• Journal of Chest Surgery
• /
• 제27권9호
• /
• pp.732-737
• /
• 1994

From January 1983 to December 1992, There were 1441 papers in the Korean Journal of Thoracic and Cardiovascular Surgery. Among these papers, 783[54.3%] were original article or clinical analysis and 652[45.2%] were case reports. A total of 319 papers contained some statistical analysis. In 150 cases[47.0%] of these 319 papers, the statistical description was insufficient. Of the correctly described papers, 115[68%] had more than one statistical error. Of course, in many cases the errors were not considered to be severe, but they were often sufficient to raise doubts about some inferences. We suggest that authors should be more careful when they describe and apply statistical methods. If possible, authors should interpret results with statistical specialists. And we also suggest that our society have more extensive statistical refereeing system. This would at least prevent the worst errors from appearing in print. The last suggestion is elementary instruction in statistical methods during preclinical training.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권1호
• /
• pp.44-53
• /
• 2014

A lightning strike to the aircraft seriously affects the aircraft and its components in various ways. As one of the most critical threats to the flight safety of an aircraft, fuel vapour ignition by lightning can occur through various means, notably through hot spot formation on the fuel tank skins. In this study, a coupled thermal-electrical approach using the commercial software ABAQUS is used to study the effects of a lightning strike on aircraft fuel tanks. This approach assumes that the electrical conductivity of a material depends on temperature, and that a temperature rise in a material due to Joule heat generation depends on electrical current. The inter-dependence of thermal and electrical properties-the thermal-electrical coupling-is analyzed by a coupled thermal-electrical analysis module. The analysis elucidates the effects of different material properties and thicknesses of tank skins and identifies the worst case of lightning zones.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.2154-2161
• /
• 2014

Growth analysis and selection of sea cucumbers (Stichopus japonicas) is typically performed through length or weight measurements. However, because sea cucumbers continuously change shape depending on the external environment, weight measurement has been the preferred approach. Weight measurements require extensive time and labor, moreover it is often difficult to accurately weigh sea cucumbers because of their wet surface. The present study measured sea cucumber features, including the body length, width, and thickness, by using a vision system and regression analysis to generate $R^2$ values that were used to develop a weight estimation algorithm. The $R^2$ value between the actual volume and weight of the sea cucumbers was 0.999, which was relatively high. Evaluation of the performance of this algorithm using cross-validation showed that the root mean square error and worst-case prediction error were 1.434 g and ${\pm}5.879g$, respectively. In addition, the present study confirmed that the proposed weight estimation algorithm and single slide rail device for weight measurement can measure weights at approximately 4,500 sea cucumbers per hour.

• Journal of Positioning, Navigation, and Timing
• /
• 제3권2호
• /
• pp.45-51
• /
• 2014

GNSS has the disadvantage of being vulnerable to jamming, and thus, the necessity of jamming countermeasure techniques has gradually increased. Jamming countermeasure techniques can be divided into an anti-jamming technique and a jammer localization technique. Depending on the type of a jammer, applicable techniques and performance vary significantly. Using an appropriate jamming countermeasure technique, the effect of jamming on a GNSS receiver can be attenuated, and prompt action is enabled when estimating the location of a jammer. However, if an inappropriate jamming countermeasure technique is used, a GNSS receiver may not operate in the worst case. Therefore, jammer identification is a technique that is essential for proper action. In this study, a technique that identifies a jammer based on template matching was proposed. For template matching, analysis of a received jamming signal is required; and the signal analysis was performed using a spectral correlation function. Based on a simulation, it was shown that the proposed identification of jamming signals was possible at various JNR.

• 항공우주기술
• /
• 제6권2호
• /
• pp.104-110
• /
• 2007

GOES 계열 정지궤도 위성 기상 영상기의 적외선 채널에 사용되는 분광 응답 성능 규격을 분석하였다. 성능 규격 범위 내에서 분광 응답 함수 모양 변화에 따른 유효 중심 파장(Effective Wavelength)과 유효 입력광 Radiance (Effective Input Radiance)의 변동 특성을 분석함으로써 분광 응답 규격 해석 방법을 제시하였다. 구체적 분석 방법으로서 먼저 분광 응답 규격 범위 내에서 중앙 대칭 분광 응답 함수와 함께 최악 경우에 해당하는 4 가지 대표적인 분광 응답 함수들을 선택하고, 각 분광 응답 함수에 대해 적외선 채널의 유효 중심 파장과 유효 입력광 Radiance를 구하였다. 결론으로서 성능 규격의 범위 내에서 허용되는 유효 중심 파장과 유효 입력광 Radiance의 최대 변동 범위를 제시하였다.

• 한국화재소방학회논문지
• /
• 제22권5호
• /
• pp.1-8
• /
• 2008

본 연구의 목적은 지하철 터널에서 화재가 발생한 경우 역사와 환기실의 위치에 따른 화재특성을 수치적으로 분석하는데 있다. 이를 위해 피난거리, 피난시간 및 최악조건 화재가 발생한 2가지 시나리오를 선정하고, 환기실 위치 변경에 따른 시간별 화재상황에 대한 터널내의 시류 및 열환경을 분석하였다. 화재해석을 위해 FLUENT v.6.3.26을 이용하였으며, 난류모델은 표준 k-${\varepsilon}$ 모델을 사용하였다. 경우에 따른 터널 내 일산화탄소의 농도 분포, 온도분포 및 속도분포의 결과를 분석하였고 본 연구의 결과는 지하철 역사 및 터널 설계시 최적의 방재 및 환기시스템을 구축하는데 기여할 것으로 생각된다.

• 생약학회지
• /
• 제24권1호
• /
• pp.38-46
• /
• 1993

Two kinds of gangliosides contained in deer horns were determined by integrating the peaks of TLC densitometry. Japanese deer horn originated from China showed the highest gangliosides among tested samples and the upper parts in deer horns showed higher gangliosides than the lower parts. In the case of graded samples, the best grade A showed the highest content and the worst grade E did the lowest content. Sixteen kinds of free amino acids were analyzed by auto amino acid analyzer. The lower region the deer horn was, the more the total content of free amino acids was and several kinds of amino acids were contained quite regularly.

• Journal of Astronomy and Space Sciences
• /
• 제34권4호
• /
• pp.281-288
• /
• 2017

The first Korea lunar orbiter, Korea Pathfinder Lunar Orbiter (KPLO), has been in development since 2016. After launch, the KPLO will execute several maneuvers to enter into the lunar mission orbit, and will then perform lunar science missions for one year. Among these maneuvers, the lunar orbit insertion (LOI) is the most critical maneuver because the KPLO will experience an extreme velocity change in the presence of the Moon's gravitational pull. However, the lunar orbiter may have a delayed LOI burn during operation due to hardware limitations and telemetry delays. This delayed burn could occur in different captured lunar orbits; in the worst case, the KPLO could fly away from the Moon. Therefore, in this study, the burn delay for the first LOI maneuver is analyzed to successfully enter the desired lunar orbit. Numerical simulations are performed to evaluate the difference between the desired and delayed lunar orbits due to a burn delay in the LOI maneuver. Based on this analysis, critical factors in the LOI maneuver, the periselene altitude and orbit period, are significantly changed and an additional delta-V in the second LOI maneuver is required as the delay burn interval increases to 10 min from the planned maneuver epoch.

• Nuclear Engineering and Technology
• /
• 제50권3호
• /
• pp.453-461
• /
• 2018

Shaft stations of underground uranium mines in China are not only utilized as waiting space for loaded mine-cars queuing to be hoisted but also as the principal channel for fresh air taken to working places. Therefore, assessment of how mine-car queuing processes affect shaft station radon concentration was carried out. Queuing network of mine-cars has been analyzed in an underground uranium mine, located in Quzhou, Zhejiang province of Eastern China. On the basis of mathematical analysis of the queue network, a MATLAB-based quasi-random number generating program utilizing Monte-Carlo methods was worked out. Extensive simulations were then implemented via MATALB operating on a DELL PC. Thereafter, theoretical calculations and field measurements of shaft station radon concentrations for several working conditions were performed. The queuing performance measures of interest, like average queuing length and waiting time, were found to be significantly affected by the utilization rate (positively correlated). However, even with respect to the "worst case", the shaft station radon concentration was always lower than $200Bq/m^3$. The model predictions were compared with the measuring results, and a satisfactory agreement was noted. Under current working conditions, queuing-induced variations of shaft station radon concentration of the study mine are not remarkable.

• 디지털산업정보학회논문지
• /
• 제17권1호
• /
• pp.35-44
• /
• 2021

With the development of information technology, the cybersecurity threat continues as digital-related technologies are applied to the instrumentation and control system of nuclear power plants. The malfunction of the instrumentation and control system can cause economic damage due to shutdown, and furthermore, it can lead to national disasters such as radioactive emissions, so countering cybersecurity threats is an important issue. In general, the study of cybersecurity in instrumentation and control systems is concentrated on safety systems, and diverse protection systems perform protection and reactor shutdown functions, leading to reactor shutdown or, in the worst case, non-stop situations. To accurately analyze cyber threats in the diverse protection system, its linked facilities should be analyzed together. Risk analysis should be conducted by analyzing the potential impact of inter-facility cyberattacks on related facilities and the impact of cybersecurity on each configuration module of the diverse protection system. In this paper, we analyze the linkage of the diverse protection system and discuss the cybersecurity linkage threat by analyzing the availability of equipment, the cyber threat impact of the linked equipment, and the configuration module's cybersecurity vulnerability.