• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.427-432
• /
• 2005

This study treats the advantage of in situ line source method measuring the heat transfer capacity of a borehole, using mobile equipment, to determine the thermal properties of the entire borehole system such as thermal conductivity, diffusiveity. volumetric heat capacity, and borehole thermal resistance. The results from the response test include not only the thermal properties of the ground and the borehole, but also conditions that are difficult to estimate, e,g. natural convection in the boreholes, asymmetry in the construction, etc. In this study, 1) theoretical in situ methods for assessing working fluid temperature variation in V-type PE tube have been introduced, and 2) TRTE(Thermal Response Test Equipment) has been built based on these kinds of theoretical in situ methods. Basically TRTE consists of a pump, a heater and temperature sensors for measuring the inlet and outlet temperatures of the borehole. In order to make equipment easily transportable it is set up on a small trailer. Since the response test takes above two days to execute, the test was fully automatic in recording measured data using Labview DAS(Data acquisition system) program. The test was demonstrated in the course of intensive research in this field through the one site at Ulsan city in Korea. From this kind of thermal properties test of borehole systems in situ, the design of the borehole system can be optimized regarding the total geological, hydro-geological and technical conditions at the location.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.59-63
• /
• 2005

The 800-kW PM (permanent magnet) synchronous generator is developed as a wind power generator. The matching converter is designed to control the torque and power depending on the wind speed regime. The generator starts to generate the power at the speed of 9 rpm and the rated output is generated at the speed of 25 rpm. The rated output power of an inverter is 750 kW when the PM synchronous generator is delivering 800 kW to the inverter. The inverter is specially designed to perform the maximum power point tracking (MPPT) at the low wind speed regime that is typical wind environment in Korea. The inverter test was done with a 2 MW M-G system at KERI (Korea Electric Research Institute). The M-G set has a 2 MW motor driver and a 38:1 gear to match the speed between the motor and the PM generator. The torque simulating the wind is applied to the PM generator by a DC motor. The test results show the inverter efficiency of $94.3\%$ at the rated power generating condition. The measured values show that the MPPT algorithm is working well. Overall reliability will be verified through the long-term site test.

• Korean Journal of Organic Agriculture
• /
• v.9 no.1
• /
• pp.1-16
• /
• 2001

With increasing global concern that intensively synthetic-chemical based farming systems accelerated the decline in environmental quality, the sustainability of modem agriculture became the subject of great concern. It is well known that the movement of Community Supported Agriculture(CSA) has been contributed significantly to the development of organic agriculture in USA and Japan. It was supposed that CSA could be one of the best way to promote the movement of organic agriculture since there is little reliability on the organically grown food by consumer. In this paper it was focussed to study the movement of CSA in USA and Europe in order to provide an idea for establishment and movement of CSA in Korea to support the organic agriculture. In a CSA system, the farmer grows food for a group of shareholders who pledge to buy a portion of the farm's crop that season. This arrangement gives growers up-front cash to finance their operation and higher prices for produce, since the middleman has been eliminated. For most shareholder for CSA saving money is a secondary consideration, but fresh safe products and environmentally sound farming system. People become shareholder of CSA since they expect an organic farming which can ; \circled1protect the environment, minimize pollution, promote health, \circled2replenish and maintain long-term soil fertility by providing optimal conditions for soil biological activity, \circled3maintain diversity within the farming system and its surroundings and protect plant and wildlife habit, \circled4recycle materials and resources to the greatest extent possible within the farm and its surrounding community, \circled5maintain the integrity of organic food and processed products through each step of the process from planting to consumption, \circled6develop and adopt new technologies with consideration for their long range social and ecological impact. In all CSAs, the farmer develops a crop plan and a budget, which details costs for a growing season, including fair wages for the farmers. Experienced Information on increasing shareholder retention, the future of CSA, and getting started such as ideas for ongoing marketing, printed materials that set realistic expectations, working members, production, pick-up and delivery, setting prices, and receiving feedback were also briefly introduced.

• Parasites, Hosts and Diseases
• /
• v.48 no.1
• /
• pp.43-48
• /
• 2010

Cryptosporidium and Giardia are 2 protozoan parasites responsible for waterborne diseases outbreaks worldwide. In order to assess the prevalence of these protozoans in drinking water samples in the northern part of Portugal and the risk of human infection, we have established a long term program aiming at pinpointing the sources of surface water, drinking water, and environmental contamination, working with the water-supply industry. Total 43 sources of drinking water samples were selected, and a total of 167 samples were analyzed using the Method 1623. Sensitivity assays regarding the genetic characterization by PCR and sequencing of the genes, 18S SSU rRNA, for Cryptosporidium spp. and $\beta$, -giardin for G. duodenalis were set in the laboratory. According to the defined criteria, molecular analysis was performed over 4 samples. Environmental stages of the protozoa were detected in 25.7% (43 out of 167) of the water samples, 8.4% (14 out of 167) with cysts of Giardia, 10.2% (17 out of 167) with oocysts of Cryptosporidium and 7.2% (12 out of 167) for both species. The mean concentrations were 0.1-12.7 oocysts of Cryptosporidium spp. per 10 L and 0.1-108.3 cysts of Giardia duodenalis per 10 L. Our results suggest that the efficiency in drinking water plants must be ameliorated in their efficiency in reducing the levels of contamination. We suggest the implementation of systematic monitoring programs for both protozoa. To authors' knowledge, this is the first report evaluating the concentration of environmental stages of Cryptosporidium and Giardia in drinking water samples in the northern part of Portugal.

• Journal of the Ergonomics Society of Korea
• /
• v.23 no.3
• /
• pp.121-134
• /
• 2004

A research project was conducted to study work-related musculoskeletal disorders （MSDs） at subway train repair plant in Korea. The project was consisted of 4 main parts; education on the topics of MSDs for all workers, symptom survey, medical check-up, investigation of MSD risk factors. The result of symptom survey showed that 95.2％ of the respondents complained pains on at least one part of the body. After cross-sectional analysis of various information and risk factors, 86.8％ of respondents were considered as active health surveillance level 1 that require continuous monitoring on their symptoms and working conditions. And 57.1％ of the respondents were considered as active health surveillance level 2 that needed medical check-ups for proper medical treatment. The analysis of occupational risk factors revealed that handling of heavy object (46.15％) and repeated awkward postures (46.15％) were two most contributing risk factors for the on-set of MSD at this work site followed by static strain (7.7％), and vibration and impact (3.8％). Medical examination was performed by an industrial medicine MD on 156 workers those considered as active health surveillance level 2. The result showed that 35 workers (20.7％) were considered as MSD patient group at severe level, and 68.6 workers (68.6％) were considered as moderate group and 18 workers (10.6％) were considered minor or normal group those have no symptom.

• The Journal of the Korea Contents Association
• /
• v.11 no.7
• /
• pp.374-386
• /
• 2011

This study investigated the impact of leader's coaching on job satisfaction and job involvement. In particular, this study examined employees' self-efficacy as a mediator in the relationship between leader's coaching and job satisfaction and job involvement. On the basis of theoretical linkages between the constructs, a conceptual model and hypotheses were established. Empirical data were collected by using a set of questionnaires. This survey was administered to employees working in 20 firms. 269 samples were used for the analysis. This study conducted a exploratory factor analysis and confirmatory factor analysis for the validity test, structural equation modeling(SEM) was employed to test the hypothesized relationships in the conceptual model. This study shows that the proposed model is reasonably fit to the actual data. From these analyses, the following results were obtained. First, leader's coaching is positively related to employees' self-efficacy. Second, leader's coaching is positively related to job satisfaction and job involvement. Third, employees' self-efficacy has partially mediated effects on the relationship between leader's coaching and job satisfaction and job involvement.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.12
• /
• pp.230-238
• /
• 1999

This paper describes a research work of developing computer-aided design of lead frame, semiconductor, with blanking operation which is very precise for progressive working. Approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. This system has been written in AutoLISP on the AutoCAD using a personal computer and in I-DEAS Drafting Programming Language on the I-DEAS Master Series Drafting with Workstation, HP9000/715(64) and tool kit on the ESPRIT. Transference of data among AutoCAD, I-DEAS Master Series Drafting, and ESPRIT is accomplished by DXF(drawing exchange format) and IGES(initial graphics exchange specification) methods. This system is composed of six modules, which are input and shape treatment, production feasibility check, strip-layout, die-layout, modelling, and post-processor modules. The system can design process planning and Die design considering several factors and generate NC data automatically according to drawings of die-layout module. As forming process of high precision product and die design system using 2-D geometry recognition are integrated with technology of process planning, die design, and CAE analysis, standardization of die part in die design and process planning of high pression product for semiconductor lead frame is possible to set. Results carried out in each module will provide efficiencies to the designer and the manufacturer of lead frame, semiconductor.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.4
• /
• pp.15-28
• /
• 2011

This study will focus on research and analysis covering the period of time since the creation of the People's Republic of China to current day China, with an emphasis on 20-something year-old women living in Shanghai. In conducting this research, historical evidence of fashion was derived from books, photographs, and Internet resources pertaining to the specific periods of interest. Furthermore, each set of data has been organized in approximately decade-long segments that best reflect the transformation of Chinese fashion from 1949 to 2000. As a result of the countrywide emphasis placed on revitalization of the newly created Chinese state during the period of 1949 to 1965, detail to fashion was largely ignored, in preference to the successful upstart of a working economic foundation. This neglect of fashion is evident by the scarcity of new and daring styles during this period. The following the period of 1966 to 1977 ushered in a cultural revolution that was aptly demonstrated in the changing fashion tastes. When compared with the previous period, the blandness of clothing, authorized by the Chinese government clearly reflected the rules and regulations strictly enforced by a government mandate of conformity and obedience. These orthodox changes were so drastic, that women wearing these clothes could hardly be differentiated from men in the same style wear. After Mao Ze Dong's death in 1976 and the end of the sternest period of the Chinese Revolution, a new era of Chinese culture and fashion was made possible by a more lax and tolerant government. During the later palt of the seventies through the eighties, this new governmental policy fostered more openness and self-expression, both of which led to a newfound interest in expressing one's desires and personality through the clothes he or she chose to wear.

• Ocean and Polar Research
• /
• v.38 no.3
• /
• pp.225-234
• /
• 2016

This project sought to conduct an economic feasibility study regarding the commercial production of bio-hydrogen by the marine hyperthermophilic archaeon, Thermococcus onnurineus NA1 using carbon monoxide-containing industrial off-gas. We carried out the economic evaluation of the bio-hydrogen production process using the raw material of steel mill by-product gas. The process parameter was as follows: $H_2$ production rate was 5.6 L/L/h; the conversion of carbon monoxide was 60.7%. This project established an evaluation criterion for about 10,000 tonne/year. Inflation factors were considered as 3%. The operating costs were recalculated based on prices in 2014. The total investment required for development was covered 30% by capital and 70% by a loan. The operation cost for the 0.5-year test and integration, and the cost for the first three months in the 50% production period were considered as the working capital in the cost estimation. The costs required for the rental of office space, facilities, and other related costs from the construction through to full-scale production periods were considered as continuing expenses. Materials, energy, waste disposal and other charges were considered as the operating cost of the development system. Depreciation, tax, maintenance and repair, insurance, labor, interest rate charges, general and administrative costs, lubrication and miscellaneous expenses were also calculated. The hydrogen price was set at US$ 4.15/kg for the economic evaluation. As a result, the process was considered to be economical with the payback period of 6.3 years, NPV of 18 billion Won and IRR of 26.7%.

• The Journal of the Korea Contents Association
• /
• v.14 no.11
• /
• pp.849-857
• /
• 2014

Occupational Stress is defined the stress which occurs in the workplace or organization. In Korean workers, the rate of occupational stress was 87.8% which was the highest level among OECD countries(average 80.0%). The purpose of this study was to examine the empirical verification of the Korean Occupational Stress Scale(KOSS) in physical therapists. For this purpose, the subject of this study was set up physical therapists who were working at Gyeonggi province and collected from 388 persons by using purposive sampling. The collected data was conducted explanatory factor analysis and confirmatory factor analysis in order to ascertain factor structure and practical verification of KOSS. Major results were as following: first, the reliability of KOSS was 0.83, and it means that a measure of internal consistency is high. Second, the KOSS result of physical therapists was composed 7 subscales(job demand, insufficient job control, job insecurity, interpersonal conflict, occupational system and lack of reward, organizational climate) and that is more appropriate measurement scale than the original one by using explanatory/confirmatory factor analysis. This study could be contributed as a tool for evaluation and outcome of the basic information of related occupational stress in physical therapists.