• Journal of Fashion Business
• /
• v.27 no.5
• /
• pp.1-12
• /
• 2023

The purpose of this study was to investigate impact of wearing low-level current wrist guards on pain scale, range of motion (ROM), and muscle strength in elderly women with Carpal Tunnel Syndrome (CTS). Subjects were 12 elderly women aged between 65 and 85 years who were diagnosed with CTS symptoms. Measurements included grip strength and wrist ROM. Wrist ROM was assessed through flexion and dorsiflexion. Wrist guards were worn. After two weeks, pain level was assessed using the Visual Analogue Scale (VAS). Results showed a significant reduction in VAS score in the MES group after stimulation, whereas there was no difference in the control group. However, there was no significant difference in ROM between the MES group and the control group. Grip strength increased in the MES group after two weeks (p ≤ 0.001). In conclusion, clinical trials suggest that MES wrist guards might be provided as an adjunctive treatment method for CTS patients. This study provides foundational data for the design and use of auxiliary devices such as gloves in the field of MES research for pain reduction, ROM improvement, and muscle strength enhancement resulting from CTS.

• Journal of Mechanical Science and Technology
• /
• v.15 no.7
• /
• pp.1072-1076
• /
• 2001

A biomechanical study was conducted in this study to investigate if in-line skating wrist guards can effectively reduce the impact forces so as to protect the wrist from fracture. The forearm specimens with and without wrist guards were dropped using a specially designed sled to simulate the impact on the wrist while falling. A force plate was used to measure the total impact force on the dropping weight whereas a load cell was attached to the proximal end of the specimen and used to quantify the impact transmitted through the wrist joint. From the non-destructive tests, mean peak force measured from a force plate showed no difference between the guarded and unguarded groups whereas mean impulse of the guarded group was significantly greater than that of the unguarded group (p<0.01). Comparing the peak force and impulse measured from the load cell, the peak force of the guarded group was significantly less than that of the unguarded group (p<0.001), while the impulse values were similar. When the specimens were dropped from a higher position (2.5ft ve. 1ft), all unguarded specimens had severe wrist fractures whereas fracture was found in three out of 5 guarded specimens. Comparison of mean peak forces and impulses showed as significant difference between the guarded and unguarded groups only in the mean impulse measured from the force plate. These results suggest that the wrist guard may protect the wrist by attenuating the peak force transmitted to radius and ulnar although it may not be effective when the wrist is subjected to an impact sufficiently large to cause fractures.

• Advances in biomechanics and applications
• /
• v.1 no.3
• /
• pp.143-158
• /
• 2014

Forearm fractures in children are very common among all pediatric fractures. However, biomechanical investigations on the pediatric forearm are rather scarce, partially due to the complex anatomy, closely situated, interrelated structures, highly dynamic movement patterns, and lack of appropriate tools. The purpose of this study is to develop a computational tool for child forearm investigation and characterize the mechanical responses of a backward fall using the computational model. A three-dimensional 10-year-old child forearm finite element (FE) model, which includes the ulna, radius, carpal bones, metacarpals, phalanges, cartilages and ligaments, was developed. The high-quality hexahedral FE meshes were created using a multi-block approach to ensure computational accuracy. The material properties of the FE model were obtained by scaling reported adult experimental data. The design of computational experiments was performed to investigate material sensitivity and the effects of relevant parameters in backward fall. Numerical results provided a spectrum of child forearm responses with various effective masses and forearm angles. In addition, a conceptual L-shape wrist guard design was simulated and found to be able to reduce child distal radius fracture.

• Investigative Magnetic Resonance Imaging
• /
• v.22 no.2
• /
• pp.135-139
• /
• 2018

Most capitate fractures occur in association with additional carpal injuries, particularly scaphoid fractures. Isolated fractures of the capitate account for only 0.3% of carpal injuries, and stress fractures are one form of this fracture. We report the case of a 20-year-old male who had a stress fracture of the capitate after serving as an honor guard in the military. Conventional radiographs and computed tomography of the right wrist revealed a minimally displaced fracture line located at the midcarpal aspect of the right capitate. A magnetic resonance imaging scan demonstrates a subarticular capitate fracture with diffuse bone marrow edema, small osteophytes, and irregularity of the midcarpal articular cartilage. We also review the carpal kinematics which possibly caused the stress fracture. Although stress fractures of the capitate are rare, they should also be accounted for with patients who perform repetitive motions of the wrist to a considerable extent.

• Journal of the Korean Society of Safety
• /
• v.16 no.2
• /
• pp.80-84
• /
• 2001

Work stress and health are very important factors related to workers' condition and work safety, Author has conducted a couple of tests to check up three people's pulses before they work during their work for three types of safety guard in construction site. Work type, age, weight, sex experience year, ambient temperature n recorded as variables in this study. These are checked and asked by the author directly, before their pulse check Also, workers' Pulses were measured at height H-0 and H-9.0m to understand psychological the degree of psychological nervousness degree. POLAR protrainer NVTM HRM system(wrist recorder and sensor) was used for the site test. There are three(3) different types of construction safety guard which have been used for, this study. They are usually or frequently used and found in the site. Four different ranges of age groups(20's, 30's 40's, 50's) carpenters are assisted to the test sites with wearing pulse recorder and sensor respectively. All three types of safety guards have the same height 90㎝ even though they are different types. On top of five(5) stories tublar framed scaffolding is fabricated, similar to the one in site, where those safety guards are installed. The older(=more experienced) the workers are the more stable they are. it is shown. Also, It is verified the visually uncomfortable rail type can cause workers to psychologically be unstable.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.2
• /
• pp.78-97
• /
• 2021

Seojangdaeyajodo is a drawing of military night training on February 12th (lunar leap month), 1795. Focusing on the Seojangdaeyajodo, the characteristics and of the costumes worn by various types of officials were examined. There were 34 officials located near King Jeongjo in and around Seojangdae, with 27 Dangsanggwan and 7 Danghagwan. They wore three types of costumes, including armor, yungbok, and military uniforms. All of the twelve armor wearers and the five officials wearing yungbok were dangsanggwan, and the military uniform wearers included eleven dangsanggwan and six danghagwan. For the shape of the armor, the armor relics of General Yeoban, suitable for riding horses, and the armor painting of Muyedobotongji were referenced, and the composition of the armor was based on practicality. The armor consists of a helmet, a suit of armor, a neck guard, armpit guards, arm guards, and a crotch guard. The color of the armor was red and green, which are the most frequently used colors in Seojangdaeyajodo. The composition of yungbok was jurip, navy cheollik, red gwangdahoe, socks made of leather, and suhwaja. The composition of the military uniform was a lined jeolrip, dongdari, jeonbok, yodae, jeondae, and suhwaja. There were differences in the fabrics used in dangsanggwan and danghagwan military uniforms. Dangsanggwan used fabric with depictions of clouds and jewels, and danghagwan used unpatterned fabric. Moreover, jade, gold, and silver were used for detailed ornamental materials in dangsanggwan. The weapons included bows and a bow case, a sword, a rattan stick, wrist straps, and a ggakji. In the records of the King Jeongjo period, various colored heopsu were mentioned; the colors of the dongdari and jeonbok of dangsanggwan and danghagwan were referenced in various colors. It was presented as an illustration of costumes that could be used to produce objects accurately reflecting the above historical results. The basic principle of the illustration was to present the modeling standards for 3D content production. Samples of form, color, and material of the corresponding times and statuses were presented. The front, the side, and the back of each costume and its accessories were presented, and the colors were presented in RGB and CMYK.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.2 no.2
• /
• pp.163-167
• /
• 2003

Purpose: The purpose of this study is to describe causes and injury mechanisms during inline skating and to find preventive measures .Materials and Methods: We have carefully selected 57 patients who have been treated in our hospital and nearby hospital. There are 37 males and 20 females, and mean age is 9 years 9 months (range,6-40 years old) . We have meticulously investigated their injured sites, their favorite location for inline skating , their use of protective means while they were on the wheels and their injury mechanisms . Results: Injury consisted of 50 fractures,1 meniscal tear,2 medial collateral ligament rupture and 4 contusion or sprain. Fracture sites varied as follows : 33(66$\%$) cases in distal radius and ulna,5(10$\%$) in elbow. 3(6$\%$) in diaphysis of humerus, etc Location at the time of injury varied as follows : 22 cases(39$\%$) in their apartment complex, 19 cases in (33$\%$) narrow streets, and 16 cases(28$\%$) in parks Only five patients admitted that any means of protection were used.2 cases only had knee pad on , 1 case put on elbow pad in addition, and 2 cases put on wrist guard as well. However none of the patients had helmet on Conclusion: We would strongly like to stress the importance of using sufficient protections and of choosing area where it is safe to ride, in order to reduce the risk of accidents. In addition, continuous and effective prior education from inline skate circles may be in order before riding the inline skate.