• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.234-237
• /
• 2007

To protect a satellite and electronic equipment from the acoustic load generated by rocket propulsion system, many launch vehicle use acoustic blanket. Acoustic load is main source of random vibration working on the payload. Most high frequency region of the acoustic loads is reduced by payload fairing skins and acoustic blanket, but low frequency region is not. In order to reduce acoustic load of low frequency region, we designed array resonator panel which was made of composite materials. Insertion loss capacity of the payload fairing with acoustic blanket was verified from PLF acoustic test in the acoustic chamber.

• Environmental Engineering Research
• /
• v.18 no.3
• /
• pp.157-161
• /
• 2013

Treatment of textile wastewater by the electrocoagulation (EC) process is being investigated by this experimental study. The objective of this experiment is to observe the efficiency of the EC process in removing chemical oxygen demand (COD) and turbidity. In this experiment an iron electrode is used in the EC process, and different working parameters such as pH, current density and operating time were studied in an attempt to achieve a higher removal capacity. The results show that the maximum COD removal occurred at neutral pH at operating time 30 min. COD and turbidity removal reaches at maximum, with optimum consumption of electrodes, between current density 85-95 $A/m^2$, and only trace amounts of metals were determined in the EC treated effluent.

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1421-1428
• /
• 2015

The efficiency and reliability of the dual-buck inverter (DBI) were greatly improved by eliminating the shoot-through problem and optimally designing the freewheeling diode. The traditional DBI suffers from large harmonic components with low output voltage and large capacity output filter inductor. To overcome the aforementioned disadvantages, a modified DBI (MBDI) was proposed by adopting a quasi-resonant link and pulse density modulation (PDM). This paper first introduces the working principle of the MBDI and PDM, and then the selection principle of system parameters is presented. Finally, a mathematical model of the MBDIis built, and an experiment prototype is set up. Simulation and experimental results verify the correctness of the theoretical analysis and the feasibility of the scheme.

• Transactions of Materials Processing
• /
• v.14 no.7 s.79
• /
• pp.613-618
• /
• 2005

The paper is concerned with the process design and the die design for manufacturing the preform of a large pressure vessel. The cold-working processes are introduced to improve the fatigue strength and to simplify the manufacturing process. By the finite element simulation, the parameter design is carried out, which is subjected to constraints such as the blank sire, press capacity and other minor limitations. The proposed design results are verified by the model experiments, in which the model is scaled down to one tenth of the original size.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2001.02a
• /
• pp.159-162
• /
• 2001

A Stirling cryocooler is relatively compact, reliable, commercially available, and uses helium as a working fluid. The FPFD stirling cryocooler consists of two compressor pistons driven by linear motors which makes pressure waves and a pneumatically driven displacer piston with regenerator. It is the most suitable design for a mechanical cryocooler utilized in night vision environment. In order to get optimum operating frequency, natural frequency of piston and displacer, optimum phase angle between piston and displacer, cooling capacity, performance tests of the Stirling cryocooler by the frequency characteristics were performed.

• Journal of Agricultural Extension & Community Development
• /
• v.5 no.2
• /
• pp.153-164
• /
• 1998

Rural Environmental Planning (REP) is a method used by citizens in small towns and rural areas to plan their own future. REP assumes that the primary social value of rural people is to enhance a community's longterm viability by respecting the carrying capacity of the natural environment. REP derives its strength from the direct participation of those people affected by a plan. They determine its goals, shape its content, and implement its components. And both the rural environmental planner and the citizens involved in planning in their community must have a working knowledge of the legal framework of planning. In the results, REP reduces the cost of planning by drawing public agencies, not-for-profit organizations, volunteers from the private sector, and all vital resources available to rural people when they plan for their future.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.5
• /
• pp.546-553
• /
• 2015

Recently, flash cache is widely adopted as the performance accelerator of legacy storage systems. Unlike other cache media, flash cache should be carefully managed as it has peculiar characteristics such as long write latency and limited P/E cycles. In particular, we make two prominent observations that can be utilized in managing flash cache. First, a serious worn-out problem happens when the working-set of a system is beyond the capacity of flash cache due to excessively frequent cache replacement. Second, more than 50% of data has no hit in flash cache as it is a second level cache. Based on these observations, we propose a cache admission control policy that does not cache data when it is first accessed, and inserts it into the cache only after its second access occurs within a certain time window. This allows the filtering of data disruptive to flash cache in terms of endurance and performance. With this policy, we prolong the lifetime of flash cache 2.3 times without any performance degradations.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.590-595
• /
• 2001

We must maintain the maximum operation capacity for production facilities and find properly out the fault diagnosis of the possessing equipments rapidly so as to decrease a loss caused by its failure. In this paper, we performed the fundamental study which develops a system of fault for a individually using pump widely or a pump as parts of the other machines. For each normal products, artificially transformed products, and working products under critical condition, we experimented in vibration, compared and analysed. Some faults showed into characteristic vibrations and other faults did not show consistent characters.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.172-176
• /
• 2001

A Stirling cryocooler is relatively compact, reliable, commercially available, and uses helium as a working fluid. The FPFD stirling cryocooler consists of two compressor pistons driven by linear motors which makes pressure waves and a pneumatically driven displacer piston with regenerator. A free piston and free displacer(FPFD) Stirling cryocooler for cooling infrared and cryo-sensors is currently under development at KIMM(Korea Institute of Machinery & Materials). In order to evaluate the feasibility of using a linear motor driving cryocooler, prototype Stirling cryocooler with a nominal cooling capacity of 0.5W at 80K was designed, fabricated and tested. The prototype has achieved no load temperature of 51K and cooling power of 0.33W.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.197-205
• /
• 2007

Radio frequency identification, or RFID, is a generic term for technologies that use radio wave to automatically identify people or objects. UHF RFID technology is used for everything from tracking goods within their supply chain, working in process and for other applications. If RFID is applied in wheel scanner that is a important equipment to measure a diameter, width, height of wheel, efficiency in maintenance will be improved because of checking data in real-time. In domestic technology, capacity of wheel scanner technology as well as RFID are less good than foreign goods there a up to current day a point of read range, anti-collision, a tolerance. Therefore, sturdy on the development of wheel scanner using RFID technology to measure wheel in maintenance of rolling stock was carried out in this paper.