• Journal of Electrical Engineering and Technology
• /
• v.2 no.1
• /
• pp.112-117
• /
• 2007

a parametric investigation was conducted to evaluate the effect of the laser beam for plastic adhesion. To determine the best condition for plastic adhesion, the $CO_2$(wavelength $10.6{\mu}m$) and nd:yag(wavelength $10.6{\mu}m$) laser were experimented with. From the experiment results obtained, the nd:yag laser was revealed to be the most suitable for plastic adhesion. In this study, three adhesion parameters such as input power level, working time of laser beam and pps(pulse per second) were systematically adjusted for suitable adhesion. From these experiments, it was observed that the target plastic melted and was evaporated by the nd:yag laser. Furthermore, the relationships between adhesive surface by laser beam and above three parameters were discovered.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.356-358
• /
• 1993

With a focused laser beam, we make a microscopic change on a thin film, and organize the overall system that can observe the change with a microscope. This system utilizes the energy of a laser beam which is focused by a simple lense system. That is a laser beam which has its waist at working distance of a lense. The microscopic change induced by the energy of laser beam focused through a lense can be observed in real time. The experiment with this system shows that the 10mW He-Ne 632.8nm laser can change the black vinyl instantaneously.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7C
• /
• pp.743-754
• /
• 2006

In the proposed method, two regular laser working at two different wavelengths perform moving object detection alternatively in time. The laser intensity and the beaming period of each laser is equally maintain as to the single laser radar, hence, externally, dual beam lasers radar works exactly same as the single beam laser radar except that the proposed dual lasers radar needs additional post-processing of received signals in the receiver. To verify the robustness of the proposed method, a set of computer simulation has been performed. The communication channel is assumed to be additive white Gaussian noise, and the perfect synchronization is assumed. All other simulation parameters such as signal power and signalling period are equally maintain in both systems while the signal processing time such as spreading and filtering are expected to be trivial in call cases.

• Current Optics and Photonics
• /
• v.7 no.6
• /
• pp.708-713
• /
• 2023

A robust all-fiber nonlinear amplifying loop-mirror-based mode-locked femtosecond laser is demonstrated. Power-dependent nonlinear phase shift in a Sagnac loop enables stable and power-efficient mode-locking working as an artificial saturable absorber. The pump power is adjusted to achieve the lowest intensity noise for stable long-term operation. The minimum pump power for mode-locking is 180 mW, and the optimal pump power is 300 mW. The lowest integrated root-mean-square relative intensity noise of a free-running mode-locked laser is 0.009% [integration bandwidth: 1 Hz-10 MHz]. The long-term repetition-rate instability of a free-running mode-locked laser is 10^-7 over 1,000 s averaging time. The repetition-rate phase noise scaled at 10-GHz carrier is -122 dBc/Hz at 10 kHz Fourier frequency. The demonstrated method can be applied as a seed source in high-precision real-time mid-infrared molecular spectroscopy.

• Journal of Welding and Joining
• /
• v.28 no.3
• /
• pp.42-48
• /
• 2010

Polycarbonate (PC) and Acrylonitrile Butadiene Styrene (ABS) were welded by a combination of a diode laser and a CNC machining center. Laser beam delivered through the transparent PC and was absorbed in an opaque ABS. Polymers were melted and joined by absorbed and conducted heat. Experiments were carried out by varying working distance from 44mm to 50mm for the focus spot diameter control, laser input power from 10W to 25W, and scanning speed from 100 to 400mm/min. The weld bead and cross-section were analyzed for weld quality, and tensile results were presented through the joint force measurement. With focus distance at 48mm, laser power with 20W, and welding speed at 300mm/min, experimental results showed the best welding quality which bead size was measured to be 3.75mm. The shear strength at the given condition was $22.8N/mm^2$. Considering tensile strength of ABS is $43N/mm^2$, shear strength was sufficient to hold two materials. A single process was possible in a CNC machining system, surface processing, hole machining and welding. As a result, the process cycle time was reduced to 25%. Compared to a typical process, specimens were fabricated in a single process, with high precision.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.539-543
• /
• 2005

The research presented in this paper enables real-time 3D modeling to help make construction processes ultimately faster, more predictable and safer. Initial research efforts used an emerging sensor technology and proved its usefulness in the acquisition of range information for the detection and efficient representation of static and moving objects. Based on the time-of-flight principle, the sensor acquires range and intensity information of each image pixel within the entire sensor's field-of-view in real-time with frequencies of up to 30 Hz. However, real-time working range data processing algorithms need to be developed to rapidly process range information into meaningful 3D computer models. This research ultimately focuses on the application of safer heavy equipment operation. The paper compares (a) a previous research effort in convex hull modeling using sparse range point clouds from a single laser beam range finder, to (b) high-frame rate update Flash LADAR (Laser Detection and Ranging) scanning for complete scene modeling. The presented research will demonstrate if the FlashLADAR technology can play an important role in real-time modeling of infrastructure assets in the near future.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.6
• /
• pp.160-165
• /
• 1999

In surface grinding, the conditions of the grinding wheel give a significant effect on the ground workpieces comparing with other metal removal provesses. In this paper, to assist the development, a non-contacting optical method by the laser beam is introduced. The in-process measurement of scattering intensities has been made during surface grinding processes and the surface textures of wheel working surfaces are captured. Also, in order to determine the dressing time monitoring method of a grinding wheel, a three-dimensional computer simulation of the grinding operation has been attempted based on the contact mechanism and the surface-shaping system between the grinding wheel and the workpiece. The optimal dressing time is determined by the amount of the grain wear and work surface roughness.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.10a
• /
• pp.293-298
• /
• 1998

In surface grinding, the conditions of the grinding wheel give a significant effect on the ground workpieces comparing with other metal removal processes. In this paper, to assist the development, a non-contacting optical method is introduced to make in-process measurements of scattering intensities from laser beam during surface grinding processes. This show indications of changes in surface texture of wheel working surfaces. Also, in order to determine the dressing time monitoring method of grinding wheel in surface grinding, a three-dimensional computer simulation of the grinding operation has been attempted based on the contact mechanism and surface-shaping system between the grinding wheel and the workpiece. The optical dressing time is determined based on the amount of the grain wear and work surface roughness.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.4-4
• /
• 2009

Polycarbonate (PC) and Acrylonitrile Butadiene Styrene (ABS) was welded through a combination of a diode laser and CNC. Laser beam passed the transparent PC and was absorbed in an opaque ABS. Polymers were melted and welded by absorbed and conducted heat. Experiments were carried out by varying working distance from 44mm to 50mm for the focus spot diameter control, laser input power from 10W to 25W, and scanning speed from 100 to 400mm/min. The weld bead size and the specimen cross-section were analyzed, and tensile results were presented through the joint force measurement. With focus distance at 48mm, laser power with 20W, and welding speed at 300mm/min, experimental results showed the best welding quality which bead size was 3.75mm and the shear strength was $22.8N/mm^2$. Considering tensile strength of ABS is $43N/mm^2$, shear strength was sufficient to hold two materials. A single process was possible in CNC machining processes, surface processing, hole machining and welding. As a result, the process cycle time was reduced to 25%. Compared to a typical process, specimens were fabricated in a single process, with high precision. By combining two operations processes developed process gained 50% more efficiency.