• Journal of the Korean Wood Science and Technology
• /
• v.24 no.3
• /
• pp.72-79
• /
• 1996

Cellulose I에서 Cellulose II로의 결정변태기구를 X선 및 전자선 회절법과 현미경적 방법을 이용하여 구명하였다. X선 회절 결과, Na-cellulose I을 고온에서 수세할 경우 Cellulose I과 Cellulose II의 혼합형 회절도가, 저온에서 수세할 경우 Na-cellulose IV의 회절도가 얻어졌다. 전자선회절 결과, 고온수세의 시료는 Cellulose I과 Cellulose II의 혼합형이 저온수세의 시료는 Cellulose II의 회절도가 얻어졌다. 또한 고온수세 시료의 전자선회절도로부터 섬유벽의 내측부가 외측부보다 재생 Cellulose I의 양이 많은 것이 확인되었다. 따라서 알칼리 팽윤시 섬유벽내에는 불완전한 팽윤이 발생하는데 그 정도는 내측부가 더욱 심한 것으로 생각된다. 이때 형성되는 불완전한 Na-cellulose I 은 고온 수세의 경우는 탈수에 의해 Cellulose I로, 저온수세의 경우는 수화에 의해 Cellulose II로 변태되지만 완전히 팽윤된 Na-cellulose I은 Cellulose I로 재생될 수 없는 것으로 생각된다. 현미경적 실험결과, mercerization과정에서 cellulose 분자쇄의 packing이나 conformation의 변화와 관련하여 microfibril 의 흐트러짐은 발생하지 않는 것으로 생각되었다.

• Ceramist
• /
• v.5 no.2
• /
• pp.17-23
• /
• 2002

• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.175-177
• /
• 2003

삼팔면체 운모의 결정구조에 대한 연구는 많은 학자들에 의해 진행되어 왔다. 하지만 주로 X선 단결정법을 이용하였기 때문에 수소에 대한 정보는 부족하다. 온도의 증가나 풍화에 의해 결정구조의 변화는 수산화기의 길이나 방향성에 영향을 주는데 위와 같은 X선에 의한 연구로는 한계를 가지게 된다. 이러한 단점을 극복하기 위한 방법으로 중성자 단결정법이나 중성자분말회절법을 사용할 수 있으나 중성자 단결정법은 일정크기 이상($5{\times}5{\times}0.4$mm, Rayner 1974)의 완전한 단결정을 대상시료로 이용해야 하는 단점이 있다. (중략)

• Journal of Welding and Joining
• /
• v.12 no.4
• /
• pp.141-150
• /
• 1994

The residual stress is inevitably introduced into composites because of the mismatch of the coefficient of thermal expansion, and it is different in each phase. The X-ray technique can detect separately the stress in each phase, so will wield useful information for analyzing the toughening mechanisms of composites. In order to apply the law of mixture to alloy steels with composite microstructures, two phase stainless steel, consisted of ferrite (.alpha.-Fe) and austenite (.gamma.-Fe) structures, was selected. The tensile elastic deformation was loaded, and then the X-ray diffraction technique was used to measure the X-ray elastic constants, the X-ray stress constants and the phase stresses. The law of mixture was investigated and the separation of macrostress and microstress was carried out. The phase stresses (the residual stresses of phase) in each phase, which were measured by X-ray technique, was directly proportional to the applied stress. The macrostress calculated from the phase stresses by using the law of mixture was nearly equal to the applied stress.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.664-664
• /
• 2001

The mechanical alloying (MA) effect in $\sigma$-VFe intermetallic compound was studied by neutron and X-ray diffraction. The structure of MA $\sigma$-VFe powders were characterized by the X- ray diffraction with Cu- $K\alpha$ radiation and neutron diffraction with monochromatic neutrons of $1.835\AA$ using a high resolution powder diffractometer (HRPD). Mechanical alloying of $\sigma$-VFe compound gives rise to a dramatic structural change. After 60 hours of MA, the Fe-Fe distribution of the $\sigma$- phase VFe tetragonal structure with 30 atoms in a unit cell is found to change into that of the $\sigma$-(V,Fe) solid solution with bcc structure, which is a stable phase at elevated temperature above $1200^{\circ}C$. A comparison of X-ray diffraction data for the $\alpha$-phase has been also made with the corresponding neutron diffraction data. The (101) and (111) diffraction peaks of the $\sigma$-phase was clearly observed only in neutron diffraction pattern, which is believed to be a characteristic feature due to the chemical atomic ordering of $\sigma$- VFe phase.

• Korean Journal of Materials Research
• /
• v.6 no.8
• /
• pp.796-800
• /
• 1996

질소가스 분위기 중에서 Cu30V70 및 Fe30Cr70 혼합분말을 기계적 합금화 (MA)처리한 결과, 두 합금계에서 비정질화가 관찰되었다. 결정질에서 비정질상으로의 구조변화 과정을 Xtjs 회절 및 중성자 회절법에 의해 관찰되었다. 결정질에서 비정질상으로의 구조변화 과정을 X선 회절 및 중성자 회절법에 의해 관찰하였다. 그 결과, 이 합금계에서의 비정질화는 각 결정구조에서 전형적으로 존재하는 8면체 unit가 선택적으로 붕괴되어 4면체 unit로 변화되어 가는 과정임을 알 수 있었다. 또한, 중성자회절 결과로부터 질소원자는 금속원자로 이루어진 4면체의 중심에 위치하고 있음을 알 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.3
• /
• pp.208-215
• /
• 2009

As a fundamental study to develop absorbing materials on harmful volatile organic compounds (VOC) such as formaldehyde, structural and crystalline characteristics of MDF carbonized at different temperatures were examined by a scanning electron microscope and an X-ray diffraction method. Fibers in surface layer of MDFs showed more compressed morphology than those in middle layer of MDFs, but the porosity of MDFs increased with increasing the carbonized temperature. The wrinkle shape was frequently surfaces of cell walls was more severe than that at the lumina of cells. The shape of pits in the fibers of carbonized MDFs were hardly changed. The cell walls of MDFs carbonized at $400^{\circ}C$ and over showed an amorphous-like structure without cell layering. X-ray diffratograms from the MDFs carbonized at $400^{\circ}C$ showed a trace of crystalline cellulose. On the other hand, an amorphous diffraction pattern from carbons was obtained with the MDFs carbonized at $1,000^{\circ}C$.

• Journal of Korea Foresty Energy
• /
• v.18 no.2
• /
• pp.62-69
• /
• 1999

Lignin in wood cell walls influeced the transformation of the cellulose crystal structure during mercerization. Samples of sound and decayed woods by white rot fungus of Quercus mongolica were treated with 20% aquous NaOH solution, followed by washing and drying, and delignified. The effect of delignification on cellulose structure was investigated by a series of an X-ray diffraction analysis and ultraviolet(UV) microscopy. Delignification of alkali-treated woods did not influence their cellulose crystal structures. It may be concluded that lignin prevents the swelling of wood cellulose during mercerization and restrain the intermingling of cellulose chains.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.661-665
• /
• 2001

The mechanical alloying (MA) effect in $\sigma$-VFe intermetallic compound was studied by neutron and X-ray diffraction. The structure of MA $\sigma$-VFe powders were characterized by the X- ray diffraction with Cu- $K\alpha$ radiation and neutron diffraction with monochromatic neutrons of $1.835\AA$ using a high resolution powder diffractometer (HRPD). Mechanical alloying of $\sigma$-VFe compound gives rise to a dramatic structural change. After 60 hours of MA, the Fe-Fe distribution of the $\sigma$- phase VFe tetragonal structure with 30 atoms in a unit cell is found to change into that of the $\sigma$-(V,Fe) solid solution with bcc structure, which is a stable phase at elevated temperature above $1200^{\circ}C$. A comparison of X-ray diffraction data for the $\alpha$-phase has been also made with the corresponding neutron diffraction data. The (101) and (111) diffraction peaks of the $\sigma$-phase was clearly observed only in neutron diffraction pattern, which is believed to be a characteristic feature due to the chemical atomic ordering of $\sigma$- VFe phase.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.1
• /
• pp.40-47
• /
• 2002

This study was carried out to investigate the dimensional stability of three softwoods (Pinus densiflora S. et Z., Pinus koraiensis S. et Z., Larix kaempferi C_ARR.) and two hardwoods(Quercus mongolica F., Quercus variabilis B_L.) treated with polyethylene glycol(PEG). Existence of PEG in wood was examined by an X-ray diffraction method. Shrinkage of the sample woods decreased with increasing concentration of PEG. The dimensional stability of five species had improved highly in thirty percent solutions of PEG with molecular weight 1000~4000, and the dimension of PEG-treated softwoods was more stable than that of PEG-treated hardwoods. Weight gain and bulking effect of the woods treated with PEG increased with increasing concentration of PEG. X-ray diffractograms of Pinus koraiensis wood treated with PEG showed two peaks derived from PEG crystal at 2𝜃 = 19° and 2𝜃 = 23°. However, the diffractograms of Quercus mongolica wood did not present any peaks caused by PEG crystal. From the result of X-ray diffraction, it was revealed that the content of PEG in Pinus koraiensis wood was higher than that in Quercus mongolica wood.