• Journal of the Korean Solar Energy Society
• /
• v.21 no.4
• /
• pp.37-46
• /
• 2001

This study describes the experimental study that focuses on the effects that distributor shapes and flow rate variations have an influence on the stratification in a rectangular thermal storage tank. Experiments were carried out under the conditions that the flow rates of working fluid are 20, 10 and $5\ell$/min. The storage tank is initially filled with chilled water of $1^{\circ}C$, and is extracted through the bottom at the same rate as the return warm water from load is entered through the distributor at the top of the tank. The thermo-cline forms at the top of the storage tank as the warm water enters the tank from the load through the distributor and the thermo-cline thickness increases with time. Emphasis is given to the effects of mixing at the inlet that increases the thermo-cline decay Flow rate variation and inlet distributor shapes are the important parameters in deciding the performance of a storage system. Stratification degree increases with decreasing in inlet flow rate under $10\ell$/min. Experiments shows that better thermal stratification can be obtain using the distributor to limit momentum mixing at the inlets and outlets. Also, 12% of improvement in the thermal energy usage has been achieved using the modified distributor discharging same flow rate in each lateral ports.

• Journal of Korean Physical Therapy Science
• /
• v.16 no.3
• /
• pp.11-17
• /
• 2009

Background: The purpose of this study was designed to find out the effectiveness of reposition sense, muscle fatigue response on lumbar spine after apply lumbosacral stabilization exercise program to 4 patients with chronic low back pain and for 12 weeks. Method: In this study the reposition sense was measured in 3 angle(60, 30, 12) of the lumbar spine motion with blind by MedX test machine and the difference of instability to lumbar vertebra segments in flexion, extension test of standing position and spinal load test Mattress Test by Spinal Mouse. The stabilization exercise program was applied 2 times a week for 12 weeks in hospital and 2 times a day for 20 minutes at home. Result: The results of the present study were that the repositioning sense was appeared the most error in 12 angles of lumbar flexion and Men was appeared to decrease an error more than female in average value of 4 angles after 12 weeks. And average error of male was decrease more than female. Thus the effects of lumbosacral stabilization exercise was improved repositioning sense of prorioceptor. Fatigue response test(FRT) results, in male, was raised muscle fatigue rate during increase weight, on the other hand female appeared lower than male. Conclusion: As a results, lumbosacral stabilization exercise was aided to improvement of lumbar spine repositioning sense and vertebra segments stabilization. It was showed the rate of decrease in typically 12 degree angle point of each 3 angle(60, 36, 12). Especially, that spine instability patients will have a risk when in lifting a load or working with slight flexion posture around 12 degree during the daily of living life and it is probably to increase recurrence rate. Thus, not only lumbar extension muscle strength but also stability of vertebra segments in lumbar spine may be very important.

• Journal of Korean Society of Transportation
• /
• v.24 no.7 s.93
• /
• pp.129-138
• /
• 2006

After Seoul has introduced semi-public bus management system(public management-private operation), the Seoul Metro Government needs a scientific management tool for optimal scheduling for bus routes, to reduce unnecessary operations and provide demand responsive service. As a product of this effort, this paper proposes a heuristic model that could minimize total passenger waiting time under the constraints, such as number of vehicles, working conditions, max load point, minimax headway. etc. For verifying the validity of the proposed model, it is applied to an existing bus route. It results that headways in rush hours become decreased and the passenger waiting time could be decreased. In conclusion. it is thought that the Proposed model contributes to efficiency of bus operation.

• Journal of computational fluids engineering
• /
• v.21 no.1
• /
• pp.50-57
• /
• 2016

In various industries related with construction and military machinery, a large amount of power is normally required because such machinery operations, such as digging or breaking, take place under difficult working conditions in a rough environment. Thus, a hydraulic system needs to be applied as the major power transfer system. To produce and supply hydraulic power depending on the various load conditions, a hydraulic piston pump is utilized as a typical power source for a hydraulic system. In the present study, numerical simulations were conducted using the commercial program, Ansys CFX 14.5. To lubricate the moving parts as the pump starts to operate, a small amount of oil leaks out through the clearance between the orifice in the piston-shoe and the recess at the swash-plate. Taking this into consideration, a cylindrically shaped computational domain was modeled to maintain the same equivalent leakage area. To validate the numerical method applied herein, the numerical results of the flow rate at the discharge port were compared with the experimental data, and a good agreement between them was shown. Using the verified method, the effects of the discharge pressure and the angle of the swash-plate were also evaluated under several load conditions. The results of the present study can be useful information for a hydraulic piston pump used in many different manufacturing industries.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.2
• /
• pp.61-69
• /
• 2020

As post-harvest processes of onions are carried by a 20 kg-net package which results in high-cost and low-efficiency, especially, the insufficient drying and physical damage of onions after harvesting leads to a huge second loss in storage, we had developed a low-cost, high-efficiency post-harvest bulk handling machinery system by collecting onions on a farm using ton-bags, drying with forced air circulation, and sorting/packaging. The post-harvest bulk handling machinery system consisted of 6 devices, and this study designed an automatic feed hopper with a feeding rate control device, an inclined belt conveyor with a two-step chute, and an automatic pallet unloading device for feeding onions into the sorting/packing line. This study also analyzed the performance and control of the total system. The device had 1-ton handling capacity, but the operational condition was set to increase the capacity. The three-step filling method of pallet by the velocity control of the inclined belt conveyor was applied in the post-harvest bulk handling machinery system for the prevention of physical damage. If one worker was set to operate the total system, the time required to complete one palletized load was approximately 5 minutes and 5 seconds. The calculated daily handling capacity was approximately 94 tons, when the daily actual working time was 8 hours. When the developed system was applied to the managerial size of 2,000 ton, the processing cost per ton of the system was decreased by 19.5%, compared with the existing 20 kg-net package-based handling. The developed post-harvest bulk handling machinery system would be a good substitute for the rapid decline and aging of rural labor.

• Journal of the Korean Home Economics Association
• /
• v.31 no.3
• /
• pp.15-27
• /
• 1993

The Purpose of this study is to serve as the basic data for the succession of traditional culture. The subjects of this study were (926) mothers and their daughters living in Taegu. The analysis of the data was done through SPSS pc+ programs. The major findings of this study are as follows: 1. Regarding to the degree of the people's participation in Traditional Customs of Four Seasons,“New Year's Day”,“Chusok(Chinese Thanks-giving Day)”,“Sangwon(The 1st Full-Moon Day)”,“boknal”are the occasions of the high participation. Ragarding to the characteristics of the groups participating, mothers' groups (compared with daughters'), the group with the positive concept about the customs(compared with the one with the negative concept), and the buddhist group(compared with other religion) are predominant. 2. Regarding to the degree of women's working lord for the Traditional Customs of Four Seasons, the significant variables on family environment in which the women are situated are family religion, The place of grown-up, Daugthers-in-laws order, and family type. Family type is found as the significant variable of Family environment in the degree of socialization of preparing effort of dishes. 3. Through factor analysis concepts of the Traditional Customs of Four Seasons are classified into 3 type, i.e.,「Conventional customs of good morals」,「Women's role in preparation for dishes」, and「The weights of the related load in women's housework」. 4. The direct factors influencing the women's housework related to Traditional Customs of Four Seasons are「Conventional customs of good morals」,「The weights of the related load in women's housework」and「The satisfaction of Traditional Customs of Four Seasons」. The indirect factor is found as 「Conventional customs of good morals」.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.8
• /
• pp.1195-1202
• /
• 2010

When modelling lots of induction motors to design and configure an engine room simulator, the 2 parameters equivalent circuit has many practical benefits as it reduces working hours considerably without requiring complicated technical data from makers except the ratings of motors. The basic properties such as torque and load current are shown well matched with real cases by this method, but almost the only drawback of 2 parameters circuit is that it reveals inherently higher power factor in the whole operation range due to disregarding the exciting current of the induction motor to maximize the simplification. This paper suggests a modelling module as a practical tool to compensate the power factor by inserting a virtual compensation current into the load current from 2 parameters equivalent circuit, and the simulated results show satisfactory outputs and the improved power factor indication by performance curves when compared to the cases of 2 parameters-equivalent circuit.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.801-804
• /
• 2003

The autopilot system of vessel is proposed to take service safety sorority, to elevate service efficiency, to decrease labor and to improve working environment. Ultimate purpose of it is to minimize the number of crew by guaranteeing economical efficiency of shipping service. Recently, the research is being achieving to compensate various nonlinear parameters of vessel and apply it is course keeping control, track keeping control, roll-rudder stabilization, dynamic ship positioning and automatic mooring control etc. using optimizing control technique. Relation between rudder angle controlled by steering machine of vessel and ship-heading angle, and load condition of ship are nonlinear, which affect various parameters of shipping service. The speed and direction of waves, velocity and quantity of wind, which also cause the non-linearity of it. Therefore the autopilot system of ship requires the robust control algorithm can overcome various non-linearity. On this paper, we design the autopilot system of ship, which overcome nonlinear parameters and disturbance of it using Fuzzy Algorithm, evaluate the proposed algorithm and its excellence through simulation

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.3
• /
• pp.371-382
• /
• 2014

Objectives: This study was undertaken in order to examine how musculoskeletal disorder(MSD) symptoms were affected by particular factors and then to explore control strategies to prevent MSDs in general hospital nurses. Materials: This, as part of a large study, was conducted using a set of information on literature review, questionnaire survey and focus group interview. It obtained prevalence and factors of MSD symptoms and examined how MSD symptoms were distributed and affected by the factors in nurses working at 15 general hospitals across Korea. The factors were personal factors, work organization, nursing tasks, physical factors and psychosocial factors. Results: A total of 501 nurses were determined as subjects. The highest MSD symptom prevalence was 61% for the shoulder, among body parts, followed by leg/feet(55%), low back(51%), neck(42%), wrist(38%), and elbow(21%). Prevalence for the whole body was 80%. Odds ratios ranged from 0.4 to 22.4 in logistic regression analyses. The symptoms were significantly attributed to factor variables such as body mass index, current health status, daily work time, nursing task, pooled-physical factors, ergonomic factors, work load, interpersonal conflict, and job insecurity. Conclusions: Two or more factor variables were significant, depending on body part, for MSD systems in the general hospital nurses. It was noticeable that physical factors, such as pooled-physical factors, ergonomic factors or work load, were selectively significant for MSD symptoms in all body parts, indicating that such information should be used for prevention of MSDs in the hospital sector.

• Journal of the Korean Society of Food Culture
• /
• v.14 no.3
• /
• pp.233-239
• /
• 1999

This study was to investigate the factors which influence foodservice dietitians' job satisfaction and dissatisfaction by the elementary school foodservice type using questionnaires. The results of the study are as followings : 1) Foodservice types of the subjects were urban 49(23.2%), country 141(66.8%) and island 21(10.0%). 79.6% of the urban type were operated by the conventional, independent management system, where 38.3% of the country and 52.4% of the island type were operated by conventional, joint management system. 2) Urban type dietitians showed significantly lower satisfaction on their salary & promotion(1.5) compare to country & island types(p<0.05). Island type dietitians showed significantly lower satisfaction on the student's health improving(2.4) compare to country &urban types(p<0.05). 3) Dietitians of urban type were dissatisfied more 'personnel management(3.2)' than dietitians of other two types. Dietitians of country type and island type were dissatisfied more 'extra work load(2.6)' than dietitians of urban type. 4) Work load was lots orderly island, country and urban types. Working attitudes were the most positive at dietitians of urban type and the most negative at dietitians of island type. 5) Job satisfaction and dissatisfaction of dietitians were correlated with number of meals, number of school transfer, cook license, additional job and school foodservice location type.