• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.9
• /
• pp.1325-1332
• /
• 2013

The first frame of a GOP, an I frame, is encoded in intra mode which generates a larger number of bits. In addition, the I frame is used for the inter mode encoding of the following frames. Thus the intial QP for the I frame affects the first frame as well as the following frames. In our previous work, we analyzed the number of bits for an I frame and showed that the ratio of the number of bits which maximizes the PSNR of a GOP maintains similar value regardless of GOP's. In this paper, we propose a R-Q model which can be used for the calculation of the initial QP given the amount of bits for an I frame. The proposed model is simple and adaptively modifies model parameters, so it can be applicable to the real-time application. It is shown by experimental results that the proposed model captures initial QP characteristics effectively and the proposed method for model parameters accurately estimates the real values.

• Structural Engineering and Mechanics
• /
• v.71 no.5
• /
• pp.553-562
• /
• 2019

This paper presents the results of a study into the dynamic behaviour of a support structure of a mobile elevating work platform. The vibrations of the mechanical system of the observed structure are examined analytically, numerically, and experimentally. Within the analytical examination, a simple mathematical model is developed to describe free and forced vibrations. The dynamic analysis of the mechanical system is conducted using a discrete dynamic model with a reduced number of vibrational degrees of freedom. On the basis of the expression for the system energy, and by applying Lagrange's equations of the second kind, differential equations are derived for system vibrations, frequencies are determined, and the laws of forced platform vibration are established. At the same time, a nonlinear FEM model is developed and the laws of free and forced vibration are determined. The experimental and numerical part of the study deal with the examination of the real structure in extreme conditions, taking into account: the lowest eigenfrequency, forced actions that could endanger the general stability, the maximal amplitudes, and the acceleration of the work platform. The obtained analytical and numerical results are compared with the experiments. The experimental verification points to the adverse behaviour of the platform in excitation cases - swaying. In such a situation, even a relatively small physical force can lead to unacceptably high amplitudes of displacement and acceleration - exceeding the usual work values.

• Smart Structures and Systems
• /
• v.8 no.2
• /
• pp.205-217
• /
• 2011

This article describes the research work involving the implementation of an Active Bracing System aimed at the modification of the initial dynamics of a laboratorial building structure to a new desired dynamics. By means of an adequate control force it is possible to assign an entirely new dynamics to a system by moving its natural frequencies and damping ratios to different values with the purpose of achieving a better overall structural response to external loads. In Civil Engineering applications, the most common procedures for controlling vibrations in structures include changing natural frequencies in order to avoid resonance phenomena and increasing the damping ratios of the critical vibration modes. In this study, the actual implementation of an active system is demonstrated, which is able to perform such modifications in a wide frequency range; to this end, a plane frame physical model with 4 degrees-of-freedom is used. The Active Bracing System developed is actuated by a linear motor controlled by an algorithm based on pole assignment strategy. The efficiency of this control system is verified experimentally by analyzing the control effect obtained with the modification of the initial dynamic parameters of the plane frame and observing the subsequent structural response.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.2 no.1
• /
• pp.35-39
• /
• 2019

This paper presents two social and academic studies on the boundary between cultural production and consumption. The first line of the study on cultural omnivore analyzes the choice of heterogeneous audiences in the face of various cultural offerings. The second line is a study of market categories, which analyzes the responses of peer audiences to objects with different levels of category code compliance. As such, this paper developed a heterogeneous audience model to evaluate objects of different types. This allows us to consider two dimensions of cultural preference: diversity and orientation of selection. To this end, this paper proposes a new analytical frame work to map consumption behavior on these two dimensions. The results suggest that one type of target that values diversity and transformation is particularly resistant to those that span boundaries. We test this argument in the analysis of two large data sets on film and restaurant reviews. Overall, our findings can extend beyond cultural consumption. Outline variability of contextual individuals or individuals in the same situation can cross cultural boundaries even if they are not intentionally pursuing such hybridism.

• The Journal of the Korean dental association
• /
• v.22 no.7 s.182
• /
• pp.621-633
• /
• 1984

The possibility of expanding the linear range of the Kinesiograph was studied using a nonferromagnetic mechanical positioning device. The magnet was moved in linear steps of 5 mm through three planes parallel to the frame work carrying the sensors within working range of a 3 cm wide by 4 cm deep by 5 cm high three dimensional lattice and a matrix of 693 data points was achieved. For each data point, the three Kinesiograph outputs were associated with the values of actual position. Once three coordinates of observed values were known, actual values could be determined. A computer program was specially written in Fortran to deal with this work. Because each dat point was 5 mm apart from each other, there would be 480 cubes with 8 data points Further refinement of the system is possible using a smaller interval between each data point. In conclusion, a theoretical model was presented which, by means of computer support, would allow the absolute measurement of jaw position over the entire range of functional jaw movements.

• Steel and Composite Structures
• /
• v.29 no.4
• /
• pp.483-491
• /
• 2018

Timoshenko beam model is widely exploited in the literature to examine the mechanical behavior of stubby beam-like components. Timoshenko beam theory is well-known to require the shear correction factor in order to recognize the nonuniform shear distribution at a section. While a variety of shear correction factors are appeared in the literature so far, there is still no consensus on the most appropriate form of the shear correction factor. The Saint-Venant's flexure problem is first revisited in the frame work of the classical theory of elasticity and a highly accurate approximate closed-form solution is presented employing the extended Kantorovich method. The resulted approximate solution for the elasticity field is then employed to introduce two shear correction factors consistent with the Cowper's and energy approaches. The mathematical form of the proposed shear correction factors are then simplified and compared with the results available in the literature over an extended range of Poisson's and aspect ratios. The proposed shear correction factors do not exhibit implausible issue of negative values and do not result in numerical instabilities too. Based on the comprehensive discussion on the shear correction factors, a piecewise definition of shear correction factor is introduced for rectangular cross-sections having excellent agreement with the numerical results in the literature for both shallow and deep cross-sections.

• The Journal of Korean Association of Computer Education
• /
• v.18 no.1
• /
• pp.13-20
• /
• 2015

The new plan for the current computer engineering involved in education and research in the values of the major and one of the female students, and you can improve your major satisfaction and retention training and development assessment process is the point of need. in computer engineering majors can be linked to the process of targeted quantitative and qualitative research conducted by the results of major and career choices of students turned out to be a mismatch could result in the phenomenon of female engineering escape. How to study ICT in education for female students to computer engineering major regional, historical and social context should be re-designed to suit the characteristics and analysis of exposed female students majoring computer engineering from anxiety and weak organization that has a sense of belonging, and to offer the first and is the appropriate teaching methods seems to be.

• Journal of Global Scholars of Marketing Science
• /
• v.18 no.4
• /
• pp.33-59
• /
• 2008

This paper aims to analyse the preference for German farm tourism among the German population. For this reason, we conducted an empirical study in Germany during summer 2007 and we applieda structural equation model based on partial leasts quares(PLS) to analyse the data. In the following chapters we will introduce the literature review and our conceptual frame work. We will then outline the procedures we adopted and the results of the empirical analysis. In the final part so me conclusions will be presented and a discussion will follow in order to draw the future directions of our research. According to our hypotheses, the possibility that agri-tourism enters in the evoked set of an individual is higher: H1: The higher the information degree about it. H2: The lower the influence of the social stimuli. H3: The higher the physical exposure to it (experience). H4: The higher the wellness image of agri-tourism. H5: The higher the traditional image of agri-tourism. H6: The higher the exciting image of agri-tourism. H7: The higher the perceived value for money. Our further hypotheses affirm that the possibility that agri-tourism enters in the evoked set of an individual is higher: H8: The lower the perceived risk. H9: The higher the motive to enjoy a holiday in the nature. H10: The higher the motive to enjoy a sport holiday. H11: The lower the motive to have an organized holiday. H12: The lower the motive to have a holiday abroad. H13: The lower the motive of action and night life. H14: The higher the motive to spend a holiday with the family. H15: The lower the motive to spend a city holiday. Finally, our model has some socio-demographics data. As we mentioned before, German agri-tourism has traditionally been the travel destination of large-size families, with low-to-middle income. For that reason, our final hypothesises are the following: the possibility that agri-tourism enters in the evoked-set of an individual is higher: H16: The higher the number of family members. H17: The lower the family income. Since in this study we use a path model with a PLS approach, we are able to state some interrelations among the exogenous latent variables: H18: The motive of sport holiday has a positive influence towards nature motives. H19: The physical exposition to agri-tourism has a positive influence toward information. H20: The motive of family holiday has a negative influence toward the motive of action and night life. H21: Social stimuli have a positive influence towards individuals risk perceptions. H22: Social stimuli have negative influence towards experience. Data for this study were gathered via administrated questionnaires during the summer 2007 within the frame of an academic "marketing research" course. The corresponding t-values are assessed using the bootstrapping method with 500 re-samples. In our model 61% of the degree of appreciation of German agri-tourism (evoked set) is explained by five independent variables: value for money ($0.335^{{\ast}{\ast}{\ast}}$) (H7) experience ($0.267^{{\ast}{\ast}}$) (H3), exciting image ($0.204^{\ast}$) (H6) organisation ($-0.162^{\ast}$) (H11) and holiday abroad ($-0.156^{\ast}$) (H12). The variance explained ($R^2$) for the other endogenous variables are the following: nature 24.3%, information 14.1%, action holiday 13.8%, risk perception 5.8% and experience 2.4%. An overview can be inferred from table 5. The results also allow us to test each of the proposed hypotheses. With exception of organization and abroad, none of the others travel style factors (H9 to H15) seem to have any significant impact towards evoked set which leads to the rejection of the respective hypotheses. As expected, social stimuli have a significant influence on individuals' risk perception (H21 accepted), however neither the former nor the latter have a valuable impact on evoked set (rejection of H2 and H8). Besides, since the influence of social stimuli towards experience is not significant, also H22 has to be rejected. Experience influences information (H19 accepted) but the latter does not affect significantly the evoked set (H1 rejected). Both H4 as well as H5, referring respectively to the perceived images of German agri-tourism as a wellness destination and the traditional image of the German farm tourism have to be rejected. Finally, none of the demographic data included in the model explains significantly the variance of the factor evoked set. Therefore neither H16 nor H17 has been accepted. As far as the interrelation between sport and nature (H18) and family and action (H20) are concerned, the stated relationship among these variables has been statistically confirmed. Our path model based on partial least squares shows the factors influencing the preference for farm tourism in Germany. Among others value for money and experience are the most significant ones. Practical implications are discussed.