• Geomechanics and Engineering
• /
• v.29 no.2
• /
• pp.113-131
• /
• 2022

A rockburst is a common disaster in deep-tunnel excavation engineering, especially for high-geostress areas. An anomalously low friction effect is one of the most important inducements of rockbursts. To elucidate the correlation between an anomalously low friction effect and a rockburst, we establish a two-dimensional prediction model that considers the discontinuous structure of a rock mass. The degree of freedom of the rotation angle is introduced, thus the motion equations of the blocks under the influence of a transient disturbing force are acquired according to the interactions of the blocks. Based on the two-dimensional discontinuous block model of deep rock mass, a rockburst prediction model is established, and the initiation process of ultra-low friction rockburst is analyzed. In addition, the intensity of a rockburst, including the location, depth, area, and velocity of ejection fragments, can be determined quantitatively using the proposed prediction model. Then, through a specific example, the effects of geomechanical parameters such as the different principal stress ratios, the material properties, a dip of principal stress on the occurrence form and range of rockburst are analyzed. The results indicate that under dynamic disturbance, stress variation on the structural surface in a deep rock mass may directly give rise to a rockburst. The formation of rockburst is characterized by three stages: the appearance of cracks that result from the tension or compression failure of the deformation block, the transformation of strain energy of rock blocks to kinetic energy, and the ejection of some of the free blocks from the surrounding rock mass. Finally, the two-dimensional rockburst prediction model is applied to the construction drainage tunnel project of Jinping II hydropower station. Through the comparison with the field measured rockburst data and UDEC simulation results, it shows that the model in this paper is in good agreement with the actual working conditions, which verifies the accuracy of the model in this paper.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.5
• /
• pp.235-241
• /
• 2002

The process of energy separation in a low pressure vortex tube with air as a working medium is studied In detail. Experimental data of the temperature of the cold and hot air leaving the vortex tube are presented. The variation of the maximum wall temperature along the inner surface of the vortex tube and the temperature distribution in the vortex tube provides useful information about the location of the stagnation point of the flow field at the axis of the vortex tube. In this study Outer tube is used for the application of Diesel engine exhaust. The hot gas flow is fumed 180° and passes the outside of the vortex tube a second time heating it. From this geometric setup of a vortex tube the effects of energy separation and the prediction of the ignition of Diesel Soot is presented by experimental data.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.4
• /
• pp.401-407
• /
• 2011

The conventional method of magnetic abrasive polishing is not suitable for non-magnetic materials because such polishing is basically possible when magnetic force exists and the magnetic force in non-magnetic materials is very low. The installation of an electromagnet under the working area of a non-magnetic material, which is called second-generation magnetic abrasive polishing in this study, can enhance the magnetic force. Experimental evaluation and optimization of process parameters for polishing magnesium alloy steel was performed by adopting the design of experiments and the response surface method. The results indicated that the intensity of the magnetic force and spindle speed are significant parameters that affect the improvement of surface roughness. A prediction model for the surface roughness of the magnesium alloy steel is developed using the second-order response surface method.

• Journal of Korean Academy of Nursing Administration
• /
• v.14 no.2
• /
• pp.107-117
• /
• 2008

Purpose: The aim of this study was to testify effectiveness and adaptability of the job characteristics model in nursing organization. Methods: The subjects of this study were 250 nurses who were working in the 2 general hospitals located in Metropolitan city area. The data were collected by self-reporting questionnaires. The data were analyzed using descriptive statistics and path analysis. Results: The modified path model revealed a highly fitness of the data in the overall fitness indexes. The prediction power of modified model was from 44% to 58%, which was very high. The highest predict factors of organizational commitment were identified meaning of empowerment and feedback of job characteristics. The highest predict factors of job satisfaction were identified impact of empowerment and autonomy of job characteristics. Conclusion: With these findings, it was suggested that the nursing job-redesign plan focused on nursing feedback and autonomy among the job characteristics was needed to increase the nurse’ empowerment as well as nursing organizational effectiveness.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.6
• /
• pp.573-583
• /
• 2005

Fugitive dust, which is emitted in the ambient air without first passing through a stack or duct designed to control flow, is frequently generated by means of wind erosion from storage yards at Pohang Steel Wokrs. The size distribution of fugitive dust is mostly in the range of coarse particulate which is deposited as soon as emitted and less harm to human health; however $20\%$ of fugitive dust contains PM 10 known as one of most harmful airborne pollutant. Consequently, effective control and reduction of fugitive dust is strongly requested by the local society, but it is not easy so far because the generation and dispersion of fugitive dust highly depends on meteorological conditions, and it being occurred for irregularity. This research presented a fugitive dust control system for each meteorological condition by providing statistical prediction data obtained from a statistical analysis on the probability of generating the threshold velocity at which the fugitive dust begins to occur, and the frequency occurring by season and by time of the wind direction that can generate atmospheric pollution when the dispersed dust spreads to adjacent residential areas. The research also built a fugitive dust detection system which monitors the weather conditions surrounding storage yards and the changes in air quality on a real-time basis and issues a warning message by identifying a situation where the fugitive dust disperses outside the site boundary line so that appropriate measures can be taken on a timely basis. Furthermore, in respect to the spraying of water to prevent the generation of fugitive dust from the storage piles at the storage yard, an advanced statistical meteorological analysis on the weather conditions in Pohang area and a case study of fugitive dust dispersion toward outside of working field during $2002\∼2003$ were carried out in order to decide an optimal water-spraying time and the number of spraying that can prevent the origin of fugitive dust emission. The results of this research are expected to create extremely significant effects in improving surrounding environment through actual reduction of the fugitive dust produced from the storage yard of Pohang Steel Works by providing a high-tech warning system capable of constantly monitoring the leakage of fugitive dust and water-spray guidance that can maximize the water-spraying effects.

• Journal of Biosystems Engineering
• /
• v.41 no.3
• /
• pp.255-262
• /
• 2016

Purpose: Fuji apples are one of the top selling exports for South Korea bringing in over $233.4 million in 2013. However, during the last few decades, about half of the Fuji apple orchards have been infected by Apple Marssonina Blotch disease (AMB), a fungal disease caused by Diplocarpon mali., which takes about 40 days to exhibit obvious visible symptoms. Infected leaves turn yellow and begin growing brown lesions. AMB promotes early defoliation and reduces the quality and quantity of apples an infected tree can produce. Currently, there is no prediction model for AMB on the market. Methods: The Precision Agriculture Laboratory (PAL) at the University of Florida (UF) has been working with the National Academy of Agricultural Science, Rural Development Administration, South Korea to investigate the use of hyperspectral data in creating an early detection method for AMB. The RDA has been researching hyperspectral techniques for disease detection at their Apple Research Station in Gunwi since 2012 and disseminates its findings to the local farmers. These farmers were surveyed to assess the state of knowledge of AMB in the area. Out of a population of about 750 growers, 111 surveys were completed (confidence interval of +/- 8.59%, confidence level of 95%, p-value of 0.05). Results: The survey revealed 32% of the farmers did not know what AMB was, but 45% of farmers have had their orchards infected by AMB. Twenty-five percent could not distinguish AMB from other symptoms. Overwhelmingly, 80% of farmers strongly believed an early detection method for AMB was necessary. Conclusions: The results of the survey will help to evaluate the outreach programs of the RDA so they can more effectively educate farmers on the identifying, treating, and mediating AMB.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.2
• /
• pp.79-91
• /
• 2019

In the entertainment industry, risk management is crucial for securing competitiveness due to the risk of investment. The competitiveness of contents is reinforced when external factors such as industrial environment and internal factors centering on involving mechanism are simultaneously provided. The involving mechanism is a form of cognitive response behavior of the audience and occurs through signal processing of the brain when watching the image contents. The signal processing of the brain related to the contents watching is mainly performed in the working memory area, and in the case of the captivating movie, the information other than the contents transmitted to the audience is blocked to generate a temporary dissociation state. A dissociation state similar to a symptom such as hypnosis or amnesia occurs when the audience's level of involving is high. On the other hand, contents information in which the audience is concentrating his attention is used intensively for constructing future thinking through an episodic buffer while the inflow of external information is relatively blocked or delayed. The spectator's future thinking configuration takes the form of a hypothesis-forming activity and is based on the predictability of the brain. When these hypothesized behaviors correspond to the problem solving simulation of story and predictability which is an evolutionary function of the brain, the audience' s brain is involved in the contents at a high level. In order for the act to be effective, the factors such as the background of the hypothesis, the subject of the hypothesis, the internal information of the person, the type and position and quantity of the hypothesis information, and the hypothesis relevance and type of information are important. Based on these factors, analysis of the Kim Eun Sook Drama 'Goblin' shows that the above elements are operated in a very organic and meaningful way.

• Annals of Occupational and Environmental Medicine
• /
• v.35
• /
• pp.24.1-24.15
• /
• 2023

Background: The construction workers are vulnerable to fatigue due to high physical workload. This study aimed to investigate the relationship between overwork and heart rate in construction workers and propose a scheme to prevent overwork in advance. Methods: We measured the heart rates of construction workers at a construction site of a residential and commercial complex in Seoul from August to October 2021 and develop an index that monitors overwork in real-time. A total of 66 Korean workers participated in the study, wearing real-time heart rate monitoring equipment. The relative heart rate (RHR) was calculated using the minimum and maximum heart rates, and the maximum acceptable working time (MAWT) was estimated using RHR to calculate the workload. The overwork index (OI) was defined as the cumulative workload evaluated with the MAWT. An appropriate scenario line (PSL) was set as an index that can be compared to the OI to evaluate the degree of overwork in real-time. The excess overwork index (EOI) was evaluated in real-time during work performance using the difference between the OI and the PSL. The EOI value was used to perform receiver operating characteristic (ROC) curve analysis to find the optimal cut-off value for classification of overwork state. Results: Of the 60 participants analyzed, 28 (46.7%) were classified as the overwork group based on their RHR. ROC curve analysis showed that the EOI was a good predictor of overwork, with an area under the curve of 0.824. The optimal cut-off values ranged from 21.8% to 24.0% depending on the method used to determine the cut-off point. Conclusion: The EOI showed promising results as a predictive tool to assess overwork in real-time using heart rate monitoring and calculation through MAWT. Further research is needed to assess physical workload accurately and determine cut-off values across industries.

• Tunnel and Underground Space
• /
• v.25 no.2
• /
• pp.186-198
• /
• 2015

This paper aims for the ultimate goal to optimize the work place environment through assuring the optimal required ventilation rate based on the analysis of the airflow. The working environment is deteriorated due to a rise in temperature of a coal mine caused by increase of its depth and carriage tunnels. To improve the environment, the ventilation evaluation on J coal mine is carried out and the effect of a length of the tunnel on the temperature to enhance the ventilation efficiency in the subsurface is numerically analyzed. The analysis shows that J coal mine needs $17,831m^3/min$ for in-flow ventilation rate but the total input air flowrate is $16,474m^3/min$, $1,357m^3/min$ of in-flow ventilation rate shortage. The temperatures were predicted on the two developed models of J mine, and VnetPC that is a numerical program for the flowrate prediction. The result of the simulation notices the temperature in the case of developing all 4 areas of -425ML as a first model is predicted 29.30 at the main gangway 9X of C section and in the case of developing 3 areas of -425ML excepting A area as a second model, it is predicted 27.45 Celsius degrees.

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.3 s.27
• /
• pp.313-322
• /
• 1989

The present status of the traffic accident rate in Korea shows that it is the highest in the world with a continuously increasing trend. Human factors account for 90% of the causes of traffic accidents. Therefore, the purpose of this study was to determine some human factors related to traffic accidents by studying the relationship between health status and traffic accidents. To accomplish this purpose, all taxi companies located in the Seoul area were divided in three groups according to the number of taxi possessed, then some companies in each ?roup were randomly selected for study, and a total of 222 drivers in those selected companies were questioned and examined from April 15 to April 22, 1989. Seventy drivers among 222 had experienced a traffic accident. A $x^2$-test was performed on the data, then, factor analysis and discrminant analysis were executed with the following results: 1. The drivers complaining of gastroenteric symptoms numbered 110(49.5%), which was the major symptom among all drivers complaining of poor health. 2. In the primary analysis, variables related to traffic accidents were divided into general, occupational, and health characteristics. Drivers having no traffic accident experience and drivers having that experience were subjected to question about age, educational level, residential status, monthly average income, working hours and days, degree of satisfaction with their profession and homelife, degree of worry about health. degree of fatigue, medication, drunken driving, and illness, but there were no statistical significances. 3. In the factor analysis, the 8 health variables which cause traffic accidents were classified into 3 common factors which were perceived health factor, sleeping and drunken driving, and visual acuity and smoking factor. Perceived health was the factor which contributed most to explaining accidents. 4. In the discriminant analysis, a correct prediction rate of 68.0% was obtained in the factors of all the characteristics. 5. Degree of sttisfaction with their homelife and educational and economic factor in the general characteristics, degree of satisfaction with their profession in the occupational characteristics, and sleeping and drunken driving in the health characteristics were selected as statistically significant factors to discriminant the traffic accident. 6. Among the factors of the general, occupational, and health characteristics, degree of satisfaction with their homelife, driving experience, family factor, perceived factor were selected as the statistically significant factors.