• Journal of Environmental Health Sciences
• /
• v.46 no.5
• /
• pp.539-547
• /
• 2020

Objectives: This study was performed to emphasize improvement of the perception of dental hygienists' environmental working conditions by analyzing various factors. Methods: Two hundred ninety-eight female dental hygienists working at 35 medical institutions in Daegu City and Gyeongsangbuk-do Province participated. A self-recording type survey was done in October 2016. Results: Factors influencing the perception of infection control was length of career. Dental hygienists with more experience have a higher level of perception. Factors influencing the perception of working posture was the number of patients per day and career level. Dental hygienists seeing 50 or fewer patients per day and senior staff showed higher levels of this perception. Factors influencing the perception of noise in the working area were length of career and lunchtime break. The perception level was high in the group with longer careers and dental hygienists who rest at lunch time. Factors influencing chemical exposure during work were the number of patients per day and the type of institute. Dental hygienists working in dental clinics or dealing with more patients had lower levels of perception. Conclusions: The sociodemographic and working characteristics of dental hygienists influence the perception of dental hygienists' environmental working conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4893-4901
• /
• 2013

In order for a machine, especially used in the defense industry, to consistently operate during its life-time, lots of study has been done in machine design as well as machine maintenance. However, the realistic study is necessary in management and operation of a military support facility, where spare parts are stored and retrieved. In this paper, efficient arrangement of spare parts are proposed to acquire increased in efficiency and decreased in cost for operation management of the military support facility. First, spare parts is assorted by MTBF(Mean Time Between Failure) and divided in to three groups A/B/C as an alternative arrangement. Each defined alternatives will go under simulations and RULA(Rapid Upper Limb Assessment), which is posture classification scheme evaluation attributes, to find working time and posture difficulty and lastly by entropy measurement to be selected. This research proposes the efficient spare parts arrangement in military support facility to minimize working time and posture difficulty. By taking system and human engineering approach together into consideration, it will lead to show a specific value.

• Journal of Korean Public Health Nursing
• /
• v.4 no.2
• /
• pp.59-77
• /
• 1990

The purpose of this study was to provide the basic data for the effective health management of the industrial workers, by classifying factors influencing their perceived symptoms to examine their health status and identifying the inter' relationship of their perceived symptom with their working department. the environment of working area and their general characteristics. The study was undertaken from October 1 to November 30. 1989. The subjects were 999 workers who had worked in Industrial Corps located in Chungbuk Province. The results of this study were as follows: I . Worker's perceived symptoms were classified according to the following eight factors; 1) musculo - skeletal symptoms of shoulder, neck, back and arm 2) optical symptoms 3) symptoms in head(such as headache and dull) 4) musculo - skeletal symptoms of leg and lower back 5) gastro - intestinal symptoms 6) mental symptoms. 7) neural symptoms 8) lung and heart symptoms II . The degrees of workers' perception of perceived symptoms; Mean score of perceived symptoms:7.0 The rank of degrees of perceived symptoms: The highest:musculo - skeletal symptoms of shoulder, neck, back, and arm The second:optical symptoms The third:musculo - skeletal symptoms of leg and lower back The fourth:mental symptoms the fifth:gastro-intestinal symptoms m . Analysis of the inter-relationship of perceived symptoms with working department, environment of working area and general characteristics; 1) sexuality The difference of degrees of perceived symptoms was significant;femanle was higher than male(P<0.000). 2) level of education The difference of degrees of perceived symptoms according to the level of education was significant; The higher the level of education, the higher the degree. 3) working department The working department played a significant part in the degrees of perceived symptoms of workers; Workers of assembling department:musculo-skeletal symptoms both of shoulder. neck, back and arm and of leg and lower back(P<0.000). Workers of inspection department:optical symptoms(P<0.05). Office workers:mental symptoms(P<0.05). 4) kinds of job The difference of the degrees of perceived symptoms according to kinds of job was significant; Workers dealing with chemical materials and workers dealing with job with high tension:gastro-intestinal symptoms and symptoms in head. Workers dealing with weighty things or working a long time with the same posture:musculo-skeletal symptoms both of shoulder, neck, back and arm and of lower back(P<0.000). 5) working posture The difference of the degrees of perceived symptoms related with working posture was significant; Sitting:optical symptoms(P<0.0000) and symptoms in head(P<0.005) Standing:musculo-skeletal symptoms of leg and lower back(P<0.0000). 6) satisfaction with their own duty The more dissatisfien they were. the higher became the degrees of their perceived symptoms(P<0.0001). 7) satisfaction with their working condition The more dissatisfied with their working condition they were, the higher became the degrees of their perceived symptoms(P<0.001). 8) environment of working area The environment of working area played a significant part in the degrees of perceived symptoms of workers; Workers exposed to most of the factors of the environment of working area were higher than those not exposed in the degrees of musculoskeletal symptoms. Workers in the noisy environment:optican symptoms(P<0.000), symptoms in head(P<0.005). Workers in the damp environment:optical symptoms(P<0.005) and lung and heart symptoms(P <0.01). Workers with illumination problem:optical symptoms(P<0.000), mental symptoms(P<0.005) and neural symptoms(P<0.01). Workers with ventilation problem:optical symptoms and lung and heart symptoms(P<0.001)

• Journal of the Korea Safety Management & Science
• /
• v.6 no.2
• /
• pp.35-48
• /
• 2004

The purpose of this study is to find injurious factors and to propose an improvement plan on workers' musculoskeletal disorders at a bakery workplace through analyzing the symptom, work posture and quantitative estimate. For this study, a survey and ergonomic estimate methods were adopted. According to the survey, it was analyzed that 429 workers corresponding to 68.2% of the response have been experienced the symptoms of musculoskeletal disorders such as an ache, prickle and numbness. The result of QEC analysis shows that shoulder and waist are highly exposed to musculoskeletal disease. The result of RULA analysis shows that injurious factors of muscle, weight and repeated operations are a little higher than those of operation posture. The result of SI estimate shows that pre-treatment of making bread requiring highly repeated operation gets the highest point of 81, on the other hand, chocolate-coating job requiring relatively low speed and short time gets the point of 4.5. Based on the analyzed results, improvement plan to prevent the musculoskeletal disorders against injurious working process of a bakery workplace. The goal of this study is to propose the improved scheme that prevents the workers against musculoskeletal disorders. A questionnaire and an ergonomic assessment method were adopted to analyze the symptoms of workers' musculoskeletal disorders, and an analysis of working postures and a quantitative assessment on various processes were performed to find out harmful factors of workplace.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.6
• /
• pp.549-555
• /
• 2013

Objective: The purpose of this study was to compare the performance of drilling on the ceiling in three different postures (standing, standing on the ladder and supine on the height adjusted board) and the subjective responses of perceived discomfort after the drilling. Background: Overhead work has been identified as a major occupational risk factor and has been a main research subject. Method: Ten young participants drilled 20 holes at the pre-marked places on the ceiling in three different postures. The drilling duration, resting and drilling heart rate were measured. The levels of perceived discomfort at neck, shoulder, elbow, hand and overall body were asked at the end of each task. Results: The working posture affected the heart rate after the drilling. Perceived discomfort in the neck decreased significantly in supine compared to drilling on the ladder. Conclusion: The results of this study suggest that drilling in supine can be an alternative way to reduce the drilling heart rate and the level of perceived discomfort in the neck without sacrificing the productivity. Application: The results of this study would be considered when drilling on the ceiling is required in construction workers.

• Korean Journal of Occupational Health Nursing
• /
• v.14 no.1
• /
• pp.5-15
• /
• 2005

Purpose: The purpose of this study are to identify the influencing factors on work-related musculoskeletal disorders of women workers. Method: Data were collected by questionnaires from 616 women workers from in such industries as electronics, food product, garment product and analyzed using descriptive statistics, multiple logistic regression. Result: As its result, 71.3% of female manufacturing workers had musculoskeletal symptom. When Multiple logistic regression analysis on factors relating to musculoskeletal symptoms was carried out, age, work posture, job demand, type of industry, working hour, type of work, family support were statistically significant variables. Conclusion: In conclusion, this study identifies that age, work posture, job demand, type of industry, working hour, type of work, family support are important factors affecting WMSDs.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.3
• /
• pp.271-281
• /
• 2021

Pinus densiflora and Larix kaempferi forests not only extended the plantation management area but also cultivated to the sustainable wood supply chain during the last 5-years. These prescriptions are primarily done by manual operation activities, particularly in young tree tending. Two types of tending activities, brashing by brush cutter(BB) and pruning by pruning shear and saw(PP), were selected for the investigate of musculoskeletal disorders' level and postural risks using Ovako Working Posture Analysis System (OWAS). The postural risk indexes (BB and PP) ranged from 115 to 125 and 102 to 105, respectively. There is no significant difference between the species. The young tree tending operations had low postural risks. The results may be used as basic data to develop technical guideline for safe young trees.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.2
• /
• pp.51-57
• /
• 2009

The goal of this study is to propose the effective method of investigating the injurious factors and make improvement plans that prevents the workers against musculoskeletal disorders at plastic product companies and the same business field with similar working conditions and process. A questionnaire are adopted to analyze the symptoms of workers' musculoskeletal disorders, and ergonomic assessment methods such as RULA, OWAS are performed to find out harmful factors of workplace and working posture. Based on the result of the evaluation, to enhance the working environment, improvement of worktable, working space, tools, and outfit was suggested, and induction of mechanical system was also suggested. It can be concluded that the method and process described in this paper could be helpful for diagnosing the musculoskeletal disorders risk factors and making improvement plans to the plastic product companies and the same business field with similar working conditions and process.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.4
• /
• pp.267-279
• /
• 2014

Objective: The objective of this study was to define the Dynamic Sitting (DS) through trend analysis and research on the Dynamic Chair (DC) and applied technologies. Background: The effects of changing posture on the human body have been studied to find out healthy sitting postures. It is believed that changing posture is effective in reducing disc pressure on spinal cord and preventing back pain and musculoskeletal disease. But, the definition of DS and trends of DC have not been researched yet. Therefore, trend analysis of DC and its applied technologies are required to define dynamic sitting posture. Method: We researched the type of occupant postures from previous studies. And then, sitting behaviors were classified into three types; (1) sitting and standing, (2) working and studying, (3) taking a rest. Results: Variety shapes of DC and applied technologies were found out. From the result, the trend of DC and applied technology were summarized from three perspectives. ; (1) changing the chair functions according to user's intention, (2) conversion of dynamic chair technologies to office chair mechanism, (3) enables the user to change their sitting posture without operating control device. Conclusion: From this study, we defined dynamic sitting posture and analyzed the trend of DC and its applied technologies. This result might be used to develop an office chair for healthy sitting. But further investigation is required to figure out the technologies and functions for development of healthy chair. Application: The results of the publishing trend analysis might help to determine design concept of office chair.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.1
• /
• pp.59-68
• /
• 2014

Objective: The aim of this study is to investigate the effect of BackJoy on how it effectively reduces the physical load generated in a posture in which the user sits, increases user's comfort and satisfaction, and maintains the correct posture. Background: Because of development of science and economic development, most office workers and students spend about 75% of their working time in chairs. However most of them have a poor posture. Method: This experiment conducted measurement using a pressure mat and surveyed to evaluate fatigue level, satisfaction and comfort of sit. The study is experimented 20 male and 14 female participants. The participants carried out four different types of tasks and each task took 20 minutes long. Results: In the case of experiment results before and after the use of BackJoy, average pressure, contact area and pressure per unit area appear to prove that using BackJoy is more effective. Conclusion: Through this study, the BackJoy's effects for the maintenance of good posture and loads that occur in the body are reduced. In the future study, there are some researches needed for various verifications using an EMG sensor that shows loads of vertebrae and we need to analyze each group of the participants by dividing them. Application: The evaluation method used in this study can be applied to evaluating ergonomic chairs.