• 제목/요약/키워드: Wrist Guard

검색결과 7건 처리시간 0.018초

미세전류 손목 보호대 착용이 손목터널증후군 노인 여성의 통증 척도, 관절가동범위 및 근력에 미치는 영향 (Effects of Wearing a Microcurrent Wrist Guard on Pain Scale, Range of Motion, and Muscle Strength in Elderly Women with Carpal Tunnel Syndrome)

  • 박혜선;박진희;김주용
    • 패션비즈니스
    • /
    • 제27권5호
    • /
    • pp.1-12
    • /
    • 2023
  • The purpose of this study was to investigate impact of wearing low-level current wrist guards on pain scale, range of motion (ROM), and muscle strength in elderly women with Carpal Tunnel Syndrome (CTS). Subjects were 12 elderly women aged between 65 and 85 years who were diagnosed with CTS symptoms. Measurements included grip strength and wrist ROM. Wrist ROM was assessed through flexion and dorsiflexion. Wrist guards were worn. After two weeks, pain level was assessed using the Visual Analogue Scale (VAS). Results showed a significant reduction in VAS score in the MES group after stimulation, whereas there was no difference in the control group. However, there was no significant difference in ROM between the MES group and the control group. Grip strength increased in the MES group after two weeks (p ≤ 0.001). In conclusion, clinical trials suggest that MES wrist guards might be provided as an adjunctive treatment method for CTS patients. This study provides foundational data for the design and use of auxiliary devices such as gloves in the field of MES research for pain reduction, ROM improvement, and muscle strength enhancement resulting from CTS.

Biomechanical Effect of In-line Skating Wrist Guards on the Prevention of Wrist Fracture

  • Lim, Tae-Hong;Linda M. McGrady;Peter Hoepfner;Craig C. Young;William G. Raasch;Han, Jung-Soo
    • Journal of Mechanical Science and Technology
    • /
    • 제15권7호
    • /
    • pp.1072-1076
    • /
    • 2001
  • A biomechanical study was conducted in this study to investigate if in-line skating wrist guards can effectively reduce the impact forces so as to protect the wrist from fracture. The forearm specimens with and without wrist guards were dropped using a specially designed sled to simulate the impact on the wrist while falling. A force plate was used to measure the total impact force on the dropping weight whereas a load cell was attached to the proximal end of the specimen and used to quantify the impact transmitted through the wrist joint. From the non-destructive tests, mean peak force measured from a force plate showed no difference between the guarded and unguarded groups whereas mean impulse of the guarded group was significantly greater than that of the unguarded group (p<0.01). Comparing the peak force and impulse measured from the load cell, the peak force of the guarded group was significantly less than that of the unguarded group (p<0.001), while the impulse values were similar. When the specimens were dropped from a higher position (2.5ft ve. 1ft), all unguarded specimens had severe wrist fractures whereas fracture was found in three out of 5 guarded specimens. Comparison of mean peak forces and impulses showed as significant difference between the guarded and unguarded groups only in the mean impulse measured from the force plate. These results suggest that the wrist guard may protect the wrist by attenuating the peak force transmitted to radius and ulnar although it may not be effective when the wrist is subjected to an impact sufficiently large to cause fractures.

  • PDF

Numerical study of 10-year-old child forearm injury

  • Mao, Haojie;Cai, Yun;Yang, King H.
    • Advances in biomechanics and applications
    • /
    • 제1권3호
    • /
    • pp.143-158
    • /
    • 2014
  • Forearm fractures in children are very common among all pediatric fractures. However, biomechanical investigations on the pediatric forearm are rather scarce, partially due to the complex anatomy, closely situated, interrelated structures, highly dynamic movement patterns, and lack of appropriate tools. The purpose of this study is to develop a computational tool for child forearm investigation and characterize the mechanical responses of a backward fall using the computational model. A three-dimensional 10-year-old child forearm finite element (FE) model, which includes the ulna, radius, carpal bones, metacarpals, phalanges, cartilages and ligaments, was developed. The high-quality hexahedral FE meshes were created using a multi-block approach to ensure computational accuracy. The material properties of the FE model were obtained by scaling reported adult experimental data. The design of computational experiments was performed to investigate material sensitivity and the effects of relevant parameters in backward fall. Numerical results provided a spectrum of child forearm responses with various effective masses and forearm angles. In addition, a conceptual L-shape wrist guard design was simulated and found to be able to reduce child distal radius fracture.

Stress Fracture of the Capitate

  • Cho, Hyung Joon;Hong, Ki Taek;Kang, Chang Ho;Ahn, Kyung-Sik;Kim, Yura;Hwang, Sung Tae
    • Investigative Magnetic Resonance Imaging
    • /
    • 제22권2호
    • /
    • pp.135-139
    • /
    • 2018
  • Most capitate fractures occur in association with additional carpal injuries, particularly scaphoid fractures. Isolated fractures of the capitate account for only 0.3% of carpal injuries, and stress fractures are one form of this fracture. We report the case of a 20-year-old male who had a stress fracture of the capitate after serving as an honor guard in the military. Conventional radiographs and computed tomography of the right wrist revealed a minimally displaced fracture line located at the midcarpal aspect of the right capitate. A magnetic resonance imaging scan demonstrates a subarticular capitate fracture with diffuse bone marrow edema, small osteophytes, and irregularity of the midcarpal articular cartilage. We also review the carpal kinematics which possibly caused the stress fracture. Although stress fractures of the capitate are rare, they should also be accounted for with patients who perform repetitive motions of the wrist to a considerable extent.

안전난간유형에 따른 작업자 안전의 상관관계에 대한 실험적 연구 (An Experimental Study on the Correlationship Between Highrised Safetyguard and Workers' Safety)

  • 손기상
    • 한국안전학회지
    • /
    • 제16권2호
    • /
    • pp.80-84
    • /
    • 2001
  • Work stress and health are very important factors related to workers' condition and work safety, Author has conducted a couple of tests to check up three people's pulses before they work during their work for three types of safety guard in construction site. Work type, age, weight, sex experience year, ambient temperature n recorded as variables in this study. These are checked and asked by the author directly, before their pulse check Also, workers' Pulses were measured at height H-0 and H-9.0m to understand psychological the degree of psychological nervousness degree. POLAR protrainer NVTM HRM system(wrist recorder and sensor) was used for the site test. There are three(3) different types of construction safety guard which have been used for, this study. They are usually or frequently used and found in the site. Four different ranges of age groups(20's, 30's 40's, 50's) carpenters are assisted to the test sites with wearing pulse recorder and sensor respectively. All three types of safety guards have the same height 90㎝ even though they are different types. On top of five(5) stories tublar framed scaffolding is fabricated, similar to the one in site, where those safety guards are installed. The older(=more experienced) the workers are the more stable they are. it is shown. Also, It is verified the visually uncomfortable rail type can cause workers to psychologically be unstable.

  • PDF

정조대 <서장대야조도(西將臺夜操圖)>의 관직자 복식 고증 (Features of the Costumes of Officials in the King Jeongjo Period Seojangdaeyajodo)

  • 이은주;김영선;이경희
    • 헤리티지:역사와 과학
    • /
    • 제54권2호
    • /
    • pp.78-97
    • /
    • 2021
  • 1795년 윤2월 12일 서장대에서 행해진 군사훈련을 그린 <서장대야조도(西將臺夜操圖)>를 중심으로 관직자의 유형별 복식과 유형별 복식의 구성에 따른 특징을 고찰하였으며 고증 결과는 다음과 같다. 첫째, 서장대 안팎에서 왕 가까이에 위치한 관직자는 모두 34명인데 당상관 27명, 당하관 7명이었다. 34명 관직자의 복식 유형은 모두 3종으로 갑주·융복·군복으로 분류되었는데 그 중 갑주 착용자 12명은 모두 당상관이었고, 융복 착용자 5명은 당상관이었으며, 군복 착용자는 당상관 11명과 당하관 6명이었다. 둘째, 갑주의 형태 고증은 말 타기에 적합한 여반 장군의 갑옷 유물과 『무예도보통지』의 갑주 그림을 참조하고, 착용의 실용성을 고려하여 갑옷의 구성품을 정하였다. 갑주의 구성품은 투구, 갑의, 갑상, 호항, 호액, 비갑에 골미를 추가하였다. 갑주 색상은 <서장대야조도> 갑주에서 가장 표현 빈도가 높은 홍색과 녹색으로 고증하였다. 셋째, 당상 융복의 구성은 호수를 장식한 주립, 남색 철릭, 홍색 광다회, 정, 수화자로 고증하였다. 넷째, 군복 구성은 안을 올린 전립, 동다리, 전복, 요대, 전대, 수화자로 고증하였다. 군복에서 당상과 당하의 직물차이는 문양의 유무에 있었는데 당상관은 운보문 직물을, 당하관은 문양이 없는 직물을 사용하였다. 그리고 당상관은 장식품의 세부 재료에서 옥과 금, 은을 사용하였다. 그 외에 무기는 시복, 환도, 등편, 비구와 깍지 등을 갖추었다. 정조대 기록에는 다양한 색의 협수가 보이므로 당상관과 당하관의 동다리와 전복 색상은 다양한 배색으로 고증하였다. 이상의 고증 결과를 반영하여 콘텐츠 제작을 위한 복식의 시각화 자료로 제시하였다. <서장대야조도> 관직자 복식의 고증 결과를 반영한 시각화의 기본 원칙에서 3D 콘텐츠 제작이나 실물 제작이 가능한 기준을 제시하였다. 시대와 신분에 따른 형태·색상·재질의 견본, 각 복식과 지물을 패용한 앞·옆·뒤 모습을 제시하고 색상은 RGB와 CMYK로 제시하였다.

인라인 스케이트시 발생한 손상 밑 예방 (Injuries and Prevention methods Associated with In-Line Skate)

  • 임홍철;전승주;노영진;황진호;박찬응;김태언
    • 대한정형외과스포츠의학회지
    • /
    • 제2권2호
    • /
    • pp.163-167
    • /
    • 2003
  • 목적: 본 연구는 인 라인 스케이트를 타다가 발생한 다양한 형태의 손상에 대해 기 술하고 그 원인과 예 방 방법을 찾고자 하였다. 대상 및 방법: 인 라인 스케이트를 타던 중 수상 후 본원 및 인근 병원에 내원하여 치료를 받은 환자 57예를 조사하였다 이 중 남자 37명 , 여 자20명이었으며 평균 연령 은 9세 9개월 (범위 , 6$\~$40세)이었다 수상 부위 및 인 라인 스케이트를 즐겨 타던 장소, 수상 당시 보호 장비의 착용 여부, 그리고 수상 기전 등을 조사하였다. 결과: 수상 형 태로는 골절 50예 슬관절 연골판 파열 1예 , 슬관절 내측 측부 인대 손상 2예 , 좌상 및 염 좌 4예였으며 골절의 부위로는 원위부 요-척골 골절 33예(66$\%$) , 주관절부 골절 5예(10$\%$) , 상완골 간부 골절 3예(6$\%$) 등으로 나타났다. 수상 당시의 장소는 복잡한 아파트 단지 22예 (39$\%$) , 좁은 골목길 19예 (33$\%$) , 공원 16예 (28$\%$)였다 보호장비 착용 여부로는 단 5예에서만 부분적으로 보호장비를 착용하였으며 슬관절 보호대만을 착용한 경우 2예, 슬관절 및 주관절 보호대 1예, 슬관절 , 주관절 및 완관절 보호대 2예였고, 헬멧을 착용한 경우는 없었다 결론: 인 라인 스케이트를 타다가 발생하는 손상을 줄이 기 위해서 는 적절한 보호장비의 착용 및 안전한 장소의 선택이 필요하며 , 인 라인 스케이트를 타는 방법에 대 하여 동호회 등을 통한 지속적 이고 효과적 인 교육이 중요하다고 사료되었다

  • PDF