• Journal of Biosystems Engineering
• /
• 제37권3호
• /
• pp.155-165
• /
• 2012

This study was performed to offer the data for design of the seedling bed transfer equipment to make the automation of working process in a plant factory. The seedling bed transfer equipment pushing the seedling bed with bearing wheels on the rail for interconnecting each working process by a pneumatic cylinder was made and examined. The examined transfer force to push the seedling bed with a weight of 178.9 N by the pneumatic cylinder with length of 60 cm and section area of 5 $cm^2$ was measured by experiments. The examined transfer forces was compared with theoretical ones calculated by the theoretical formula derived from dynamic system analysis according to the number of the seedling bed and pushing speed of the pneumatic cylinder head at no load. The transfer function of the equipment with the input variable as the pushing speed $V_{h0}$(m/s) and the output variable as the transfer force f(t)(N) was represented as $F(s)=(V_{h0}/k)(s+B/M)/(s(s^2+Bs/M+1/(kM))$ where M(kg), k(m/N) and B(Ns/m) are the mass of the bed, the compression coefficient of the pneumatic cylinder and the dynamic friction coefficient between the seedling bed and the rail, respectively. The examined transfer force curves and the theoretical ones were represented similar wave forms as to use the theoretical formular to design the device for the seedling bed transfer. The condition of no vibration of the transfer force curve was $kB^2>4M$. The condition of transferring the bed by the repeatable impact and vibration force according to difference of transfer distance of the pneumatic cylinder head from that of the bed was as $Ce^{-\frac{3{\pi}D}{2\omega}}<-1$, where ${\omega}=\sqrt{\frac{1}{kM}-\frac{B^2}{4M^2}}$, $C=\{\frac{\frac{B}{2M}-\frac{1}{kB}}{\omega}\}$, $D=\frac{B}{2M}$. The examined mean peak transfer force represented 4 times of the stead state transfer force. Therefore it seemed that the transfer force of the pneumatic cylinder required for design of the push device was 4Bv where v is the pushing speed.

• 한국실내디자인학회논문집
• /
• 제27권2호
• /
• pp.24-36
• /
• 2018

Implementing a home modification to enable elderly's safe and independent living is the key plan to realize their aging in place. South Korea in which had entered an aged society is not yet vitalized in home modification for the elderly compared to that of welfare-developed countries, and South Korea provides support that is limited to the low-income elderly. Therefore, this purpose of this study was to analyze the laws related to the home modification, the present condition of home modification support, the standards and guidelines in home modification, the support in house modification cost, and supporting organization and working force in the home modification. Through the analyzing process, this study examined the current situation and problems of institutional support in the home modification for elderly and the proposed plan for institutional improvement. The suggestions based on the results are as in the following. 1) Home modification support law(act or regulation) is required to be improved 2) Home modification support system correspondent to aging process should be provided regardless of their income levels. 3) Delicate plan standard and guideline are necessary for a process of implementing the home modification for the elderly. 4) Information on life behavior is in need for the implementation of elderly-customized home modification. 5) Cost for the home modification should be considered to cover by the Act on Long-Term Care Insurance for the Aged. 6) Housing Welfare Center and Housing Welfare Professional should be actively utilized for the home modification support institution and work force.

• 패션비즈니스
• /
• 제27권3호
• /
• pp.63-74
• /
• 2023

As "Made in Korea" has high branding power in the fashion industry, domestic clothing manufacturers also need to consider branding the country of origin. Therefore, the purpose of this study was to reconsider the need for a domestic certification system and suggest a direction by analyzing apparel origin certification systems operating overseas. The results of this study could be used for planning certification standards and operating methods suitable for regional characteristics and industrial environments when establishing a certification system for clothing produced in Korea. The case study subjects were Japan's J∞ Quality, USA's Made in New York, Italy's 100% Made in Italy, and France's Origin France Guarantee has been classified as certification criteria related to the country of origin include items related to the production process rate in the region and the production area for each production process/stream. Manufacturing technology and design are used for quality standards, safety, hygiene compliance, production facilities, and quality control and are applied to working environment standards. The certification system selects and operates standards according to each country's industrial environment, certification subject, and purpose. Therefore, when designing a domestic apparel certification system, a feasible promotion plan should be established that considers the current state of the domestic industry, which will serve as a driving force for the growth of the apparel manufacturing industry and an opportunity to increase the trust of global fashion consumers.

• Wind and Structures
• /
• 제26권4호
• /
• pp.191-204
• /
• 2018

This article presents a study of the largest-ever (height = 220 m) cooling tower using the large eddy simulation (LES) method. Information about fluid fields around the tower and 3D aerodynamic time history in full construction process were obtained, and the wind pressure distribution along the entire tower predicted by the developed model was compared with standard curves and measured curves to validate the effectiveness of the simulating method. Based on that, average wind pressure distribution and characteristics of fluid fields in the construction process of ultra-large cooling tower were investigated. The characteristics of fluid fields in full construction process and their working principles were investigated based on wind speeds and vorticities under different construction conditions. Then, time domain characteristics of ultra-large cooling towers in full construction process, including fluctuating wind loads, extreme wind loads, lift and drag coefficients, and relationship of measuring points, were studied and fitting formula of extreme wind load as a function of height was developed based on the nonlinear least square method. Additionally, the frequency domain characteristics of wind loads on the constructing tower, including wind pressure power spectrum at typical measuring points, lift and drag power spectrum, circumferential correlations between typical measuring points, and vertical correlations of lift coefficient and drag coefficient, were analyzed. The results revealed that the random characteristics of fluctuating wind loads, as well as corresponding extreme wind pressure and power spectra curves, varied significantly and in real time with the height of the constructing tower. This study provides references for design of wind loads during construction period of ultra-large cooling towers.

• 한국정밀공학회지
• /
• 제28권10호
• /
• pp.1146-1152
• /
• 2011

Ink transfer process is very important to determine quality of printed pattern, therefore its mechanism should be understood to control printing quality. Although there have been many attempts to understand ink transfer mechanism by numerical simulation and experimental studies, their model was too much simple to model realistic printing process and our understanding is not enough yet. In this paper we designed ink transfer visualization system to present flow visualization of ink transfer process for gravure offset printing. We considered rotational effect of blanket roll which is related with printing speed and used non-Newtonian fluid as working fluid such as Ag paste. For printing unit, cantilever-type blanket roll is used for convenient visualization of ink transfer. Serial images were captured continuously by using high-speed CMOS camera and long range microscope. We investigated the effects of various design parameters such as printing speed and pattern angle on the ink transfer process. We found more stretched ink filament for non-Newtonian fluid than Newtonian fluid. As increasing printing speed, length of stretched ink filament and height of break-up point are also increased. We also compared ink transfer process between CD and MD pattern and its relationship with ink transfer mechanism.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1674-1685
• /
• 2022

The ball valve is an important device in the pipeline transportation system of nuclear power plants. Its operational stability and safety directly affect the normal working of nuclear power plants. In this study, the transient numerical simulation of the opening and closing process of a ball valve was conducted on the basis of the flow interruption capability experiment of the ball valve by using the moving mesh method and inlet and outlet variable boundary conditions. The flow rate and pressure difference with time of the opening and closing process of the ball valve were studied. The internal flow characteristics of the ball valve under different relative openings were analyzed in conjunction with the typical back-step flow structure. Results show that the transient numerical results agree well with the experimental results. The internal flow characteristics of the ball valve are similar at the same opening during opening and closing process. At small opening, the spool and outlet channels easily form a back-step flow structure. The disappearance and generation of backflow vortices during opening and closing occur at 85% opening and 75% opening, respectively. With the decrease in opening degree, the difference in vortex core area in the flow channel of the ball valve spool in the opening and closing process gradually appears. The research results provide some reference value for the design and optimization of ball valves.

• 구강회복응용과학지
• /
• 제40권2호
• /
• pp.72-81
• /
• 2024

목적: 본 연구의 목적은 가철성 다이 시스템으로 제작된 작업 모형과 솔리드 작업 모형을 이용해 치과용 캐드캠 시스템(CAD/CAM)으로 제작된 지르코니아 3본 고정성 치과 보철물의 변연 및 내부 적합성을 평가하고자 하였다. 연구 재료 및 방법: 하악 우측 제1소구치와 하악 우측 제1대구치에 지르코니아 크라운을 위한 치아 삭제 프로토콜을 수행하고, 하악 우측 제2소구치가 없는 레퍼런스 모델을 만들었다. 레퍼런스 모델은 폴리비닐 실록산 인상체를 사용하여 복제되었고, 일반적인 치과 기공 절차에 따라 20개의 작업 모형이 제작되었다. 비교 분석을 위해, 10개의 지르코니아 3본 고정성 치과 보철물은 가철성 다이 시스템에서, 나머지 10개는 솔리드 작업 모형에서 제작되었다. 모든 작업 모형은 치과용 데스크탑 스캐너를 사용하여 디지털화되었고, 캐드 소프트웨어에서 보철물을 설계하였다. 최종 3본 고정성 치과 보철물은 밀링 과정을 통해 제작되었다. 변연 및 내부 적합도 평가는 레퍼런스 모델에 제작된 보철물을 위치시키고, 디지털 평가 방법으로 적합도가 측정되었다. 두 그룹 간의 통계 비교를 위해 Mann-Whitney U 검정이 적용되었다(α = 0.05). 결과: 가철성 다이 그룹은 솔리드 작업 모형 그룹에 비해 소구치와 대구치에서 유의하게 높은 적합도 차이를 보였으며(P < 0.05), 특히 변연 및 교합 간격에서 유의하게 높은 편차를 보였다. 색상 편차 맵에서도 가철성 다이 그룹이 변연 및 교합 영역에서 더욱 높은 편차를 보였다. 결론: 3본 고정성 치과 보철물의 적합도 차이는 가철성 다이 시스템의 작업 모형 상에서 제작된 치과 보철물에서 초래되었으며, 이를 통해 가철성 다이 제작 방법이 치과 고정성 보철물의 정확성에 영향이 있었음을 검증하였다.

• 한국실내디자인학회논문집
• /
• 제23권6호
• /
• pp.51-59
• /
• 2014

Rem Koolhaas has pursued new architectural approaches breaking with conventional ones. Around the 1990s when large-scale projects occurred with the union of Europe ahead, Koolhaas recognized the limits to the existing methods for responding to such changes. Accordingly, he came to use design methods based on 'congestion' and 'void' as strategical alternatives, which became the moment for him to leap forward from the previous working sphere based in Europe to becoming an architect who would be commissioned a number of large-scale global projects. Therefore, this study intends to investigate his design methods which utilized congestion and void, and to derive spatial characteristics from the projects based on such methods. First of all, the study looked into the historical background, definition and process of congestion and the void as design methods, and analyzed his projects to which such methods were applied by classifying them into the following categories: 1) the void that removes a space of singularity; 2) the void that penetrates space while making a flow; and 3) the void that is formed by vertical extrusion. Then, the characteristics of architectural spaces made in this way were identified as 1)the single-body appearance made by congestion and the following types of space made by the void: 2) the non-uniformly shaped space that looks like floating; 3) the flexible space with various flows and directions; and 4) the space with virtual possibilities that embrace contingent events. This understanding of Rem Koolhaas's design methods which were attempted in various ways at his critical turning point will be the foundation to understand the overall world of his works.

• 복식
• /
• 제60권7호
• /
• pp.31-46
• /
• 2010

Fashion industry is faced with issues of raising the competitiveness of established designers recently. As well as the change of business system, the specialization of professionals in design team increases the needs of in-service training of fashion designers. But, the education programs of enterprise are generally focused on adaptability to the organization and harmony among men as an introduction level. Furthermore, there are few professional institutions that give an education to the working-level designers. Thus, this study aimed at development of specialized in-service training program that could educate established designers for more integrated thought to cope with rapid changes in the fashion field. Firstly, the theoretical study on the in-service training and changes of fashion environment had been studied through literature review. Then, the current state of in-service training of fashion enterprises and the courses for established designers in fashion institutions were analysed. Finally, a comprehensive framework of in-service training program for fashion designers has been established as a result of this study. The program was designed in accordance with the previous research which reached 4 different educational needs for in-service training: brand planning and management, understanding production, understanding practical fabrics & colors, computer program. The study went further to apply the program to each design group divided by career: new designer, junior designer, senior designer, design leader. This study also suggested evaluation process to confirm the effects.

• 한국실내디자인학회논문집
• /
• 제27권1호
• /
• pp.140-155
• /
• 2018

In response to the development of IT technology in the 21st century and the advancement of the public human rights consciousness, it has become necessary to continuously evolve the office environments to support the changes of organizational structure and work methods of the police investigation departments. As a facility standard, continuous researches on standardized design space models and guidelines of the police investigation departments are needed. In respond to the organizational changes for the convenience of the working police investigators and the protection of the human rights of the visiting public, the environmental improvement projects for the office of the investigation department of the police stations are going on since 2014. In this study, analyzation and verification of the 3 cases of pilot projects for the improvement of police investigation departments would be done, based on the policy research project in 2014: 'the standard design direction of police officers for the protection of human rights and benefit of police investigation process.' The purpose of this study is, first of all, the actual situation survey for presenting the standard design space model and guidelines of investigation department of the police department. Secondly, the validation of the spatial model adequacy for for the past 3 years' case study of the police investigation department's environmental improvements by the application of standardized design space models and guidelines. The result of this study would be to enable the more effective police department investigation environment improvement policy by presenting the standard design space models and guidelines of the investigation departments of the police facilities.