• Journal of the Korean Institute of Gas
• /
• v.27 no.2
• /
• pp.32-38
• /
• 2023

In a chemical plant, while supplying corrosive fluid to a storage tank with a pump, an accident occurred where the corrosive fluid leaked through the upper exhaust vent because the level indicator was not accurately determined. There are various causes of leakage accidents, but we focused on the sticking of the level indicator of the level gauge, which is the direct cause. As a result of the analysis, the level indicator used in the workplace where the accident occurred was randomly replaced, and in the summer when the accident occurred, the tubular type level gauge was found to be more likely to stick than other types because thermal expansion easily occurs. In addition, there were difficulties in reviewing the proper installation because the installation standards for measuring instruments installed in storage tanks were not clear in Korea. Therefore, in this study, based on accident cases and overseas standards, we are going to find out about precautions when installing storage tank instrumentation.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.4
• /
• pp.337-344
• /
• 2012

Objectives: This study was conducted to assess the trend of work-related accident rate in the past 10 years (2002~2011) in Gusan district, Ministry of Employment and Labor, Korea. Methods: To analyze the change of work-related accident rate in the past 10 years in Gunsan District, we analyzed the work-related accident and disease by the type of business, business scale and analyzing the victim's age and job period using workplace information management system(PKMS) in the Ministry of Employment and Labor. Results: The average rate of work-related accidents in Gunsan district was 0.96% in the past 10 years and it was a little higher than that of national average 0.75%. The rates of work-related accidents tended to decrease from 1.11% in 2002, to 1.09% in 2006, and to 0.79% in 2011. Mortality (per 10,000) rates also tended to decrease in the years 2002, 2006, and 2011 as 3.07, 2.46, and 1.53. By the type of business, the average rate of work-related accidents in the past 10 years was the highest in agriculture as 1.77%, followed by forestry farming at 1.76%. By the business scale, the average rate of work-related accidents was the highest in the group of under 5 employees as 2.05% and it was the lowest in the group of more than 300 employees as 0.50%. The ratio of work-related accidents in the 30's age group was decreased from 41.7% in 2002 to 25.2% in 2011 and the ratio for the 50's age group was increased from 28.6% in 2002 to 49.5% in 2011. Conclusions: Although the rate of work-related accident was decreased in the past 10 years, the polarization of work-related accidents rated by the business scale and age groups show a significant difference. So it is needed that the planning and implementing of work-related accidents prevention policies.

• Journal of the Korean Dietetic Association
• /
• v.16 no.4
• /
• pp.318-331
• /
• 2010

The objectives of this study were to investigate the status of accidents and to assess hazards in institutional foodservices in the Changwon and Masan areas. A survey was conducted from February 1 to March 31, 2009 using questionnaires, and 142 dietitians participated. The dietitians' perception of accident risks in workplace averaged 3.11 points. Forty-five percent of the respondents responded that accidents had occurred more than once between 2006 and 2008. In addition, 28.2% of the respondents experienced employee absences or turnover due to accidents during Year 2008. 'Musculoskelectal injuries or disorders (65.5%)', 'slips or falls (64.8%)', 'burns (57.7%)', and 'cuts and punctures (48.6%)' were the predominant accidents in foodservice. 'Knives (76 points)', 'steam kettles (41 points)', 'vegetable cutters (34 points)' and 'turn kettles (26 points)' were the equipment with severe accidents, such as burns or cut injuries. Among foodservice processes, 'carpal tunnel syndrome while washing (2.83 points)', 'burned by frying oil (2.64 points)', 'cut by sharp tools (2.55 points)', 'musculoskelectal injury by moving heavy weight food materials (2.41 points)', and 'injury by slipping on wet workplace floors and trenches (2.19 points)' were the most frequently occurring accidents at foodservice sites. To prevent safety accidents, dietitians' perceptions of safety supervision should be improved, and therefore, it is necessary they receive safety education.

• Journal of the Korean Society of Safety
• /
• v.31 no.2
• /
• pp.112-118
• /
• 2016

The labor force has moved to services industry. An industrial accidents of service industry is three people on 10 persons in 2013. This research conducted questionnaire surveys of 1:1 directly person interviews with a structured questionnaire intended for 150 service workplaces, in order to improve occupational safety and health in very small service workplace with less than 5 employee. The survey contents is employment type, safety and health management system, safety and health training, activities. In the results, working with non-regular(informal) workers is two people on 10 persons 27.1% and female workers is about five people on 10 persons with 58.1%, and that 67.9% of non-regular workers who are mainly engaged in the production line appeared. And the work-related injury and accident experience was 3.3% and the occupational injury rate was 1.02%, especially occupational injury rate of female workers was 0.88%. Workplace risk assessment carried out in response that it was very low as 10.0% of the total. Also the safety & health education and activities was very low. Thus the safety consciousness and education is urgently required in order to prevent the industrial accidents.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.3
• /
• pp.43-53
• /
• 2008

This study is carried out for the fire safety of the factory building, the fire risk reduction measure in compliance with an example approached in fire risk reduction systematically, contribute to reduce the fire risk. The analytical fire risk process of discovering, identifying, estimating and evaluating risk and control measure as risk reduction measures are core concept, applies loss prevention with loss control techniques. The painting process in the workplace where the fire hazard and death accident accompanies coexists. Loss prevention problem of creation prevention of dangerous atmosphere at workplace is health and human services problem of normal circumstances, must be inspected with problem of combustible gases at the time of fire explosion. Static electricity measure accomplished the risk control process thoroughly as the fire risk reduction process model with the ignition sources measure which is presented. Fire risk from within organizing will be able to classify with each field by detailedly but risk treatment process will be able to apply basically all the same concept. Consequently about risk management example from before, this study is proposed risk management techniques that standardized rightly in the actual condition of organization with one plan, with discovery of fire risk, the feedback process in compliance with a fire risk reduction and the review which control the result is joint responsibility of engineer, technical expert and manager as part of safety management to practice with the fact must be supervised.

• Safety and Health at Work
• /
• v.11 no.3
• /
• pp.314-321
• /
• 2020

Background: Occupational accidents occur for a variety of reasons, such as unsafe behaviors of workers and insufficient safety equipment at the workplace, but there are also various economic and social factors that can impact working conditions and working environment. This study analyzed the relationship between changes in economic factors and the occurrence of occupational accidents in Korea. Methods: Multilinear regression analysis was used as the analysis model. The general to specific method was also used, which consecutively removes statistically insignificant variables from a general model that includes dependent variables and lagged variables of dependent variables. Results: The frequency of occupational accidents was found to have a statistically significant relationship to economic indicators. The monthly number of cases of occupational injury and disease and fatal occupational injuries were found to be closely related to manufacturing capacity utilization, differences in the production index in the services sector, and commencements of building construction. The increase in equipment investment indicators was found to reduce fatal occupational injuries. Conclusion: The results of this study may be used to develop occupational accident trends or leading indicators, which in turn can be used by organizations that manage and monitor occupational accidents toward taking administrative action designed to reduce occupational accidents. The results also imply that short-term and mid- to long-term economic and social changes that can impact workers, workplaces and working conditions, and workplace organizations must be taken into account if more effective government policies are to be established and implemented toward further prevention of occupational accidents.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.1
• /
• pp.41-48
• /
• 2008

On the basis of total page, the coverage rate of education of safety and health in textbooks of elementary school was approximately 10%. In middle school, the contents of safety education were addressed mainly in subject of chemistry below about 5% of coverage rate whereas the contents of health education appeared mainly in subject of athletics below about 15% of coverage rate. Similarly, the contents of safety education and health education in textbooks of high school were indicated mainly in the subjects of chemistry and athletics, showing below about 5% and 30% of coverage rate, respectively. In conclusion, the education level of safety and health in textbooks was generally lower compared to other contents. The coverage rate of safety education was relatively lower than health education, which implicates that extensive contents related to safety education are needed to be added to textbooks in order to establish preliminary attitude for preventing workplace accident.

• International Journal of Safety
• /
• v.9 no.2
• /
• pp.29-34
• /
• 2010

When doing maintenance works at the trackside of railway, the method which delivers information on approaching of train to maintenance workers through alarm devices such as the flag or indication light, etc., is being used by locating persons in charge of safety alarm in addition to the maintenance workers at fixed distances in the front and rear of the workplace. Workers maintaining at the trackside may collide with the train since they cannot recognize the approach of train although it approaches to the vicinity of maintenance workplace because of the sensory block phenomenon occurred due to their long hours of continued monotonous maintenance work. The clash or rear-end collision accidents between many maintenance trains called motor-cars can be occurred since there are cases where the signal systems for safe operation of motor-car such as track circuit etc. are blocked or not operated normally. We developed the new safety equipment for protection of trackside maintenance workers using radio frequency signals and bidirectional detection mechanism. The developed safety equipment must analyze the several operational mechanism for each different operation situations. In this paper the analysis results are represented.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.4
• /
• pp.416-424
• /
• 2018

Objective: The objective of this study was to estimate the numbers of employees occupationally exposed to noise according to their industry and size. Methods: A Delphi panel consisting of 15 occupational health experts estimated the exposure prevalence of noise in workplace. Data on Industrial Accident Compensation Insurance provided from Occupational Safety and Health Research Institute were combined to produce the exposure population. Results: In Korea, 16.0% of employees, 2,539,890 out of 15,838,926, was estimated to exposed to noise occupationally. The rate was 32.7% and 10.3% in manufacturing sector and non-manufacturing sector, respectively. The highest rate, 52.5%, was found in manufacturing industries of wood and of products of wood and cork(except furniture) and of other transport equipment. Sorted by their size of business, the rate was higher as the number of employee was larger in manufacturing sector. Conclusions: Compared to the same rate estimated in the US, 17.2%, the result of this study seems to be in a resonable range.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.529-535
• /
• 2022

In order to minimize occupational accidents at worksites, the government is proposing and operating various safety and health policies. The safety and health management capabilities of domestic workplaces vary greatly depending on the size of the workplace, and in particular, safety management is difficult in workplaces with fewer than 50 employees, resulting in a relatively high accident rate. Therefore, the government is operating the safety and health technical support project for small business sites to establish safety and health in small business. In this regard, this study provided a plan for substantiating the safety and health technical support project. through the condition survey of the workplace.