정하여 자료 품질을 향상하였다. 또한 삼척과 울진 전파강수관측소를 대상으로 분포형 비차등위상차 산정 기술을 적용하고 그 결과를 분석하였다. 비차등위상차는 시스템 편차나 우박 등의 영향에서 자유로워 특히 전파강수관측소와 같은 X 밴드 정량강우 추정에서 중요하다. 일반적으로 비차등위상차는 차등위상차에 대한 필터링 기법으로 산출하는데, 이 방법은 약한 강수에 대해 변동성이 크며 지형에코 등에 의해 영향을 크게 받는다는 단점이 있다. 본 연구에서는 일반적인 필터링 기법에 의한 비차등위상차와 분포형 기법을 적용한 비차등위상차에 대해 비교 분석을 하였다. 전파강수관측소 강우 자료를 이용한 분포형 비차등위상차 시험적용 결과 기존 비차등위상차에 비해 정성적으로 우위를 보임을 알 수 있었다.

• Korean Journal of Remote Sensing
• /
• v.23 no.6
• /
• pp.559-566
• /
• 2007

The generation of precise digital elevation model (DEM) is very important in coastal area where time series are especially required. Although a LIDAR system is useful in coastal regions, it is not yet popular in Korea mainly because of its high surveying cost and national security reasons. Recently, precise DEM has been made using radar interferometry and waterline methods. One of these methods, spaceborne imaging radar interferometry has been widely used to measure the topography and deformation of the Earth. We acquired ALOS PALSAR FBD mode (Fine Beam Dual) data for evaluating the quality of interferograms and their coherency. We attempted to construct DEM using ALOS PALSAR pairs - One pair is 2007/05/22 and 2007/08/22, another pair is 2007/08/22 and 2007/10/22 with respective perpendicular baseline of 820 m, 312m and respective height sensitivity of 75 m and 185m at southern of Ganghwa tidal flat, Siwha- and Hwaong-lake over west coastal of Korea peninsula. Ganghwa tidal flat has low coherence between 0.3 and 0.5 of 2007/05/22 and 2007/08/22 pair. However, Siwha-lake and Hwaong-lake areas have a higher coherence value (From 0.7 and 0.9) than Ganghwa tidal area. The reason of difference coherence value is tidal condition between tidal flat area (Ganghwa) and reclaimed zone (Siwha-lake and Hwaong-lake). Therefore, DEM was constructed by ALOS PALSAR pair over Siwha-lake and Hwaong-lake. If the temporal baseline is enough short to maintain the coherent phases and height sensitivity is enough small, we will be able to successfully construct a precise DEM over coastal area. From now on, more ALOS PALSAR data will be needed to construct precise DEM of West Coast of Korea peninsular.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.347-353
• /
• 2020

In this paper, the durability of an electromagnetic metamaterial absorber is verified in a temperature varying condition mimicking a maritime environment for the purpose of applying it to reduce the radar cross section of an integrated mast of the next-generation destroyer. To validate the durability, the reflectance of the electromagnetic metamaterial absorber was measured after storing it in a chamber that can control the temperature according to Procedure I of Method 501.7 included in MIL-STD-810H. Before and after the environmental test, both of the measured reflectances were retained less than -10 dB over the X band, that can guarantee the stealth functionality.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.10
• /
• pp.1204-1211
• /
• 2012

Measurement and analysis results of the extracted radiation-patterns from the field-experiments which were conducted to acquire the generic technology for calibration and validation of the satellite SAR system(Synthetic Aperture Radar) are presented in this study. Prototype of active transponder is adjustable within maximum 63.1 dBsm of RCS (Radar Cross Section) and includes the receiving-function with external receiver. To increase an accuracy of these field experiments, we repetitively measured satellite SAR systems of the same operating mode(i.e., COSMO-SkyMed No. 2 & 3, hh-pol., strip-map himage mode, 3 m resolution). Then, the reliability of experimental results was cross-checked through analysis of the RCS of active transponder on SAR image. The property of azimuth radiation patterns of satellite SAR system extracted from them has $0.352^{\circ}$ of HPBW(half-power beamwidth), $0.691^{\circ}$ of FNBW(first-null beamwidth), and 11.17 dB of PSLR(peak to side lobe ratio), respectively.