• Korean Chemical Engineering Research
• /
• v.54 no.5
• /
• pp.653-658
• /
• 2016

Poly(ether-block-amide)(PEBAX$_{(R)}$) resin is a thermoplastic elastomer combining linear chains of hard-rigid polyamide block interspaced soft-flexible polyether block. It was believed that the hard polyamide block provides the mechanical strength and permselectivity, whereas gas transport occurs primarily through the soft polyether block. The objective of this work was to investigate the gas permeation properties of carbon dioxide and methane for PEBAX$^{(R)}$-1657 membrane, and compare with those obtained for other grade of pure PEBAX$^{(R)}$, PEBAX$^{(R)}$-2533 and PEBAX$^{(R)}$ based hybrid membranes. The hybrid membranes based PEBAX$^{(R)}$ were obtained by a sol-gel process using GPTMS ((3-glycidoxypropyl) trimethoxysilane) as the only inorganic precursor. Molecular structure and morphology of membrane were analyzed by $^{29}Si$-NMR, DSC and SEM. PEBAX$_{(R)}$-2533 membrane exhibited higher gas permeability coefficients than PEBAX$^{(R)}$-1657 membrane. This was explained by the increase of chain mobility. In contrast, ideal separation factor of $CO_2/CH_4$ for PEBAX$^{(R)}$-1657 membrane was higher than PEBAX$^{(R)}$-2533 membrane. It was explained by the decrease of diffusion selectivity caused by increase of chain mobility. For PEBAX$^{(R)}$/GPTMS hybrid membrane, gas permeability coefficients were decreased with reaction time. Gas permeability coefficient of $CH_4$ was more significantly decreased than $CO_2$. It can be explained by the reduction of chain mobility caused by the sol-gel process, and strong affinity of PEO segment with $CO_2$. Comparing with pure PEBAX$^{(R)}$-1657 membrane, ideal separation factor of $CO_2/CH_4$ for PEBAX$^{(R)}$/GPTMS hybrid membrane has decreased to 4.5%, and gas permeability coefficient of $CO_2$ has increased 3.5 times.

• Journal of Korean Society of Forest Science
• /
• v.85 no.3
• /
• pp.396-408
• /
• 1996

The purposes of this study were to standardise the forest working system to design the intensity of working system in felling operation of the thinning forest in our country as well as to contrive the improvement of working method and the increase of productivity. For the purpose of investigating these, element working was classified by felling operation in softwood thinning forest, and a pulse rate were measured and analyzed. The results were as follow : 1. From the analysis of the pulse frequence measurment, the average pulse showed 108 pulse per minute for worker A in the total of pure working time, 130 pulse per minutes for worker B, 119 pulse per minute for worker C and 125 pulse per minute for worker D, respectively. 2. From the results of the pulse frequence analysis according to element working classification, the highest pulse frequence represented 115 pulse per minute for worker A in the circumference, 131 pulse per minute for worker B in the movement, 122 pulse per minute for worker C in the limbing operation and 128 pulse per minute for work D in hang-up. 3. If the original pulse frequence was 100% for workers, the working intensity showed as follow : worker A was 160%(original pulse frequence was 61=100%) for the total of the working intensity and 188% for the circumference among element working. Worker B was 220%(original pulse frequence was 57=100%) for the total of the working intensity and 229 for movement among element working. Worker C was 159%(original pulse frequence was 73=100%) for the total of the working intensity and 168% for limbing operation among the element working. Worker D was 156%(original pulse frequence was 70=100%) for the total of working intensity and 182% for hang-up among element working. 4. At the limit point of Labor performance rating, showing the total of working intensity, overtime pulse rate per minute was 30 for worker A, 207 for worker B, 14 for worker C and 67 for worker D. Worker B was highest in working intensity, and got physically a big load.

• Journal of Korean Society of Disaster and Security
• /
• v.9 no.2
• /
• pp.63-75
• /
• 2016

For safe water supply, residual chlorine has to be maintained in tap-water above a certain level from drinking water treatment plants to the final tap-water end-point. However, according to the current literature, approximately 30-60% of residual chlorine is being lost during the whole water supply pathways. The losses of residual chlorine may have been attributed to the current tendency for water supply managers to reduce chlorine dosage in drinking water treatment plants, aqueous phase decomposition of residual chlorine in supply pipes, accelerated chlorine decomposition at a high temperature during summer, leakage or losses of residual chlorine from old water supply pipes, and disappearances of residual chlorine in water storage tanks. Because of these, it is difficult to rule out the possibility that residual chlorine concentrations become lower than a regulatory level. In addition, it is concerned that the regulatory satisfaction of residual chlorine in water storage tanks can not always be guaranteed by using the current design method in which only storage capacity and/or hydraulic retention time are simply used as design factors, without considering other physico-chemical processes involved in chlorine disappearances in water storage tank. To circumvent the limitations of the current design method, mathematical models for aqueous chlorine decomposition, sorption of chlorine into wall surface, and mass-transfer into air-phase via evaporation were selected from literature, and residual chlorine reduction behavior in water storage tanks was numerically simulated. The model simulation revealed that the major factors influencing residual chlorine disappearances in water storage tanks are the water quality (organic pollutant concentration) of tap-water entering into a storage tank, the hydraulic dispersion developed by inflow of tap-water into a water storage tank, and sorption capacity onto the wall of a water storage tank. The findings from his work provide useful information in developing novel design and technology for minimizing residual chlorine disappearances in water storage tanks.

• Clinical and Experimental Reproductive Medicine
• /
• v.23 no.1
• /
• pp.25-32
• /
• 1996

This work has been carried out to examine the number of Total, ICM and TE cells of F1 mouse blastcysts at day 4 after IVF by differential labelling of the nuclei with polynucleotide-specific fluorochromes and to obtain a fundamental information of preimplantation mouse embryo development. Blastocysts produced by superovulated B6CBA F1(C57BL/${\times}$CBA) eggs were inseminated with $1{\times}10^6$spermatozoa/ml and cultured in M16 medium at $37^{\circ}C$, 5% $CO_2$ incubator for 95hrs. Blastocysts were classified as early, middle, expanded and hatching stage according to the developmental morphology; blastocoel expansion and zona thickness. The results obtained in these experiments were summarized as follows; 1) The development rate of blastocysts at 95hrs after IVF was 86.7% and classified blastocysts to early, middle, expanded and hatching were 16.3%, 18.9%, 10.5% and 40.9%, respectively. 2) The numbers of total blastomere using bisbenzimide in the classified blastocysts to early, middle, expanded and hatching were 35.6${\pm}$1O.4, 49.4${\pm}$8.6, 60.8${\pm}$1O.7 and 62.7${\pm}$13.9, respectively. 3) In ICM and TE cell number by using differential labelling with polynucleotide-specific fluorochrome in the classified blastocysts to early, middle, expanded and hatching; ICM numbers were 9.6${\pm}$3.0, 13.6${\pm}$3.9, 16.0${\pm}$3.3 and 19.5${\pm}$4.6, respectively and TE cell numbers were 30.6${\pm}$5.1, 39.9${\pm}$5.8, 42.2${\pm}$8.1 and 43.7${\pm}$11.1, respectively. These results showed the same increase pattern according to development advance level. Also, when compared with the results of total count were obtained between bisbenzimide only and differential labelling, both of them showed the same increase pattern according to development level and at the same time their cell numbers were almost the same. So, rapid and simple cell count method using differential labelling can be used for the examination of later preimplantation development or as an indicator of embryo quality according to the variables of culture conditions.

• Journal of Life Science
• /
• v.16 no.2 s.75
• /
• pp.231-239
• /
• 2006

Human mesenchymal stem cells (hMSCs) in bone marrow (BM) can be induced to differentiate into a variety of mesenchymal tissues, including adipocytes, osteoblasts and chondroblasts, under the influence of certain growth or environmental factors. In this study, we analyzed the differentiation process and the associated gene expression profiles inherent to the process by which hMSCs differentiate into osteoblasts. We conducted a comparison of gene expression profiles of the normal human BM MSCs, using human 8K cDNA microarray, incubated in media containing either a combination of $\beta$-glycerol phosphate, L-ascorbic acid, and dexamethasone, or in medium lacking these osteogenic supplements. During the osteoblastic differentiation process, 36 genes were determined to be up-regulated, and 59 genes were shown to be down-regulated. Osteoprotegerin, LRP5, and metallothionein 2A, all of which are associated with the osteogenetic process, were up-regulated, and genes associated with the differentiation of MSCs into other lineages, including muscle, adipose tissue and vascular structure were down-regulated. The set of differentially expressed genes reported in this work should contribute to our current understanding of the processes inherent to the differentiation of MSCs into osteoblasts.

• Progress in Medical Physics
• /
• v.10 no.2
• /
• pp.63-71
• /
• 1999

For the purpose of utilization in 3-D conformal radiotherapy and whole body radiosurgery, the Whole Body 3-Dimensional Topographic Radiation Therapy System has been developed. Whole body frame was constructed in order to be installed on the couch. Radiopaque catheters were engraved on it for the dedicated coordinate system and a MeV-Green immobilizer was used for the patient setup by the help of side panels and plastic rods. By designing and constructing the whole body frame in this way, geometrical limitation to the gantry rotation in 3-D conformal radiotherapy could be minimized and problem which radiation transmission may be altered in particular incident angles was solved. By analyzing CT images containing information of patient setup with respect to the whole body frame, localization and coordination of the target is performed so that patient setup error may be eliminated between simulation and treatment. For the verification of setup, the change of patient positioning is detected and adjusted in order to minimize the setup error by means of comparison of the body outlines using 3 CCTV cameras. To enhance efficiency of treatment procedure, this work can be done in real time by watching the change of patient setup through the monitor. The method of image subtraction in IDL (Interactive Data Language) was used to visualize the change of patient setup. Rotating X-ray system was constructed for detecting target movement due to internal organ motion. Landmark screws were implanted either on the bones around target or inside target, and variation of target location with respect to markers may be visualized in order to minimize internal setup error through the anterior and the lateral image information taken from rotating X-ray system. For CT simulation, simulation software was developed using IDL on GUI(Graphic User Interface) basis for PC and includes functions of graphic handling, editing and data acquisition of images of internal organs as well as target for the preparation of treatment planning.

• Journal of The Korean Association For Science Education
• /
• v.34 no.5
• /
• pp.437-447
• /
• 2014

Learning progressions (LP), which describe how students may develop more sophisticated understanding over a defined period of time, can inform the design of instructional materials and assessment by providing a coherent, systematic measure of what can be regarded as "level appropriate." We developed LPs for the nature of matter for grades K-16. In order to empirically test Korean students, we revised one of the constructs and associated assessment items based on Korean National Science Standards. The assessment was administered to 124 Korean secondary students to measure their knowledge and submicroscopic representations, and to assign them to a level of learning progression for the particle nature of matter. We characterized the level of students' understanding and models of the particle nature of matter, and described how students interpret various representations of atoms and molecules to explain scientific phenomena. The results revealed that students have difficulties in understanding the relationship between the macroscopic and molecular levels of phenomena, even in high school science. Their difficulties may be attributed to a limited understanding of scientific modeling, a lack of understanding of the models used to represent the particle nature of matter, or limited understanding of the structure of matter. This work will inform assessment and curriculum materials development related to the fundamental relationship between macroscopic, observed phenomena and the behavior of atoms and molecules, and can be used to create individualized learning environments. In addition, the results contribute to scientific research literature on learning progressions on the nature of matter.

• Child Health Nursing Research
• /
• v.20 no.3
• /
• pp.159-167
• /
• 2014

Purpose: The purpose of this study was to investigate factors associated with sexual debut among Korean middle school students. Methods: From the database of the Eighth Korea Youth Risk Behavior Web-based Survey (KYRBS), the researchers selected 37,297 middle school students aged 12-15 years. Data were analyzed using $x^2$ test and multiple logistic regression with the SPSS WIN 18.0 program. Results: The proportion of middle school students who had a sexual debut was 2.1% of boys and 1.5% of girls. In multiple regression analysis, economic status, experience of part time work, smoking, drug use and depression were associated with an increased proportion of sexual intercourse for both boys and girls. Living with parents, drinking alcohol and suicidal ideation were associated with sexual debut for boys only. By contrast, formal sexual education was associated with a reduced risk of sexual debut. Conclusion: The results of this study show the factors associated with sexual debut among Korean middle school students. Gender-related interventions should be taken into consideration in school sexual education programmes, because of differences in related factors according to gender.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.2
• /
• pp.75-94
• /
• 1996

This survey study was aimed at identifying the degree of educational need of the KNOU(Korea National Open University) nursing students defined as admission purposes, satisfaction of distance learning education, learning methods, and courses after graduation. Among randomly assigned 1000 students, 320 KNOU nursing students who allowed to participate in the study completed the questionnaires. The data were analyzed using descriptive statistics, chi-square test, and t-test, Results of this study were as follows : 1. The admission purposes of the KNOU nursing students were 'in order to get a bachelor's degree(83.8%)', 'to acquire knowledge for task(61.3%)', or 'to be admitted for the graduate school (53.1%)' etc. Comparing the admission purposes by age, tow items- 'to explore new possibilities for myself' and 'excellent curriculum' showed statistically significant differences. These two items were also found to show significant differences by marital status. 2. For the media maintenance, the results showed that students use their own cassett radios(96.3%), VTR(49.4%), TV only for the study (44.1%), personal computer (3.31%), or joining Hitel (6.3%). 3. Listening rates of the radio lecture were 'over 80%(9.1%)', '50-80%(9.1%)', '20-50%(18.1%)', 'below 20%(30%)' and 'never(33.1%)', And record lecture showed listening rates as follows : 'over80%(17.2%)', '50-80%(15.9%)', '20-50%(24.4%)', 'below 20%(27,2%)' and 'never(14.4%)'. 4. The difficulties with KNOU life were 'listening radio lectures(38.8%)', studying by following teaching schedules (37.8%)', 'isolated self-study(10.3%)', and 'appearance in the attending classes(8.1%)'. 5. As for satisfaction with teaching methods, the data showed that 81.2% of the respondents were satisfied (or very satisfied) with 'attending classes' and 75%, with 'paper lectures'. On the other hand some of respondents were very dissatisfied with 'recorded lecture(12.8%)' and 'radio lecture(10.9%)' 6. The results also showed that the students want to have 'video conferencing lecture(77.2%)', 'cable TV(64.1%)' and 'CD ROM program' to improve learning effects. 7. Concerning learning attitudes, 48.8% of the students reported 'study mainly for examnination', and only 4.1% answered 'study every day with plan'. The learning attitude showed significant differences by marital status and age. The students also evaluated themelves as 'study very hard(5.9%)', 'study hard in general(41.6%)', 'study a little(40.3%)' and 'study little(11.9%)'. 8. The students responded the most effective learning material was the 'textbook (92.2%)'. 9. For the purposes of using the local center, the results showed 'for the attending classes(76.3%)', 'for the use of references(14.7%)', and 'for the study group(66.7%)'. 10. The results revealed that 20.3% of the respondents had ever experienced unregistration or temporary withdrawal, and 53.4% among them did not register more than one time. The most common reason for the unregistration was 'due to family affairs or their job (70.8%)'. 11. 88.1% of the respondents answered 'they will graduate without fail'. 12. Regarding the benefits from the KNOU graduation, respondents indicated 'graduate school admission(38.1%)', 'self-confidence in social life(17.5%)', and understanding social problems (10.9%)'. 13. 64.4% of the students showed that they have intention to enter the graduate school. The item 'changing work place' showed statistically significant differences by marital status and age.

• Journal of Korean Society of Forest Science
• /
• v.51 no.1
• /
• pp.22-35
• /
• 1981

This study was designed to know difference in degree of dehardening and rehardening respectively by artificial high and low temperature treatments among different clonal seedlings and seedlings from different seed sources of Cryptomeria japonica which have been grown under the cold areas in Japan and Korea. High temperature treatment was done with 15 to $20^{\circ}C$ under 100% relative humidity for one to nine days and low temperature treatment was carried with $-7^{\circ}C$ for one to three days. Occasionaly, high temperature treatment was combined and followed by low temperature treatment. The ability of stem section to delay dehardening by high temperature treatment and/or to hasten rehardening by low temperature treatment was used as an indicator of adaptability under extreme temperature fluctuation in nature. Clones and seedlings from different seed sources which showed greater freezing resistance than others after artificial high and/or low temperature treatments were selected over two to three time periods: early winter, mid winter and early spring in 1977 to 1980. These were Seoul #7, and #9, Namboo #3, and #4, Sung-Kang #11, Chung-Sam #8 and Huek-Suk #9. These selected seedlings might have survival advantage to withstand early and late frost damage, especially the critical frost damage of the basal stem, since it was known to be induced by lowering freezing resistance of the basal part when exposed to the high temperature near the ground during the day. Large variation in freezing resistance and degree of dehardening and rehardening was found among clonal or seed sources and among individuals within a seed source, but was not related to the difference in climatic conditions where the parent trees was selected. These indicated the possibility of future breeding work for more cold resistant family of Cryptomeria japonica.