• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.413-419
• /
• 2011

Diagnosis X-ray equipment localized at 1950's but it is developed suddenly at 1960's with demand together. Manufacture of Diagnostic X-ray equipment is controled by the KS regulation and the Ministry of Health and Welfare because of hazardous element etc. exposure by radiation. Most of diagnostic X-ray equipment ware single phase and three phase full-wave rectification but from 1980's it transforms it was exchanged in inverter type X-ray equipment. Inverter type X-ray equipment produces approximately 50~80% more average photon intensity then single phase full-wave rectification and the accuracy is high. But from a clinic it dose not use because expensive therefor the efficiency improvement of single phase full-wave rectification is necessary. We produced single phase full-wave rectification X-ray equipment control unit, high tension transformer, filament heating transformer, rectification circuit, high tension cable and others and evaluated efficiency, in result which is excellent compare with Rule of Safety Management and KS regulation.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.77-78
• /
• 2013

진단용 X선 투시촬영장치는 고전압발생장치를 필요로 하며, 이에 대용량 전원설비를 갖춘 X선 고전압 발생장치의 개발이 요구되고 있다. X선 투시촬영장치는 단시간 고출력의 촬영과 장시간 저출력의 투시가 가능해야 하므로 고용량의 상용 AC 전원을 사용해야 한다. 이에 본 논문에서는 EDLC를 에너지 저장장치로 사용하여 저용량의 AC전원만으로 투시 및 촬영이 가능한 X선 투시촬영장치용 고전압발생장치를 제안한다. 에너지 저장장치를 기반으로 한 32[kW]급의 X선 투시촬영장치용 고전압발생장치를 구성하고 시뮬레이션 통하여 제안한 고전압발생장치의 효용성을 입증한다.

• The Journal of the Korea Contents Association
• /
• v.10 no.9
• /
• pp.267-275
• /
• 2010

Quality management of an x-ray unit drastically differs according to the type of establishment of medical institutions. Many primary medical institutions have it, but they do not pay much attention to quality management. In the study, Gyeongbuk area has been divided into four zones from January 4, 2010 to September 3, 2010, and four places were designated by city. Among medical institutions located at a total of 16 sites, the target was 8 places with X-ray emission equipment 10 years or more in use as well as 8 places with X-ray emission equipment less than 10 years in use. The 5 essential items of quality control were tested. In the test that checked for equipment it was found that sites with X-ray emission equipment 10 years or more in use didn't have ground connection (6.25%) while all of them passed the current leak test. In the exposure dose reproducibility test 4 sites with X-ray emission equipment 10 years or more in use (25%) and 1 site with X-ray emission equipment less than 10 years in use didn't pass the test. In the KVp accuracy test 5 sites with X-ray emission equipment 10 years or more in use (31.25%) and 2 sites with X-ray emission equipment less than 10 years in use (12.5%) didn't pass the test. In the tube current and tube current amount test 3 sites with X-ray emission equipment 10 years or more in use (18.75%) and 1 site with less than 10 years in use (6.25%) didn't pass the test. According to the findings of the present research, quality control at medical institutions with X-ray equipment 10 years or more in use was poorer than medical institutions with X-ray equipment less than 10 years in use. In this regard, administrative and technical measures need to be taken as soon as possible. In addition, owners of medical clinics or unit managers need to raise awareness, and it is necessary to revise a regular test cycle every year or every two years if they have old equipment or if the equipment is not used on a frequent basis. And it is also important to provide regular educational programs for quality management.

• Journal of dental hygiene science
• /
• v.15 no.3
• /
• pp.254-258
• /
• 2015

To compare the stationary dental X-ray generator and the portable dental X-ray generator and to understand spatial radiation dose depended on locations by measuring spatial radiation dose of the portable dental X-ray generator. The researchers used an Ionization chamber to measure spatial radiation dose which was generated while applying X-ray radiation to real bone skull phantom with both portable and stationary dental X-ray generator. There were 4 measurement locations which were immediate anterior, right, left and posterior. Distance of measurement was 50 cm in every location and the recorded result is an average of two applications of X-ray radiation to the maxillary molar area under the condition of 70 kVp, 3 mA, 0.1 sec. Average spatial radiation dose of portable X-ray generator was $37.51{\mu}Sv$, much higher than that of stationary X-ray generator which was $10.77{\mu}Sv$ (p<0.001). The result of the spatial radiation dose of the portable X-ray generator showed a huge difference depending on types of units which varied from $17.77{\mu}Sv$ to $68.90{\mu}Sv$ (p<0.05), also depending on the measurement location, immediate anterior resulted in the highest radiation dose of $54.14{\mu}Sv$ and immediate right was the lowest of $13.60{\mu}Sv$. Immediate left and posterior, however, resulted in similar radiation dose which were $42.12{\mu}Sv$, $40.18{\mu}Sv$ (p<0.01). With this result, we claim that usage of portable dental X-ray generator should be restricted to patients who can't move and exposure to radiation should be minimized by wearing lead-apron.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.263.1-263.1
• /
• 2013

탄소나노튜브(CNT)를 이용한 초소형 X선 튜브는 근접 암치료, 비파괴 X선 영상 장치, 휴대용 X선 분광계 등에서 X선 발생소스로 많이 연구되고 있다. 2극형 CNT 에미터의 경우 구조가 단순하여 초소형 X선 튜브에 쉽게 장착할 수 있지만 아노드의 전압과 전류가 연동되기 때문에 튜브의 조작성이 제한적이다. 3극형은 상대적으로 복잡한 구조이고, CNT에서 방출된 전자가 게이트 전극으로 흐르는 누설 전류 그리고 절연체와 충돌하여 차징을 발생시킬 수 있기 때문에 직경이 좁은 초소형 X선 튜브에 구현하기가 쉽지 않다. 하지만 초소형 X선 튜브를 다양한 X선 장치에 응용하기 위해서는 아노드 전압과 전류의 독립된 조작이 가능한 3극형 CNT 에미터가 반드시 구현되어야 한다. 본 발표에서는 전자빔의 아노드 집속을 강화하고 절연체에서의 차징을 줄이는 포커싱 기능의 게이트(FFG) 구조를 제안하였고. 이를 적용하여 초소형 X선 튜브들을 제작하고, 분석하였다. FFG 구조가 성공적으로 적용된 초소형 X선 튜브는 게이트 누설 전류 없이 뛰어난 전류 및 X선 방출 특성을 보였다. 이와는 달리, 몇몇 초소형 X선 튜브들에서는 게이트 누설 전류가 나타났고, 아노드 전압에 의한 게이트 전압 상승이 발생하여 불안정한 구동 특성을 보였다. 초소형 X선 튜브를 밀봉하지 않고 진공 챔버에서 실험한 결과, 유도된 게이트 전압은 상당한 시간이 흐르거나 진공챔버에 공기를 주입하고 다시 진공상태로 만들면 유도전압이 제거되는 것을 볼 수 있었다. 결론적으로 CNT에서 방출된 전자빔이 정상궤도를 벗어나 게이트 누설전류와 차징에 의한 게이트 유도전압을 발생시키면 초소형 X선 튜브가 불안정한 구동을 하고, 결국 튜브의 심각한 결함으로 나타나게 된다. 즉, 게이트 누설 전류와 유도된 게이트 전압은 3극형 CNT 에미터가 장착된 초소형 X선 튜브의 디자인과 제작에 있어서 성공 기준이 될 수 있다.

• Journal of the Korean Society of Radiology
• /
• v.9 no.3
• /
• pp.131-137
• /
• 2015

The purpose of this study is to warm up the conventional X-ray table by inventing and design for X-ray table with an attached heating device using less unloaded X-ray, CNT (carbon nano tube) heating element. Configuration of the product design for adhesive carbon heating element X-ray is composed of a conventional X-ray table, carbon nano tube planar heating element, an electrode line, flame resisting protective film, and the bottom film. Characteristics and advantages of this invented product is to provide gentle feeling, the sense of security, and eliminating anxiety to the patient wearing a patient gown and feel the cool air while receiving the test. Thus we are strongly recommend to use this device in the clinical situation.

• Journal of the Korean Society of Radiology
• /
• v.12 no.7
• /
• pp.887-893
• /
• 2018

The purpose of this study is to compare the performance of X-ray generators installed in hospitals and universities and apply the quality control items of diagnostic X-ray generators to recognize the importance of periodic performance management. First, the reproducibility and linearity test results showed that the PAE of the reproducibility evaluation was high for the GX-650 devices that met the acceptance criteria in all the experimental conditions and lacked the periodic quality control. In the linearity evaluation, when the tube voltage was set to 100 kVp, It was measured to deviate from the error. In addition, it was found that the PAE in the low-accuracy evaluation results relative to an X-ray tube voltage and tube current of the device low occurrence frequency. The HVL experiment was included in all of the devices at the HVL by tube voltage. Therefore, it is necessary to recognize the importance of quality control of all devices rather than hospital and laboratory, and to manage the device performance by actively managing the device, and to establish a short - term quality control system like special medical devices.

• Journal of radiological science and technology
• /
• v.27 no.4
• /
• pp.23-29
• /
• 2004

The application of analytical model(Archer et al. 1983) to shielding calculations in diagnostic radiology combined with measurements of the broad beam transmission properties of lead, steel, concrete, and plate glass for x-ray tube potential of 60-140 kVp using an x-ray inverter generator and total initial beam filtration sufficient to provide half-valve layer representative of those found in common practice and required by regulatory agencies. Our transmission measurements and numerical fits to the mathematical model of broad beam transmission(Archer et al. 1983) will assist medical or health physicist faced with the task of designing protective barriers for medical diagnostic x-ray facilities.

• 전기의세계
• /
• v.34 no.9
• /
• pp.548-552
• /
• 1985

서울대학교 병원에서는 약2년간의 이분야에 대한 기초 및 임상연구 결과를 토대로 하여 D.S.R.System을 개발하고 있다. 현재 개발하고 있는 Systme은 다음과 같다. 1) X선 발생장치 및 Control부분 2) 산란효과 제거를 위한 fore-slit 및 after-slit과 구동장치 3) X선을 광신호로 변환하기 위한 rare earth screen과 광신호를 전기적인 신호로 변환시키기 위한 photo-diode array detector의 결합체, 4) data 수집부분, 증폭장치와 A/D변환기, 고속 data 저장용 기억장치 부분 5) data 처리와 display를 위한 Bit-slice processor 5) Picture Archiving and Communication Systems (PACS) 이러한 부분 이외에 SNR을 향상시키고 좁은 부위의 region of interest를 보다 정확하게 관찰하기 위해서 511p/mm의 고밀도 선형검출기를 병행으로 사용하고 있다. 이 선형검출기를 이용하여 일부의 영상을 관찰하여 그 결과를 Wiener filter 등의 방법의 매개변수 선정에 이용하여 전체적인 영상의 질을 향상시키고자 하는 것이다.

• Journal of dental hygiene science
• /
• v.14 no.4
• /
• pp.442-447
• /
• 2014

The aim of this study was to analyze perception of risk and using status of hand-held dental x-ray unit among dental hygienists in metropolitan area. This research was based on perception of risk and using status of hand-held dental x-ray unit survey in 257 dental hygienists from July 7 to 31, 2014. Data were analyzed with t-test, one way ANOVA, and multivariable logistic regression analysis using SPSS Windows 21.0 program and significance level was set at p<0.05. The hand-held dental x-ray unit to cover all type patients was 24.8%. The 62.6% of patients and 81.3% of operator doesn't wear lead apron, the experience rate of radiation education was 40.1%. The average of risk perception was 3.08 points. The associated factors of risk perception were career, number of radiation exposure per day, and possession of fixed x-ray unit. The increased of accumulated dose when the occupationally exposed work continues, it is necessary to effort of defense against dental radiation.