• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.4
• /
• pp.71-77
• /
• 2007

In this study, reactions of central nervous systems working against different conditions of forced frequency and acceleration were measured and analyzed. The experiment are conducted with health men. The steady vibration conditions of forced frequency (0.315m/s2-1.0Hz, 0.315m/s2-10Hz and 10Hz-1.0m/s2) are used and the waves of EEG (Electroencephalogram) are measured. As a result, this paper shows that the ${\alpha}-wave$ of frontal lobe transfers from low to high frequency band under the vibration environment. Additionally, the average frequency of ${\alpha}-wave$ is higher under the vibration than under non-vibration environment. In the case of forced frequency of 1.0Hz-0.315m/s2, the feeling with the vibration are nearly same compared with the non-vibration condition. But in the case of 10Hz-1.0m/s2, uncomfortable feeling increased compared with the non-vibration condition. This study also shows the relationship between fluctuation slop and feeling. From this study, it is found that the effect of vibration on human depends on acceleration characteristics. Highly accelerating vibration is more harmful to human.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.10
• /
• pp.667-676
• /
• 2015

Working displacement variation by elastic deformation of active Gurney flap which was operated on high frequency was observed. Flap-wise natural frequency was lower than mode analysis result and hinge boundary condition was identified to be the cause through the simple modal test. Design modification for increasing natural frequency was conducted for minimizing the elastic deformation at maximum 35 Hz operating condition which was design requirement condition. Brass bushing was applied instead of rotating bearing for gap minimization and Gurney flap design modification was conducted to increase of the flap-wise natural frequency. Design modification effect was validated by natural frequency comparison with mode analysis result and modal test result of design modification model.

• Safety and Health at Work
• /
• v.6 no.2
• /
• pp.104-113
• /
• 2015

Background: Given the long hours on the road involving multiple and interacting work stressors (i.e., delivery pressures, irregular shifts, ergonomic hazards), commercial drivers face a plethora of health and safety risks. Researchers goal was to determine whether and to what extent long-haul trucker work schedules influence sleep duration and quality. Methods: Survey and biometric data collected from male long-haul truck drivers at a major truckstop in central North Carolina over a six month period. Results: Daily hours worked (mean = 11 hours, 55 minutes) and frequency of working over government-mandated daily HOS regulations (23.8% "frequently or always") were statistically significant predictors of sleep duration. Miles driven per week (mean = 2,812.61), irregular daily hours worked (63.8%), and frequency of working over the daily hour limit (23.8% "frequently or always") were statistically significant predictors of sleep quality. Conclusion: Implications of findings suggest a comprehensive review of the regulations and operational conditions for commercial motor vehicle drivers be undertaken.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.5
• /
• pp.427-433
• /
• 2015

Hot forging industry workers are prone to encounter several health risks due to lack of automation and poor working environment conditions. These workers particularly suffer from muscle fatigue owing to the constant handling of heavy products during the forging process. Thus we developed an assistant robot for workers who carry out hot forging tasks. The purpose of a robot is to compensate gravity-loads for heavy products. To verify the functionality of a robot, we performed a muscle fatigue analysis using Electromyography (EMG) signals. Four muscles of the upper extremity were chosen to measure muscle activity. And experiment conditions were setup to imitate the hot forging process. Post experimental analysis of the captured muscle activity revealed a reduction in the median frequency of the EMG signals, which means clear fatigue reduction due to a robot's assistance. The developed assist robot with compact and economical components can be efficiently utilized at forging work sites to create better working conditions for operators.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.2
• /
• pp.145-151
• /
• 2019

The coastal composite fishery has the highest rate of around 30.0% in registered fishing vessels of Korea for the last three years. The risk analysis for the fisher's safety of coastal composite fishing vessels was conducted to serve as a basic data for improving the healthy and safe working environment of fisher using fisher's occupational accidents of the national federation of fisheries cooperatives (NFFC) from 2016 to 2018 (n = 1,105). As a result, the occupational accident occurrence rate of coastal composite fishery was 3.76% in all industries, 7.8 times the rate of that. In addition, death and missing rate was found to have a serious level management to 10.10‱. Among the accidents, 76.0% occurred at sea. The slipping, others and contact with machinery or fishing gear occurred more frequently in order in the frequency of accident occurrence pattern. In the risk assessment using frequency and severity, slipping, contact with machinery and others showed high risk during fishing. The results are expected to contribute to identification and assessment of safety hazard occurred in coastal composite fishing vessels.

• Korean Journal of Childcare and Education
• /
• v.16 no.6
• /
• pp.253-272
• /
• 2020

Objective: This study aimed to analyze the counseling contents of daycare center teachers by using text mining and semantic network analysis methods to find the necessary support directions for daycare teachers and to improve the quality of child-care. Methods: Five hundred thirteen cases of counseling recorded on the open bulletin board of online counseling (Naver Bands for Nursery Teacher Counseling) were collected, and frequency analysis, centrality solidarity analysis, and machine learning-based topic analysis were conducted using the NetMiner4.3 program. Results: First, 'teacher-to-child ratio' was highest in the frequency. Second, 'colleagues' were all high in all centrality analysis. Third, machine learning-based topical analysis shows that the topics were categorized as subjects about 'childcare and education', 'working environment that supports professional development' and 'working condition', and among them, 'first-time teacher concerns' accounted for 44% of the total counseling content. Conclusion/Implications: This study implied that it is necessary to provide high-quality child-care and education to infants by lowering the 'teacher-to-child ratio', and a systematic program is needed to help improve effective communication skills in interpersonal relationships such as between parents, fellow teachers, and principals. In addition, self-development and efforts to improve teachers expertise should be prioritized in order to improve infant care quality and quality of teachers.

• Asian Oncology Nursing
• /
• v.1 no.2
• /
• pp.191-203
• /
• 2001

The health of a nurse is very important because her mental and physical health can influence toward nursing patients directly, Especially, Cancer patients are growing annually. Also, terminal cancer patients' nursing and dead place are increasingly using hospital and the period of nursing for cancer patients are increasing. Nursing for cancer patients are different with acute disease. Therefore, I analysed comparing nurses' health working in cancer and general ward so that nurses working at cancer ward could be developed as a professional nurse, and I wanted to establish the foundation of nursing administration and reasonable manpower management to supply good quality of nursing to patients. In my research, I selected 117 nurses working in cancer ward and 134 nurses working in general word to analyse the stress rate and nurse's health comparing nurses working in general ward and cancer ward. The survey was conducted of nurses working in cancer ward nurses in 2 university hospitals, nurses working in a cancer hospital, and general ward nurses working in 3 public hospital. Also, the data was collected from Sep. 13, 2001 to Sep. 28, 2001. As health measuring tool, I used Cornell Medical Index(CMI) which are developed to fit Koreans by Ko Ungrin and Park Hang-bas (1980) using Cornell Medical Services which were designed by Weiser, Brosman, Mittelman, Wechler, Wolff in Cornell University(1945). As working stress measuring tool, I used Questionaries which were designed by Kim Mae-ja and Ku Mi-ok(1984) and then developed by Bae In-sook(1996). For managing the data, I used frequency, percentage, ${\chi}^2$ verification, t-test, and F-test (ANOVA). And in the case of significant data(p<.05). I did Duncan's test for post verification. The mutual relation between health condition and working stress rate have been conducted using Pearson's Correlation Coefficient. Followings are the results of my research. 1. Two groups showed significant differency at age after testing homogeneous character between two groups (${\chi}^2$ =9.919, p=.007). 2. Comparing two group's health condition, cancer ward(average 19.35${\pm}$18.34) were higher than general ward(14.42${\pm}$10.59) and showed statistical significant differency(p=.009). And, comparing two group's mental condition, cancer ward(9.00${\pm}$9.79) were higher than general ward(7.13${\pm}$6.35) and statistically no differency. 3. After comparing two group's working stress rate, the rate of cancer ward nurse's working stress(3.36${\pm}$.50) is higher than general ward nurse (3.32${\pm}$.48). There are no significant differency. However, in the detailed verification test, there were significant differency at inappropriate compensation (t=3.254, p=.001) and medication issue (t=2.170, p=.031). 4. After comparing health condition at general points, physical health condition showed significant differency at age(p=.020), the number of children (p=.015), religion (p=.015), position(p=.005), career(p=.008), working satisfaction(p=.003), activity after office hour(p=.045); and mental health condition showed significant differency at position(p=.010), career (p=.017), working satisfaction (p=.003). 5. After comparing the working stress rate according to general points, there were significant differency at working satisfaction (F=5.285, p=.006), predicted nursing(F=3.822, p=.023). 6. At the relation of health condition and working stress rate between two groups. physical and mental condition showed significant relation with working stress rate. i.e, if a nurse's health condition is not good, she are feeling much more stress than others. After considering all the factors in my research, I found that the health condition and stress rate of cancer ward nurses is much higher than general ward nurses. Considering that cancer ward nurses is necessary to care for increasing cancer patients with mental and physical nursing, the less stress for cancer ward nurses is very important to develop nursing quality and working efficiency by keeping good health condition, specializing cancer ward nurses. Therefore, we need following studies to find the factors which are effecting to cancer ward nurses' health and specialization. Also, we need to improve managing working condition to decrease working stress by improving working condition.

• Korean Journal of Occupational Health Nursing
• /
• v.15 no.2
• /
• pp.133-143
• /
• 2006

Purpose: The purpose of this study was to examine the relationship between perceived job stress and work environmental factors related with socioeconomics factors and physical burden in the golf caddies. Methods: Job stress in golf caddies was estimated by using the Karasek's job content questionnaire (JCQ) and work environmental factors were estimated by self-reported questionnaire and interview. Results: The subjects were 316 woman caddies who had never been occupationally exposed to hazardous chemicals, was mean age 31.1 years. Mean work duration was 6.44 years and working hours per day on low- and high-demand season were 6.16 and 10.51, respectively. The golf caddies displayed higher scores of job stress due to multiple factors such as working hours and frequency of rounding per week, physical burden, confliction, income satisfaction and employment stability. We found that high strain group was positive correlation with age, career, working hour (including frequency of rounding) and job demand, however, showed negative correlation with job decision latitude and support of supervisor and coworker. Conclusion: In conclusion, we suggest that the golf caddies be regard divided into high strain group as appropriate. Thus, stress management and health promotion program for golf caddies should be developed.

• Journal of Fisheries and Marine Sciences Education
• /
• v.22 no.2
• /
• pp.218-230
• /
• 2010

This study was conducted to determine the effect of the noise level on the boarding environment in a stern trawl ship, KAYA(GT: 1,737 tons, Pukyong National University). We measured the noise level at a working, an accommodation and a teaching area, and an engine space on January 9, 2010 while the KAYA was sailing on a liner sea route. At the working area, the ranges of the noise rating number(NRN) and the NRN determination frequency(FNRN) were from 44 to 73 and from 1000 to 2000Hz, respectively. The results were generally satisfied the criteria of the International Maritime Organization(IMO). The noise level at the area, except the radio room(w2), was exceeded the criteria(50dB(A)) for the efficient studying and working. The noise level at the engine control room and the machine workshop was respectively exceeded 1.2dB and 9.5dB than the criteria caused the conversation disturbance (70dB(A)). At the accommodation, NRN and FNRN were from 49 to 54 and from 1000 to 4000Hz, respectively. The noise level was below the criteria of IMO, but above 40dB(A) caused the sleep disturbance. At the teaching area, NRN and FNRN were from 44 to 63 and from 500 to 2000Hz, respectively. The noise level was exceeded than the criteria(50dB(A)) for the efficient studying. At the engine space, NRN and FNRN were from 95 to 100 and from 2000 to 4000Hz, respectively. The noise level was above the criteria of IMO(90dB(A)) for the residence, while it was not exceeded 110dB(A) for the transient.

• Journal of Korea Society of Industrial Information Systems
• /
• v.5 no.2
• /
• pp.1-8
• /
• 2000

Manual material handling(MMH)is major factor which causing physical injuries of worker at working area and frequency of low back pain(LBP) is increasing industrial accidents. Especially, working in bad circumstance such as farm, orchard, harbor loading and unloading, logging place and mining place which located in inclined slope can cause much possibility of hazard and absence of working balance can cause injuries of musculoskeletal system such as joint, bone, ligament. So, this study used EMG system to measure and evaluate muscle force information and fatigue of worker when lifting on slope. The result of measuring averaged integrated EMG(AEMG) shows multifidus muscle be used more than anything else in force. neck extensors are used at 15°, 20°frequently. generally the AEMG result shows multifidus muscle be used in force. Commonly, muscle fatigue of multifidus is higher than other muscle by analysis mean power frequency(MPF). The result of load sharing rate shows multifidus and erectorspinae which are deep spinal muscles is relatively high and neck extensor is low.