• Healthcare Informatics Research
• /
• v.24 no.4
• /
• pp.381-386
• /
• 2018

Objectives: This study aimed to describe the process of utilizing a mobile application for ecological momentary assessment (EMA) to collect data on stress and mood in daily life setting. Methods: A mobile application for the Android operating system was developed and installed with a set of questions regarding momentary mood and stress into a smartphone of a participant. The application sets alarms at semi-random intervals in 60-minute blocks, four times a day for 7 days. After obtaining all momentary affect and stress, the questions to assess the usability of the mobile EMA application were also administered. Results: The data were collected from 97 police officers working in Gyeonggi Province of South Korea. The mean completion rate was 60.0% ranging from 3.5% to 100%. The means of positive and negative affect were 18.34 of 28 and 19.09 of 63. The mean stress was 17.92 of 40. Participants responded that the mobile application correctly measured their affect ($4.34{\pm}0.83$) and stress ($4.48{\pm}0.62$) of 5-point Likert scale. Conclusions: Our study investigated the process of utilizing a mobile application to assess momentary affect and stress at repeated times. We found challenges regarding adherence to the research protocol, such as completion and delay of answering after alarm notification. Despite this inherent issue of adherence to the research protocol, the EMA still has advantages of reducing recall bias and assessing the actual moment of interest at multiple time points that improves ecological validity.

• Steel and Composite Structures
• /
• v.31 no.1
• /
• pp.13-25
• /
• 2019

Reactive powder concrete (RPC) is a type of ultra-high strength concrete that has a relatively high brittleness. However, its ductility can be improved by confinement, and the use of RPC in composite RPC filled steel tube columns has become an important subject of research in recent years. This paper aims to present an experimental study of axial capacity calculation of RPC filled circular steel tube columns. Twenty short columns under axial compression were tested and information on their failure patterns, deformation performance, confinement mechanism and load capacity were presented. The effects of load conditions, diameter-thickness ratio and compressive strength of RPC on the axial behavior were further discussed. The experimental results show that: (1) specimens display drum-shaped failure or shear failure respectively with different confinement coefficients, and the load capacity of most specimens increases after the peak load; (2) the steel tube only provides lateral confinement in the elastic-plastic stage for fully loaded specimens, while the confinement effect from steel tube initials at the set of loading for partially loaded specimens; (3) confinement increases the load capacity of specimens by 3% to 38%, and this increase is more pronounced as the confinement coefficient becomes larger; (4) the residual capacity-to-ultimate capacity ratio is larger than 0.75 for test specimens, thus identifying the composite columns have good ductility. The working mechanism and force model of the composite columns were analyzed, and based on the twin-shear unified strength theory, calculation methods of axial capacity for columns with two load conditions were established.

• Journal of Broadcast Engineering
• /
• v.24 no.2
• /
• pp.273-280
• /
• 2019

360 video is attracting attention as immersive media with the spread of VR applications, and MPEG-I (Immersive) Visual group is actively working on standardization to support immersive media experiences with up to six degree of freedom (6DoF). In virtual space of omnidirectional 6DoF, which is defined as a case of degree of freedom providing 6DoF in a restricted area, looking at the scene at any viewpoint of any position in the space requires rendering the view by synthesizing additional viewpoints called virtual omnidirectional viewpoints. This paper presents the performance results on view synthesis and their analysis, which have been done as exploration experiments (EEs) of omnidirectional 6DoF in MPEG-I. In other words, experiment results on view synthesis in various aspects of synthesis conditions such as the distances between input views and virtual view to be synthesized and the number of input views to be selected from the given set of 360 videos providing omnidirectional 6DoF are presented.

• Physical Therapy Rehabilitation Science
• /
• v.7 no.4
• /
• pp.191-196
• /
• 2018

Objective: The purpose of this study was to investigate the effects of 5 different personalities on job stress in physical therapists. Design: Descriptive cross-sectional study. Methods: Structured self-report questionnaires consisted of demographic items, 5 types of personalities, and occupational stress. A questionnaire was distributed to 420 physical therapists working in Seoul and Incheon who had voluntarily agreed to participate in the study after the purpose of the study was explained. Of the 420 questionnaires, 405 questionnaires were collected and showed a recovery rate of 96.4%, of which 28 cases were excluded, leaving a total of 377 questionnaires being used for analyses. Pearson correlation analysis was performed to investigate the correlation of job stress and five personalities types. In addition, multiple regression analysis was performed to investigate the effect of general and occupational characteristics of physical therapist on job stress and the effect of personality type on occupational stress. All statistical significance levels were set at p<0.05. Results: The highest number of subjects, which were the physical therapists, showed the tendency to have a sincere personality, followed by affinity, openness, extroversion, and neuroticism. Physical therapists reported to be the most stressed in the order of professional role conflict, overload of work, work relation with a physician and supervisor, interpersonal relationship with patient and caregiver. The higher the level of affinity and sincerity, the lower the amount of stress received by the therapist from the interpersonal relationships between the patient and caregivers. On the other hand, the greater the level of openness and sincerity, the lower the stress levels related to professional role conflict. Conclusions: This study showed that the personality type and job stress of physiotherapists had a statistically significant effect. It is very important for physiotherapists to find their own way of coping with stress, which is satisfactory and appropriate for their job, because it is related not only to individual problems but also to the quality of patient care and medical services. Therefore, it is necessary to continue conducting research on how to relieve the stress levels of physical therapists according to their personality characteristics.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.3
• /
• pp.61-72
• /
• 2018

This study pursued to obtain 3 consecutive purposes. First, a conceptual model for comparing 3 constructivist teaching and learning strategies( problem-based learning[$P_bBL$], case-based learning[CBL] and project-based learning[$P_jBL$]) was developed. Relationships of these constructivist strategies with the development of expertise for learners were discussed. Second, specific differences between $P_bBL$, CBL and $P_jBL$ as applied in architectural design courses were analyzed under each of the teaching and learning category. Some analytical indexes were developed by content analysis, which are applicable effectively to reveal the differences. Based on the previous findings, third, a set of strategic guidelines for use in class were made and suggested in order to develop and improve expertise in architectural design. These guidelines were largely targeted for university design courses as well as education or reeducation of practicing architects. Expecially, combined application of $P_bBL$, CBL and $P_jBL$ was hypothesized and suggested as class management guidelines. In sum, a variety of $P_bBL$ problems, CBL cases and $P_jBL$ projects should be developed for expecting audience based on design subjects and tasks. As working domains of practicing architects, exploring/analyzing, understanding/making applications, and criticizing/self-reflecting should be considered in the development process.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.1
• /
• pp.35-44
• /
• 2021

Recent advances in the 4th Industrial Revolution have accelerated the change of the working environment, such that the paradigm of education has been shifted in accordance with career education including the free semester system and the high school credit system. While the purpose of those systems is students' self-motivated career exploration, educational limitations for teachers and students exist due to the rapid change of the information on education. Also, education technology research to tackle these limitations is relatively insufficient. To this end, this study first defines three requirements that education technologies for the career education system should consider. Then, through data-driven artificial intelligence technology, this study proposes a data system and an artificial intelligence recommendation model that incorporates the topics for career exploration, courses, and majors in one scheme. Finally, this study demonstrates that the set-based artificial intelligence model shows satisfactory performances on recommending career education contents such as courses and majors, and further confirms that the actual application of this system in the educational field is acceptable.

• Korea Journal of Hospital Management
• /
• v.25 no.4
• /
• pp.60-75
• /
• 2020

Purpose: This study aims to develop a cost model for NRP (Nursing Residency Program) operation and ultimately provide evidence for financial factors for NRP operation in the future by simulating a cost model. Methodology: This study developed a model for the NRP education cost calculation model based on the review of Hansen's model, which has systematically reported on the development and operation of NRP, and discussions with nursing education experts at a university-affiliated hospital. With the simulation, it was intended to predict nurses' supply and demand in the long term and to calculate changes in long-term education costs. Findings: Firstly, turnover model, term model, cost model necessary for calculating a model for the NRP education cost calculation model was set up. Secondly, the simulation showed the following results; 1) the proportion of newly graduated nurses less than 5 years of working decreases gradually over time, which will make the composition of nurses more balanced. 2) In the first year of the partial introduction of NRP, the cost of training new nurses was about 2.1 times higher than before. After the introduction, the training cost in the 13th year began to be lesser than before the introduction, and in the 25th year, it decreased by 28.1% compared to before the introduction. Practical Implications: Firstly, NRP would be an effective way to solve the higher turnover and frequent departure of new nurses and the imbalance of nurses' composition. Secondly, although the costs of NRP are incurred in the early stages, in the end, NRP training costs are reduced compared to before the introduction of NRP. It is necessary to systematically understand the contribution effect of NRP by analyzing the economic value of NRP considering financial and non-monetary returns in the future and providing a basis for decision-making related to NRP implementation.

• PNF and Movement
• /
• v.18 no.3
• /
• pp.393-401
• /
• 2020

Purpose: In recent years, there has been increasing interest in using blood flow-restricted exercise (BFRE) or KAATSU training. The KAATSU training method, which partially restricts arterial inflow and fully restricts venous outflow in the working musculature during exercise at reduced exercise intensities, has been proven to result in substantial increases in both muscle hypertrophy and strength. The purpose of this study was to investigate the proper level of pressure for KAATSU training using compound muscle action potential (CMAP) analysis. Methods: Twenty-two healthy adults voluntarily participated in this study. CMAP was conducted by measuring the terminal latency and amplitude using a motor nerve conduction velocity test. For reference-line, supramaximal electrical stimulation was applied to the median nerves of the participants to obtain CMAP for the abductor pollicis brevis. For baseline, the intensity of the electrical stimulation was decreased to a level at which the CMAP amplitude was about a third of the CMAP amplitude obtained by the supramaximal electrical stimulation. The pressure levels for the KAATSU were set as a systolic blood pressure (strong pressure), the median values of systolic and diastolic blood pressure (intermediate pressure), and diastolic blood pressure (weak pressure). In the KAATSU condition, CMAP was performed under the same conditions as baseline after low-intensity thumb abduction exercises were performed at the subjects' own pace for one minute. Results: As the pressure increased, the CMAP amplitude was significantly increased, signifying that more muscle fibers were recruited. Conclusion: This study found that KAATSU training recruited more muscle fibers than low-intensity exercise without the restriction of blood flow.

• Journal of Arbitration Studies
• /
• v.32 no.1
• /
• pp.25-42
• /
• 2022

The modern arbitration practice recognises the need for a faster and simplified procedural framework for international disputes with fairly low amounts at stake. This has driven several institutions to expand their offer of procedural guidelines with a simplified set of rules that would fit this purpose. Expedited arbitration is increasingly used by parties and is growing in popularity. The basic idea behind establishing expedited arbitration rules is to create the possibility for the parties to a dispute to agree on a simplified and streamlined procedure and to have an arbitration award issued within a short period. The associated cost savings for the parties is another benefit. The importance of developing rules for expedited dispute resolution has recently also been considered by the UNCITRAL Working Group II, in light of the "increasing demand to resolve simple, low-value cases by arbitration" and "the lack of international mechanisms cope with such disputes." As a result, the UNCITRAL 2021 Expedited Arbitration Rules (UNCITRAL EAR) took effect on September 19, 2021. The EAR was adopted by the Commission on 21 July 2021 and, next to UNCITRAL's well-known instruments like the Arbitration Rules (UAR) and the Model Law, represent another chapter in the Commission's impactful work in the field of international arbitration. Overall, the UNCITRAL EAR has great potential to meet the need for more flexible and efficient arbitration proceedings, primarily because they provide the tribunal with strong managerial powers while still leaving room for consultation with the parties. However, parties must remember that not all disputes may be suitable for expedited arbitration, and disputes that are complex or have the possibility of being joint or consolidated may not benefit from simplified procedures and tight deadlines. This article will outline the core features and characteristics of the UNCITRAL EAR.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.5
• /
• pp.43-48
• /
• 2022

With the recent performance improvement of mobile devices as well as the emergence of various applications, not only interactive tasks but also real-time tasks are rapidly increasing. As real-time tasks have deadline requirements, resource management policies used in the conventional time-sharing systems have limitations in satisfying real-time constraints. In this paper, we examine how to efficiently manage resources while satisfying the constraints of real-time tasks through end-to-end resource management of CPU, memory, and storage when interactive and real-time tasks are executed concurrently on a mobile device. Instead of suggesting complicated resource management policies, we focus on examining the basic concepts necessary for each resource management. Specifically, we first look at basic policies such as assigning dedicated CPU cores for real-time tasks, allocating a certain working set of real-time tasks in memory, and using fast storage without context switch in I/O. We then consider how these basic policies can be adopted efficiently.