• Journal of the Korean Data and Information Science Society
• /
• v.25 no.4
• /
• pp.791-798
• /
• 2014

Wu and Clements-Croome (2005) suggest the preventive maintenance (PM) model with random maintenance quality. They assume that each PM resets the failure rate to zero and the rate of increases of the failure rate gets higher after each additional PM. However a system may not be restored to as good as new immediately after the completion of PM. Thus, this paper modifies the Wu and Clements-Croome's PM model and then the optimal PM policy is suggested. To determine the optimal PM policy, we utilize the expected cost rate per unit time for our model. That is, we obtain the optimal number and the optimal period by minimizing the expected cost rate per unit time. The numerical examples are presented for illustrative purpose.

• Steel and Composite Structures
• /
• v.15 no.6
• /
• pp.659-677
• /
• 2013

This paper introduces new specimens of Steel-Carbon Fibre Reinforced Polymer composite developed in accordance with standard test method and definition for mechanical testing of steel (ASTM-A370). The main purpose of this research is to study the behaviour of steel-CFRP composite specimen under uniaxial tension to use it in beams in lieu of traditional steel bar reinforcement. Eighteen specimens were prepared and divided into six groups, depending upon the number of the layers of CFRP. Uniaxial tensile tests were conducted to determine yield strength and ultimate strength of specimens. Test results showed that the stress-strain curve of the composite specimen was bilinear prior to the fracture of CFRP laminate. The tested composite specimens displayed a large difference in strength with remarkable ductility. The ultimate load for Steel-Carbon Fibre Reinforced Polymer composite specimens was found using the model proposed by Wu et al. (2010) and nonlinear FE analysis. The ultimate loads obtained from FE analysis are found to be in good agreement with experimental ones. However, ultimate loads obtained applying Wu model are significantly different from experimental/FE ones. This suggested modification of Wu model. Modified Wu's model which gives a better estimate for the ultimate load of Steel-Carbon Fibre Reinforced Polymer (SCFRP) composite specimen is presented in this paper.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.9
• /
• pp.5361-5365
• /
• 2013

The objective of this study was to evaluate the influence of a genetic variant in the multidrug resistance 1 gene (MDR1) on hepatocellular carcinoma (HCC) risk. This case-control study was conducted in a Chinese population of 645 HCC cases and 658 cancer-free controls. The genotype of the c.3751G>A genetic variant in the MDR1 gene was investigated by created restriction site-polymerase chain reaction (CRS-PCR) and DNA sequencing methods. Our data demonstrated significantly differences detected in the allelic and genotypic frequencies between HCC cases and those of cancer-free controls. Association analyses indicated that there were statistically increased risk of HCC in the homozygote comparison (AA versus (vs.) GG: OR=2.22, 95% CI 1.51-3.27, ${\chi}^2$=16.90, P<0.001), dominant model (AA/GA vs. GG: OR=1.25, 95% CI 1.00-1.55, ${\chi}^2$=3.98, P=0.046), recessive model (AA vs. GA/GG: OR=2.14, 95% CI 1.47-3.09, ${\chi}^2$=16.68, P<0.001) and allele comparison (A vs. G: OR=1.33, 95% CI 1.13-1.57, ${\chi}^2$=11.66, P=0.001). The allele-A and genotype-AA may contribute to HCC susceptibility. These preliminary findings suggest that the c.3751G>A genetic variant in the MDR1 gene is potentially related to HCC susceptibility in a Chinese Han population, and might be used as a molecular marker for evaluating HCC susceptibility.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.11
• /
• pp.80-85
• /
• 2001

In Part 2, dynamic cutting force model, thermal behavior model, and feed drive model are presented for development of a virtual machine tool. Some relevant results with brief descriptions for each model are presented to verify the proposed models. Experimental results for each model agreed well with the estimated ones. The developed models in this two-part paper are partially integrated as a comprehensive software environment.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.3
• /
• pp.42-47
• /
• 2003

In Part 2 of this paper, the dynamic cutting force model, thermal behavior model, and feed drive model used in the development of a virtual machine tool (VMT) are briefly described. Some results are presented to verify the proposed models. Experimental data agreed well with the predicted results fer each model. A comprehensive software environment to integrate the models into a VMT is also proposed.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.205-206
• /
• 2003

• Cross-Cultural Studies
• /
• v.38
• /
• pp.385-404
• /
• 2015

Compiled in 776 by Zhang Shen, Wu Jing Wen Zi was regarded as the epitome of model book for standardized regular script in Tang Dynasty. Following early works like Shuo Wen Jie Zi, Zhang Shen adopted radical-rule for the compilation of this work. 3,250 characters were selected from the Five Classics and 160 radicals were established. Yu Jiaxi (1884-1955) harshly criticized the radical system of Wu Jing Wen Zi for being inconsistant and confusing. With careful review and analysis of examples from Wu Jing Wen Zi, this paper discusses the pupose of the compilation of this work, its unique radical-rule system, principles of arrangement of characters with the same or similar radicals, and the differentiation of variant characters. It further discusses the value of Wu Jing Wen Zi by its innovative radical-rule and effective differentiation of variant characters. It concludes with a rebuttal of Yu Jiaxi's argument and restate the necessity of reevaluation of this work even to this day.

• Computational Structural Engineering : An International Journal
• /
• v.1 no.1
• /
• pp.39-48
• /
• 2001

An analytical compressive stress-strain relationship model for circular and rectangular concrete specimens confined with laminated carbon fiber sheets (CFS) is studied. Tsai-Hill and Tsai-Wu failure criteria were used to implement orthotropic behavior of laminated composite materials. By using these criteria, an algorithm which analyzes the confinement effect of CFS on concrete was developed. The proposed analytical model was verified through the comparison with experimental data. Various parameters such as concrete strength, ply angle, laminate thickness, section shape, and ply stacking sequences were investigated. Numerical results by the proposed model effectively simulate the experimental compressive stress-strain behavior of CFS confined concrete specimens. Also, the pro-posed model estimates the compressive strength of the specimen to a high degree of accuracy.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.4
• /
• pp.631-639
• /
• 2005

In this paper, we propose a constructive realization procedure for 2D systems which may lead to a Fornasini-Marchesini local state-space model with much lower order than the existing realization procedure given by Bisiacco et al. Nontrivial examples are illustrated and the conditions for minimal realization are also discussed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.729-731
• /
• 2008

Three-dimensional unsteady simulation using RNG $\kappa-\varepsilon$ turbulence model is used in full flow passage of model Kaplan turbine. Then the pressure pulsation is obtained. Monitoring data of pressure pulsation in the turbine is obtained through experiment and is compared with the numerical simulation. And a good coherence is shown between the simulation and the experiment. Then the regularity of the pressure pulsation s distribution and transmission in the turbine is discussed in detail.