• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.2
• /
• pp.335-345
• /
• 2021

The purpose of this study was to examine the effect of fabric movement on wrinkle recovery in a clothing care system and to propose an algorithm to improve wrinkle removal performance by adjusting fabric movements. With an increase in the reciprocating speed of the movement system, the number and amplitude of curves on the fabric also increased. This allowed the fabric to be applied to a larger tension, resulting in better wrinkle removal performance at higher speeds. However, even at high reciprocating speeds, wrinkles could not be removed effectively because of nodes at a few specific locations. Based on the results of fabric movement and wrinkle recovery, a complex movement algorithm was proposed with a mixture of various reciprocation speeds. It showed a 41%p (24%→65%) improvement of wrinkle recovery when compared with the conventional algorithm that showed simple fabric movement at 180 rpm. This was because the positions of nodes and antinodes changed continuously and the force by the reciprocating motion could be applied evenly to the fabric.

• International Journal of Precision Engineering and Manufacturing-Green Technology
• /
• v.5 no.5
• /
• pp.651-658
• /
• 2018

We comprehensively investigated the wrinkles of a stiff layer covering a spherical void embedded in a rubber matrix after the void experienced inflation or contraction. We developed an easy experimental way to realize the inflation and contraction of the voids. The inflation took place in a void right beneath the surface of the matrix and the contraction happened in a void at the bottom of the rubber matrix. In the inflation, the wrinkle at the center of the deformation was random, and the pattern propagated into rabyrinthine, herringbone, and then oriented parallel lines as the position was away from the center of the inflation to the edge. The cracks were concentric, which were perpendicular to the parallel wrinkled pattern. In the contraction, the wrinkle was simply concentric around the surface of the void without any crack. The cracks were found only near the center of the deformation. The strain distribution in the stiff layer after the inflation and contraction was theoretically analyzed with simulations that were in excellent agreement with the experimental results.

• Journal of the Korea Computer Graphics Society
• /
• v.25 no.1
• /
• pp.1-11
• /
• 2019

More force must be applied when dragging a wet compared with a dry cloth lying on the table. Increased force is needed because the fluid between the cloth and the surface of the table produces an adhesion force. In this paper, we study the adhesion force between a wet cloth and the surface of an object. To compute the adhesion force, we used the adhesion force model used in textile research based on real-world experiments and also considered the effect of wrinkles, which, to our knowledge, has not been investigated in previous work. Furthermore, we studied the phenomenon in which a wet cloth adheres to the surface of an object and that in which a wet cloth adheres to itself when undergoing self-collision.

• Journal of Convergence for Information Technology
• /
• v.9 no.6
• /
• pp.211-217
• /
• 2019

In this study, the change of skin condition was analyzed by skin analysis equipment using scrub cosmetics, and the morphological characteristics of microbead were observed by dermascope and scanning electron microscope. In the dermascope observation, during the process of cleansing, the microbeads attached to the skin existed in close contact with each other or dispersed. The skin after scrubbing was clean and smooth and the fine wrinkles between epidermal keratinocytes were reduced. In the scanning electron microscopic observation, the microbead surface did not have severe bending or rough surface. The skin moisture and oil content were higher than the scrub skin before the scrub, and there was no significant difference in the pH.

• Archives of Plastic Surgery
• /
• v.46 no.2
• /
• pp.147-151
• /
• 2019

Background Successful aesthetic plastic surgery is devoid of both unsightly scarring and postoperative disfigurement. Patients undergoing midface-lifting surgery are very often disconcerted by an altered side hairline, including sideburns, despite considerable amelioration of facial wrinkles. This study was conducted to identify an effective means of approaching an altered hairline and the unavoidable scarring arising from midface-lifting surgery. Methods A total of 37 patients who underwent corrective surgery with hair transplantation for hair loss or scar deformity arising from midface-lifting surgery from June 2014 to June 2017, and were observed for more than 6 months thereafter, were enrolled in the study. Prior to corrective surgery, the patients were administered a multiple-choice survey regarding their dissatisfaction arising from midface-lifting surgery. Among the 37 patients, 24, 12, and one underwent donor harvesting by the strip method, non-shaven follicular unit extraction, and partial shaving follicular unit extraction, respectively. Additionally, 33 of the 37 patients underwent hair transplantation in the frontotemporal recess area along with hairline correction surgery. The average number of transplanted grafts was 1,025. Results Surgery resulted in a natural and satisfactory appearance in all patients. The average patient and physician subjective satisfaction scores were 4.6 and 4.8, respectively. No adverse events such as folliculitis occurred. Conclusions Side-hairline correction surgery by hair transplantation can be considered an effective method of realigning an altered hairline accompanied by scars following midface-lifting surgery.

• Design & Manufacturing
• /
• v.15 no.3
• /
• pp.13-18
• /
• 2021

In plate forming technology, cylindrical drawing process is widely used in industry due to technological development. In this study, we used stainless steel 3042B and stainless steel 304J1, which are the most commonly used materials in the production of cold and hot water tanks for water purifiers, among cylindrical drawing products. Under the same conditions, the thickness of the sidewall of the product formed by drawn experiment was studied. As a result of the experiment, the bottom thickness of stainless steel 304J1 was considered to be thick. It is judged that the defect rate can be reduced by changing the breaking phenomenon of the floor surface of the cold and hot water bottles to the material of stainless steel 304j1. Stainless steel 304 2B material shows a sharp change in thickness from punch corner R to sidewall position, while stainless steel 304J1 material showed a uniform change from punch corner R to sidewall position. Stainless steel 304J1 material is considered to improve the clamping of the product in the process of extracting the product after hand drawing. The appearance of stainless steel 3042B products is considered to produce more wrinkles in the flange, which exerts greater tensile force on the sidewall during molding, resulting in uneven sidewall thickness.

• Food Science and Industry
• /
• v.53 no.4
• /
• pp.382-389
• /
• 2020

"Eating cosmetic" market comes to prominence worldwide. Inner Beauty has established itself as the top trend nowadays and is leading the health functional food market. Another noticeable trend other than beauty-from-within is that products using "plant-based" natural botanical raw material are increasing. Based on these trends above, we have developed a plant extract named Agatri® for skin health using Agastache rugosa. By ingesting Agatri®, it is expected that the formation of skin wrinkles is suppressed, and skin elasticity is increased by suppressing the decrease in collagen content caused by ultraviolet rays. At the same time, it is possible to prevent skin aging by improving skin hydration and trans-epidermal water loss (TEWL). The studies show that it significantly increased production of hyaluronic acid and collagen, and decreased production of matrix metalloproteinases (MMPs). And Agatri® has been approved as an "Individually recognized functional ingredient for skin health by the Ministry of Food and Drug Safety, Korea in 2020. As a result, Agatri® is a good solution for those who are in need of skin protection from exposure to UV and aging.

• Journal of Fashion Business
• /
• v.24 no.6
• /
• pp.120-134
• /
• 2020

Recently, the beauty industry has implemented personalized services based on skin big data. To increase competitiveness in the beauty industry, systematic data measurement and evaluation indicators are necessary to select data and obtain necessary knowledge. In response, this study sought to stably enhance the accuracy of skin diagnosis based on satisfaction and reliability. To this end, the research was conducted through focus group interviews (FGI), a case study of brands, and analysis of prior research results. In particular, as a result of analyzing keywords that classify skin types by brand, common survey items for skin types were oiliness and using moisturizer, cosmetic use and vascular of skin, external stimulus and blemish & freckles, facial wrinkle, outside activities, self-consciousness, and smoke. In additioin to the common questions of the preceding study and the brand survey items, the questions concerning complex skin types, seasonal change, facial color, wrinkles and elasticity were added, and the questions were presented in a total of 40 items. In particular, it suggested that skin measurement could be conducted by focusing on elasticity and pigmentation items by reflecting the results of prior research and the opinions of FGI, and based on this, a customized service with high satisfaction and high accuracy of beauty care based on this could be proposed. We hope that this study will facilitate active self-care by providing more satisfying skin stones and personalized cosmetics proposals, thus laying the foundation for the further development of the cosmetics industry.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.3
• /
• pp.477-494
• /
• 2021

This study examined four subjects with close to average body-size values in four stages based on the average BMI value of middle-aged women aged 45 to 59 years. The first experimental pants was developed with two kinds of educational materials pants pattern. After using a clothing-suitability evaluation to identify problems, a pants pattern suitable for the body shape of middle-aged women was developed by modifying and supplementing the initial design. The fit assessment revealed that pattern A had a problem with wrinkles in the hip and thigh areas due to the long crotch length, and pattern B had a short bottom length, which caused the bottom to curl in toward the groin or for the bottom to stick at the hips. The second experimental pants was developed to address these issues and overall satisfaction with the dimensions was higher than for the first educational pattern. The proper front and rear length extensions satisfied movement functionality and appearance requirements, and increasing the gradient of the back centerline-rather than expanding the width of the back crotch-improved the functionality.

• Medical Lasers
• /
• v.9 no.2
• /
• pp.110-118
• /
• 2020

The non-ablative fractional dual laser is equipped with two types of lasers, 1550 nm and 1927 nm in one device, and was approved by the United States Food and Drug Administration in 2013. The advantages of the non-ablative fractional laser (NAFL) include fewer side effects such as erythema, edema, post-laser pigmentation, and scab formation. Thus, the NAFL is preferred by both practitioners and consumers because it is convenient and safe for use. The 1550 nm erbium glass and 1927 nm thulium lasers are representative NAFLs that have been developed separately and are often used as a single-wavelength laser with proven clinical efficacy in various indications. The 1550 nm wavelength laser penetrates the dermis layer and the 1927 nm wavelength laser is effective for epidermal lesions. Therefore, targeting the skin layer can be easily achieved with both the 1550 and 1927 nm lasers, respectively, or in combination. Clinically, the 1550 nm laser is effective in the treatment of mild to moderate sagging and wrinkles, scars, and resurfacing. The 1927 nm laser improves skin texture and treats skin pigmentation and wounds. It can also be used for drug delivery. The selection and utilization rate of NAFL has been increasing in recent times, due to changes in lifestyle patterns and the need for beauty treatments with fewer side effects and short downtime. In this study, we present a plan for safe and effective laser therapy through a review of literature. Clinical applications of the multifunctional NAFL are also described.