• 설비공학논문집
• /
• 제13권1호
• /
• pp.18-24
• /
• 2001

Woven wire wick is very effective structure because of its easiness to insert inside of pipe for a miniature heat pipe. The present study was conducted to investigate the effect of the effective flow passage with respect to wire helix angle. Also effective thermal conductivity were examined by defining mean porosity considering effective liquid flow passages. Effective heat transfer area is varied with respect to wire helix angle, and in the range of $\thet=60~65^{\circ}C$, heat transfer area is decreased about 15~20%. Permeability of woven wire wick shows similar value of 200 mesh screen wick. And comparison of experimental results on effective thermal conductivity shows a fairly good agreement with the analytical results.

• 대한기계학회논문집A
• /
• 제34권11호
• /
• pp.1659-1666
• /
• 2010

WBD(wire-woven bulk diamond)라고 명명한 와이어로 직조된 다공질 금속의 새로운 형태를 소개한다. WBD 는 기계적 열 특성과 공학적 응용면에서 몇 년 전에 소개되어진 WBK(wire-woven bulk Kaogme)와 같이 나선형 와이어로 구성된다. WBK 에서는 각 교차점에서 3 개의 와이어가 접하나 WBD 에서는 4 개의 와이어가 서로 접하여 배열된다. 압축하중 하에서 WBD 의 기계적 거동을 조사하고 그 결과를 WBK 와 비교하였다. 같은 세장비(d/c)에서 WBD 의 밀도 및 강도는 WBK 의 약 2 배이나, WBD 의 강성도는 WBK 보다 그만큼 높지 않다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제10권2호
• /
• pp.72-78
• /
• 2002

Woven wire wick is a very effective structure because of its easiness to insert inside of pipe for a miniature heat pipe. The present study was conducted to predict the porosity and the effective thermal conductivity of liquid-saturated woven wire wick. The porosity and the effective thermal conductivity of the evaporator region indicate different values from those of the condenser region due to the existence of non-flow region. The minimum value of the effective thermal conductivity indicates on condition of the $\theta$=$45^{Wcirc}$ and the values of the effective thermal conductivity increases symmetrically centering around the minimum value. The values of the effective thermal conductivity in the evaporator region at the angle of $45^{Wcirc}$ indicate about 60~80% higher than those in the condenser region for various combinations of copper, and stainless with water and ethanol.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.13-19
• /
• 2008

A Wire-woven Bulk Kagome (WBK) is the new truss type cellular metal fabricated by assembling the helical wires in six directions. The WBK seems to be promising with respect to morphology, fabrication cost, and raw materials. In this paper, first, the geometric and material properties are defined as the main design parameters of the WBK considering the fact that the failure of WBK is caused by buckling of truss elements. Taguchi approach was used as statistical design of experiment(DOE) technique for optimizing the design parameters in terms of maximizing the compressive strength. Normalized specific strength is constant regardless of slenderness ratio even if material properties changed, while it increases gradually as the strainhardening coefficient decreases. Compressive strength of WBK dominantly depends on the slenderness ratio rather than one of the wire diameter, the strut length. Specifically the failure of WBK under compression by elastic buckling of struts mainly depended on the slenderness ratio and elastic modulus. However the failure of WBK by plastic failed marginally depended on the slenderness ratio, yield stress, hardening and filler metal area.

• 대한기계학회논문집A
• /
• 제32권1호
• /
• pp.70-76
• /
• 2008

Periodic cellular metals (PCMs) are actively being investigated because of their excellent specific strength and stiffness, and multi-functionality such as a heat disperse structure bearing external loading. The Kagome truss PCM has been proved that it has higher resistance to plastic buckling and lower anisotropy than other truss PCMs. In this paper, the out-of-plane compressive responses of the WBK specimens have been measured, theoretically predicted and numerically analyzed. Three specimens of two-layered WBK are fabricated and tested for measuring the responses. The peak stress of compressive behavior and effective elastic modulus are predicted based on the equilibrium equation and elastic energy conservation. Moreover, the structure of the specimen is modeled using the commercial mesh generation code, PATRAN and the finite element analysis for the model under the compression is carried out using the commercial FE code, ABAQUS. Finally, the obtained results are compared with each other to analyze the compressive characteristics of Wire-woven Bulk Kagome (WBK).

• 대한기계학회논문집A
• /
• 제40권9호
• /
• pp.827-833
• /
• 2016

와이어 직조 Kagome는 와이어로 직조된 Periodic Cellular Metal의 일종으로서 Kagome 구조로 이루어져 있다. 와이어 직조 Kagome는 무게 대비 높은 강도와 강성을 가지면서 대량 생산에도 큰 가능성을 가지는 것으로 알려졌다. 본 연구에서는 ${\alpha}$-cristobalite 구조적 특성을 모사하여 음의 푸아송비를 갖는 새로운 직조 구조체를 개발하였다. 와이어 직조 Kagome를 제작한 후 사면체 단위셀 부분을 강구와Epoxy를 이용하여 채우고, 초기 변형을 주어 시편을 제작하였다. 또한 FEA 시뮬레이션을 통해 제작 가능성을 확인하고, 실제 제작한 구조체를 대상으로 기계적 특성을 연구하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.53-53
• /
• 2004

최근 자동차/항공기 등의 판재나 구조물을 첨단기능성 재료로 제작하여 연료소비량을 감소시키는 동시에 승객의 안정성을 현저히 향상시키는 초경량/고강도/고강성/고내충격성 재료에 대한 연구가 활발히 수행되고 있다. 국내에서는 두개의 금속 박판사이에 3차원 금속 구조체를 대면적에 분포시킨 후, 판재와 구조체를 접합하여 재료의 무게를 현저히 감소시키는 반면 강도/강성/내충격성을 향상시키는 ISB(Internally Structured Bonded)판재 개발에 대한 연구가 시작되고 있다.(중략)

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1690-1695
• /
• 2007

Lightweight metallic truss structures with open, periodic cell are currently being investigated because of their multi-functionality such as thermal management and load bearing. The Kagome truss PCM has been proved that it has higher resistance to plastic buckling, more plastic deformation energy and lower anisotropy than other truss PCMs. The subject of this paper is an examination of the failure mechanism of Wire woven Bulk Kagome(WBK). To address this issue, the out-of-plane compressive responses of the WBK has been measured and compared with theoretical and finite element (FE) predictions. For the experiment, 2 multi-layered WBK are fabricated and 3 specimens are prepared. For the theoretical analysis, the brazed joints of each wire in WBK are modeled as the pin-joint. Then, the peak stress of compressive behavior and elastic modulus are calculated based on the equilibrium equation and energy method. The mechanical structure with five by five cells on the plane are constructed is modeled using the commercial code, PATRAN 2005. and the analysis is achieved by the commercial FE code ABAQUS version 6.5 under the incremental theory of plasticity.

• 대한기계학회논문집A
• /
• 제35권9호
• /
• pp.1099-1103
• /
• 2011

기존의 WBK(와이어 직조 카고메)의 기계적 강도와 강성은 WBK 를 구성하는 요소가 반듯하다는 가정 아래에서 계산되었다. 실제 WBK 의 요소는 3 차원 나선형상을 이루고 있어 계산된 이론 해와 실험 결과값과 차이를 보인다. 이번 연구에서는 정확한 WBK 의 기계적 강도와 강성을 위해 하나의 트러스 요소의 굴곡 효과와 브레이징 접합 부를 고려하여 계산하였다. 또한 예측한 이론 해의 검증을 위한 경계주기조건(PBC) 유한요소해석을 수행하여 실험 결과값과 비교 분석하였다.

• 터널과지하공간
• /
• 제6권3호
• /
• pp.260-266
• /
• 1996

Safety concern is one of the most important parameters in the design of explosive building demolition. Laboratory experiments were performed to investigate the failure behaviour of concrete columns and the effects of protection materials. Fourteen reinforced columns with two sizes were constructed and the effects of protection materials were tested for two kinds of materials: non woven fabrics and wire net. The results showed that control of gas effects is a key to the control of flying chips. It was recommended to use both wire net and non woven fabrics as primary and secondary protection materials. Such protection method was successfully applied to the explosive demolition of 16 and 17-strory apartment buildings.and the results of a simulation on a model tunneling workings using diesel equipments are introduced. In case of typical model of tunneling face, the gas concentration of human height is about one third of roof concentration and right side half of the tunnel shows better environment than left half. NOx concentration of workings can be estimated about 0.45ppm which is much lower than permissible level(5 ppm).