• 간호행정학회지
• /
• 제9권1호
• /
• pp.63-73
• /
• 2003

Purpose : The purpose of this study is to analyze the comparison of organizational climate and job satisfaction of nurses between a secondary hospital and a tertiary hospital. Method : The subjects of this study were 50 nurses who were working in a secondary hospital and 50 working in a tertiary hospital. The data was collected by self-reporting questionnaires. The data were analysed using frequency, percentage, mean, standard deviation, t-test, ANOVA, Pearson's correlation coefficient, regression analysis. Result : 1) There was no statistical significance of the difference of organizational climate between a secondary hospital and a tertiary hospital. However, there was a statistical significance of the difference of job satisfaction. 2) In the organizational climate, there was a significant difference by income in a secondary hospital, and by position in a tertiary center. 3) In the job satisfaction, there was significant differences by age, marriage, position, and duration of working in a secondary hospital, otherwise. there was no significant difference in a tertiary hospital. 4) There was significant positive correlation between organizational climate and job satisfaction. Organizational climate significantly affected job satisfaction. Conclusion : It is suggested that the nursing organizational effectiveness program should be developed with reflecting on organizational characteristics that the nurses perceived.

• Imaging Science in Dentistry
• /
• 제50권3호
• /
• pp.183-192
• /
• 2020

Purpose: This study was performed to assess the accuracy of preoperative cone-beam computed tomography (CBCT), when justified for other reasons, in locating the apical foramen and establishing the working length. Materials and Methods: Six electronic databases were searched for studies on this subject. All studies, of any type, were included if they compared measurements of working length with preoperative CBCT to measurements using an electronic apex locator (EAL) or histological reference standard. Due to the high levels of heterogeneity, an inverse-variance random-effects model was chosen, and weighted mean differences were obtained with 95% confidence intervals and P values. Results: Nine studies were included. Compared to a histological reference standard, CBCT indicated that the apical foramen was on average 0.40 mm coronal of its histological position, with a mean absolute difference of 0.48 mm. Comparisons were also performed to an EAL reference standard, but the conclusions could not be considered robust due to high levels of heterogeneity in the results. Conclusion: A low level of evidence is produced suggesting that preoperative CBCT shows the apical foramen to be on average 0.40 mm coronal to its histological position, with a mean absolute difference of 0.48 mm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권10호
• /
• pp.5014-5034
• /
• 2016

This paper discusses how to effectively guarantee the coverage and connectivity quality of wireless sensor networks when joint perception model is used for the nodes whose communication ranges are multi-level adjustable in the absence of position information. A Connect Coverage Algorithm Based on Joint Sensing model (CCAJS) is proposed, with which least working nodes are chosen based on probability model ensuring the coverage quality of the network. The algorithm can balance the position distribution of selected working nodes as far as possible, as well as reduce the overall energy consumption of the whole network. The simulation results show that, less working nodes are needed to ensure the coverage quality of networks using joint perception model than using the binary perception model. CCAJS can not only satisfy expected coverage quality and connectivity, but also decrease the energy consumption, thereby prolonging the network lifetime.

• 산업공학
• /
• 제18권3호
• /
• pp.288-296
• /
• 2005

Many jobs and activities in our daily lives require squatting postures. The fore part includes housekeepers, farmers, and welders and the latter includes a wide variety of activities such as housekeeping; planting, cultivating and harvesting various agricultural products; grinding, welding, etc. It is speculated that prolonged squatting postures without any supporting stool would gradually cause musculoskeletal injuries to workers. This study is conducted to examine the proper height of stools according to the position of the working materials and to develop wearable stools for workers with squatting posture. Forty male and female subjects participated in the experiment to find the proper height of stools according to the position of the working materials. Subjects were asked to squat and work with 3 different working positions: floor level; ankle level; shank level of 3 different stool height conditions: 10cm height; 15cm height; and 20cm height. After 5 minutes of maintaining a squatting work posture while sitting on the different height stools, Likert summated rating method as well as pairwise ranking test was applied to evaluate the user preferences for provided stools under the conditions of different working positions. The results of statistical analysis show that the subjects preferred 10cm height stool for floor level, 15cm height stool for ankle level, 20cm height stool for knee level. We thus strongly recommend to use appropriate height stools in accordance with the different working positions. Moreover, a prototype wearable stool was designed such that workers with squatting posture do not need to move the stool while they are moving about. The purpose of developing wearable stool was to decrease the physical stress and hence promote worker's health who work with squatting posture.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권1호
• /
• pp.71-80
• /
• 2009

The response characteristics of EHA systems are sensitive to the temperature change of working fluid because the temperature of working fluid causes the variation of system parameters such as effective bulk modulus and viscous friction coefficient. In this paper, a precise position control of EHA system using the adaptive sliding mode control system is suggested. The adapted system parameters such as effective bulk modulus and viscous friction coefficient can be used for monitoring failures in the EHA system which has potential applications in the industrial fields. Not only the accuracy of adapted system parameters but also the improved performance and robustness in a given reference position of the cylinder are verified by computer simulation using AMESim software.

• Journal of Advanced Marine Engineering and Technology
• /
• 제8권1호
• /
• pp.4-16
• /
• 1984

The heat-pipe is characterised by the highly effective thermal conductance. In order to change the thermal conductance, the heat-pipe is connected to a reservior having a space which is filled with non-condensable gas. In normal operation, the vapour of working fluid will tend to pump the non- condensable gas into the reservoir and the gas-vapour interface situates at some point along the condenser section. The thermal conductance is affected by non- condensable gas. It is concluded that the suitable position of interface can be used to control the temperature of condenser section. In this experiment, the evaporating part is connected to the lowest position of heat-pipe. The copper heat-pipe which is filled with Freon-113 or distilled water as working fluid utilized. As results of experimental study, thermal conductance can be increased by the operating pressure which is infulenced by non-condensable gas. A correlative equation between the thermal conductance and the mass of non- condensable gas is also obtained.

• 한국생산제조학회지
• /
• 제7권6호
• /
• pp.49-56
• /
• 1998

Super precision working technique and machine tool have been continually developed thanks to advanced electronic field. To obtain good result. it is necessary to investigate surface in grinding with $mu extrm{m}$ level. There were quite many researches to satisfy these demands by using non-contact methods through the computer vision. In this study, the texture of working surface was analyzed. co-occurrence matrices was obtained from the surface roughness. Texture parameter was obtained using position operator composed of $ heta$, d according to variation of angle direction and distance. As a result, it was found that surface texture was more affected by direction($\theta$) than distance(d).

• 한국의류학회지
• /
• 제21권2호
• /
• pp.455-470
• /
• 1997

The importance of uniform is getting increased in the present society because it is one of symbols which represent a company and give customers the image of it. Uniform shows the kind of companies, one's position, and sometimes the actual job which one does. And workers who put on the same kind of uniform feel companionship among them, the security of their position and responsibility for their job, all of which elevate the efficiency of their job and the company. To enhance the functions of uniforms such as representativeness, esthetics, convenience and economization, the followings were studied. 1) Through survey on the present condition of seven different types of company uniforms, we analyzed preference of workers, staffs and consumers and did the factor analysis of uniform constitution. 2) It presented the relative importance among the uniform constitution. 3) The reflective condition of the uniform constitution was estimated. 4) It investigated the working condition and working movement.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.316-322
• /
• 1998

Super precision working technique and machine tool have been developing continually thanks to advanced electronic field. To obtain good result. it is necessary to investigate surface state in grinding with ${\mu}{\textrm}{m}$ level. There were so many researches to satisfy these demands using non-contact methods through the computer vision. In this study, the texture of working surface was analyzed. cooccurrence matrice was obtained from the surface roughness. Texture parameter was obtained by means of position operator compose of $\theta$. d according to variation of angle direction and distance. As a result, it was found that surface texture was more effected by direction ($\theta$) then distance(d).

• 대한산업공학회지
• /
• 제26권2호
• /
• pp.88-94
• /
• 2000

For efficient operation, vital hand controls must be easily controlled by the operator from his or her normal working position. The primary working area based on the operator-perceived working comfort was developed to serve as a design guideline to the control panel layout. Six male and four female subjects voluntarily participated in the experiment in which working comfort was measured for two types of controls - knob and lever. The operator-perceived working comfort was examined for the frontal and sagittal distances from the body center and the slope of a work surface. The response surface methodology using a central composite design was employed to develop a prediction model for operator's working comfort on each type of controls. The proposed working areas based on the actual working comfort of an operator avoided the dichotomy that considers only the reachability of control devices, and showed a distinct shape, when compared to the existing normal working areas following the Farley's concept. It was shown that the distance from the body to control devices and the slope of a work surface have a quadratic relationship to the working comfort, and that the most comfortable area for seated tasks is located at the distance of about 2∼4 cm in the sagittal direction and about 42∼43 cm in the frontal direction from the shoulder, respectively. It was also found that the working comfort varies within the working area even at the positions with an equal distance from the body. It is expected that the isocomfort working area generated in the study will be used as a useful guideline for control panel layout.