• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.976-979
• /
• 2005

This paper is about the development of automatic FPC(flexible printed circuit) punching instrument for the improvement of working condition and cost saving. FPC is used to detect the contact position of keyboard and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation Is done manually, the accuracy of the punching degree is varied with operator's condition. To improve this manual punch ing operation to the FPC, automatic FPC punching system is introduced. Test algorithms and programs showed good results to the designed automatic punching system and led to the increasement of productivity and huge cost down to law material like FPC by avoiding bad quality.

• 한국의상디자인학회지
• /
• 제4권1호
• /
• pp.85-98
• /
• 2002

This study aims to present basic data on current uniforms for the practical improvement and quality betterment of their design by investigating and analysing the uniform designs worn by employees working in department stores, shopping malls and financial firms. For the research, after taking pictures of employees wearing uniforms from various occupations in Daejeon area from April 15 to May 24, 2001, the uniform styles, and the shape, color and pattern of each item were analysed by a group of four costume experts. The result is as follows: First, the uniform forms are classified by the style, and silhouette. It was found that the overall silhouette mostly consisted of hourglass silhouette, and two-piece suits. Second, for the color of each item, black was the most common color for the jacket, skirt, pants and white for the one-piece dress. Third, plain, abstract, and striped patterns, and polka dots were used for the uniforms. Among them the plain pattern accounts for the highest rate.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.124-132
• /
• 2004

A hydraulic system is difficult to keep the performance due to non-linearity, load pressure which changes according to working condition and system parameter variation, the requirement of control algorithm has been risen in order to satisfy them. An adaptive control is a control method which is suggested to achieve a control object though plant characteristics change. In spite of the case that plant characteristics and the degree of variation are difficult to grasp, adaptive control can keep the characteristics of closed-loop system regularly. In this study GMVAC(generalized minimum variance adaptive control) combined with output error feedback is proposed in order to solve problems of non-minimum phase, vibration and overshoot in initial response of the plant. The control performance according to the variation of characteristics of the plant is evaluated by changing the supply pressure only.

• 한국산업보건학회지
• /
• 제18권4호
• /
• pp.282-292
• /
• 2008

This study was conducted to evaluate work environment monitoring program(WMP) under Industrial Safety and Health Act in Korea. WMP was evaluated by focusing on five key elements, such as purpose, subject, scope, method and workers' participation. The operation status of WMP was evaluated by using questionnaire to workers and data published by Ministry of Labor(MOL). Compliance rate of WMP was less 13 % in manufacturing workplaces. Over-exposure rate was steady state by annual trend. The degree of workers' satisfaction to WMP was just 24 %. A critical problem with the current WMP is that the employer and workers are not acting as main players. For a fundamental improvement in working condition to take place, participation of workers should be expanded and be guaranteed by law.

• 한국조리학회지
• /
• 제14권4호
• /
• pp.27-40
• /
• 2008

This study focused on retraining programs for cuisiniers and drawing attention to the necessity of retraining and the new method of retraining for cuisiniers as a professional in a knowledge based society. Case study review and interviews followed by thorough review of related literatures were taken place to give suggestions and comments for the improvement of job performance enhance training for cuisiniers. Interviews were done with current participants and institutional trainers in March, 2008. Result from the interviews showed that retraining was really necessary. It was concluded that various retraining programs organized and developed by an association could be the solution. Methods of retraining can take formats of distance learning, classroom learning, and blended learning. However, working condition for most cuisiniers at present would allow them to squeeze some time off to attend higher education and most restaurant companies are not big enough to offer systematic job training on site or not stable enough to arrange replacement workers. It is therefore suggested to adopt a blended learning method and further study on this subject is highly recommended.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 추계학술대회 논문집
• /
• pp.84-89
• /
• 1998

BTA drilling among the deep hole drilling is using for the improvement of productivity and the high-efficient working. As the deep hole drilling with BTA drill is satisfied with the required quality by one-pass processing, more deeper hole depth, the accuracy of materials is affected by bending vibration and cutting speed. This paper is studied that the shapes of material (surface roughness, roundness) is affected by cutting condition compared actual roundness with lobe shape with modeling of computer through the experiments in the BTA drilling system with BTA drill.

• 소성∙가공
• /
• 제12권8호
• /
• pp.738-743
• /
• 2003

The major problems of a plastic injection mould can be devided into two kinds, one is in mould another in injected parts. Most of defects of the former comes from mould design, such as, structure and working. The latter are weld line, warpage, sink mark, burning, flow mark, scratching, shading, black hole and so on. Most of problems in injection molding are difficult to find the reason because of complexity. The purpose of this paper is to improve the quality of plastic injection mould and parts with inquiring the counter plan and analizing troubles of the part of Flat TV Front Cover by flow control method and gas-assisted injection moulding. For minimizing defects of the injection moulded parts, computer aided simulation method for injection mould filling was used. Based on these numerical results, the guidelines of mould design and injection processing condition were established. As a result, the improvement of quality, such as minimizing surface defects of injection moulding parts and troubles in mould was achieved.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.307-308
• /
• 2006

This paper is about the development of automatic inspection system of welded nuts on Support hinge using machine vision for the improvement of working condition. Until now, projection welding process was performed by operator. Also, inspection of welded nuts is performed manually and recorded by the operator's naked eye. So these processes caused the produce of poorly-made articles. To improve this manual operation, inspection system using machine vision is introduced. Test algorithm, lighting system and program showed good results to the designed inspection system and led to the increment of productivity.

• 한국실내디자인학회논문집
• /
• 제14권3호
• /
• pp.173-180
• /
• 2005

The program of practical training of architectural interior will be change for improvement of not only to complete design on the table but to be in employee market flexibly also. It's necessary to take the educational efficiency for the practical training in the course of intoner architecture. The characteristic of interior space in the model for useful practice is residential space. the interior construction to be controled generally on the central axis of interior architecture, although there were several items of construction which divided architectural structure, electrical power, air control est. the process of practical training is to be established not only with object of training, grade of skill, materials and equipments and tools of it's prepare and working, but safety on the job training.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.419-422
• /
• 1999

We prepared CoCr thin film for perpendicular magnetic recording media by facing targets sputtering system(FTS system) which can deposit a high quality thin films in plasma-free state and wide range of working pressure. In this study, we investigated that the effect of sputtering condition , that Argon gas pressure and substrate temperature, on magnetic and crystallographic characteristic of CoCr thin film as well as the variation perpendicular coercivity in changing of film's thickness. Crystallographic and magnetic characteristic of prepared thin films were evaluated by x-ray fractometry(XRD), vibrating sample magnetometer(VSM) and kerr hysteresis loop measurement.