• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.2
• /
• pp.137-146
• /
• 1998

The experimental study is concerned with two-phase closed thermosyphons, (i.e., wickless heat pipes) for the cooling of high power electronic components in telecommunication system. The thermosyphon which can deal with a high heat flux of up to $4.9W/cm^2$ is developed, and the cooling characteristics of thermosyphon is analyzed according to design parameters which are the types of and quantity of working fluid, number of pipes, wire insertion in pipe, inclination angle of thermosyphon, and cooling air velocity. Using water as working fluid is superior cooling performance compared to using acetone, and cooling performance is improved as the number of thermosyphon becomes larger, inserting wires in the pipes, and inclination of $30~60^{\circ}$.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.2
• /
• pp.1-8
• /
• 2009

While the operator's working environment employs the digital devices and technology which are not be fully digitalized due to its technical constraints, it has been changed to the hybrid environment in which digital and analog elements are combined. The hybrid environments need to study its characteristics and the guidelines for the proper design and evaluation purpose. This paper describes the characteristics and evaluation guidelines for hybrid environment through studying the characteristics of digital and analog environment based on the related human factor guidelines and literatures. The result of this paper would be applied for the human machine system such as main control room in nuclear power plant working under hybrid environment. And also, it may be applied for the evaluation of the generic human working environment which digital and analog elements are jointly used.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.06b
• /
• pp.28-42
• /
• 1998

Spinning is one of the incremental forming process by the rotating mandrel and forming roller, and has been applied to manufacturing the wheel disc of automobile to simplify the manufacturing process and to improve the mechanical properties of product. In the proesent study the process variables have been extracted and considered to decide the specification of the spinning machine. The maximum values of working load and power have been evaluated and the blank size has been disigned. The shape and dimensionof forming roller have been designed and the process condition such a s rotational velocity of mandrel and the feedrate of roller have been decided.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.5
• /
• pp.483-489
• /
• 2018

Recently proposed organic flash cycle (OFC) was shown to potentially improve power generation using low grade heat source. In this paper, a thermodynamic performance is carried out for a modified OFC employed double expansions. Effects of the selection of working fluid and the important system parameters such as the temperatures in flash evaporators on the system performance were extensively investigated. Results showed that the system performances are strongly influenced with the system parameters and selection of the working fluid, and the power generation can be increased compared to the basic OFC.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.575-580
• /
• 2004

The latest equipment automatic Intelligence of digital base done large size equipment appear in succession. That run by voltage electric current(mA, mV, ${\mu}A,\;{\mu}V$) that outline is microscopic of action of accuracy large size equipment of this digital base is bulk. Have received influence that is great in river electric field by installment that use computer. Most of domestic working voltage from service entrance extra-high voltage and working voltage of commercial frequency 60Hz working voltage 220V that use our country outside 1 country in interior of 22.900V for semiconductor use computer use digital installment of appliance as well as various smalls of digital base, middle, large size that safety is these fine voltage electric current that is not enough direct admonition hundred vast damage give can. Also, already act in surge circle and impulse transient phenomena such as several thousands, myriads, strong bit error more than billions time to digital fine electronic circuit by mistake use of using electric facility system of system electric power.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.598-602
• /
• 1998

This paper refers to fundamental investigations and simulations of conducted electromagnetic inference emissions produced by power electronic devices in a frequency range from 2 to 10 kHz. The emissions of different industrial power converters were measured and compared. The influence of different working conditions over the altitude of the EMI are represented. Simulations of the power converter system including the line impedance stabilisation network certify the measurements.

• New & Renewable Energy
• /
• v.10 no.4
• /
• pp.36-46
• /
• 2014

Low-grade heats are wasted even though an amount of their energy is huge. In the small and medium industrial complex sites, large amount of low-grade thermal energy generated during the manufacturing process is wasted if it is not used directly for building heating or air-conditioning. In order to utilize this waste thermal energy more efficiently, organic Rankine cycle (ORC) was adopted. The range of operating temperature of ORC was set to $60^{\circ}C$ from $30^{\circ}C$ applicable low-temperature waste heat. A study was conducted to select an appropriate organic working fluid based on these operating conditions. More than 60 working fluids were screened. Eleven working fluids were selected based on the requirements as working fluid for ORC such as environmentally friendly, safety, and good operation on the expander. Finally, six working fluids were selected by considering the operating temperature ranges. Then, a cycle analysis was conducted with these six working fluids. As a results, R-245fa and R-134a appeared as appropriate working fluids for ORC operating at low-temperature condition based on the system efficiency and the turbine output power.

• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.26-31
• /
• 1989

Optical working machines are developed. the machines are to be used in the preparation of Nd-phosphate glass amplifier rod and elliptical disk amplifier plate of the high power Nd-YLF-phosphate glass laser amplifier system. In this report, the working principles of the machines are presented, and several results are shown by photographes, design drawing and the disks actually fabricated by using the machines.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.865-870
• /
• 1998

We propose a multifunctional power line compensator (PLC) which can individually compensate multiple impediments at the same time. The PLC has the flexibility to share power to each compensation according to commands, this improving the working rate. We constructed a 100kVA PLC model including a controller with digital signal processor (DSP) to realize a multifunctional compensation were obtained.

• Journal of Family Resource Management and Policy Review
• /
• v.19 no.2
• /
• pp.101-125
• /
• 2015

Dual-income family is becoming more common in today's society. This study will look at how dual-income households balance between work and life. Specifically, it will study how the families allocate time for work, where they use labor power, and for domestic work and leisure, where they recharge labor power. The data source for this study was the 2009 Korean Time Use Survey. The main results of this research are as follow: The study confirmed that many husbands and wives they still spend much time working. There are differences to spend in restoring labor power; many husbands spend leisure time and many wives spend household labor. Generally in a typical dual-income household, the husband works and enjoys leisure and the wife focuses on working. It was found that the husband and wife in a dual-income family feel time deficient is due to long working hours.