• 한국산학기술학회논문지
• /
• 제9권2호
• /
• pp.281-285
• /
• 2008

냉간단조금형(Cold Forging Die)의 다이블록(Dieblock)을 제작하는 방법 중의 하나로, 다이블록 제작용 재료를 면가공 하여 다이블록 상면(上面)을 마스터펀치(Master Punch)인 호브(Hob)로 압입(Indentation) 시켜 절삭가공((Cutting Work)이 아닌 다이호빙(Die Hobbing) 방법으로 임프레션(Impression)을 성형하여 제작하고 있다. 이 방법에 의하여 다이블록의 재료를 합금공구강(Alloy Tool Steel)인 SKD11을 사용하여 제작하고, 스테인리스판(Stainless Sheet Metal)을 제품 재료로 하여 냉간단조가공(Cold Forging Work)을 수행하였더니 6,000 스트로크(Stroke)에서 금형수명(Die Life)을 다 하고 파손되었다. 본 논문에서는 다이블록 재료를 고속도공구강(High Speed Tool Steel)인 SKH51로 교체 제작하고, 탄소강(Carbon Steel)인 S45C를 제품 재료로 하여 냉간단조가공을 수행하였더니 21,000 스트로크에서 금형수명을 다하고 파손되어 종래의 방법과 비교 검토하였을 때 350%의 금형수명 연장 효과를 얻게 되었다.

• 생물환경조절학회지
• /
• 제30권4호
• /
• pp.359-366
• /
• 2021

본 연구는 대규모 온실에서 작업관리와 인력관리 및 병해충 모니터링을 위한 HRM 프로그램을 개발하여 현장적용 시험을 수행하였다. 작업자의 전용 앱으로 작업지시와 현장의 작업내용 및 병해충 발생에 대한 정보를 입력할 수 있다. 관리자는 작업자의 작업내용별 노동시간과 작업속도, 작업품질을 평가하여 기록하고 이를 토대로 작업별 작업속도 기준을 설정할 수 있으며, 작업일정 수립이나 작업 투입인원의 결정이 용이하게 될 것이다. 따라서 고용인원을 효율적으로 운용하면서 작업수행을 용이하게 할 수 있으며, 작업자의 수급계획을 세울 때도 용이하게 사용될 수 있다. 시기별 작업분석을 통해 고용인원의 적정성을 평가할 수 있고 정규인력과 비정규 인력에 대한 수급비율을 조정할 수 있게 할 것이다. 작업자의 실시간 작업성과를 공개하며 작업자 간 경쟁을 유도하고 기준작업량 이하를 달성하는 작업자의 재교육 및 작업방법 개선을 통해 작업효율의 상승이 가능하다. 실증현장에서 분석해본 파프리카의 작업은 순치기, 수확 및 유인작업이 모든 작업시간의 91%이상을 차지하며, 수확작업보다 유인 및 순치기 작업시간이 두배정도 더 많은 것으로 나타났다. HRM 프로그램을 도입하기 전과 도입한 이후 가장 노동부하가 높은 시기인 수확과 유인 및 순치기 작업이 동시에 진행되는 시기를 비교했을 때 HRM 프로그램의 도입으로 37%의 작업량 향상을 가져왔다.

• Journal of Mechanical Science and Technology
• /
• 제16권7호
• /
• pp.935-941
• /
• 2002

This work is to investigate the combustion characteristics and flame propagation of the LPG (liquified petroleum gas) and gasoline fuel. In order to characterize the combustion processes of the fuels, the flame propagation and combustion characteristics were investigated by using a constant volume combustion chamber The flame propagation of both LPG and gasoline fuels was investigated by the laser deflection method and the high-speed Schlieren photography. The result of laser deflection method show that the error of measured flame propagation speed by laser method is less than 5% compared with the result of high-speed camera. The flame propagation speed of the fuel is increased with the decrease of initial pressure and the increase of initial temperature in the constant volume chamber. The results also show that the equivalence ratio has a grate effect on the flame speed, combustion pressure and the combustion duration of the fuel-air mixture.

• Journal of Power Electronics
• /
• 제14권2호
• /
• pp.341-350
• /
• 2014

The torque ripple of switched reluctance motors (SRMs) is the main disadvantage that limits the industrial application of these motors. Although several methods for smooth-toque operation (STO) have been proposed, STO works well only within a certain torque and speed range because of the constraints of the supply voltage and peak current. Based on previous work that sought to expand the STO range, a scheme is developed in this study to determine the maximum smooth torque range at each speed. The relationship between the maximum smooth torque and speed is defined as the smooth torque speed characteristics (STSC), a concept similar to torque speed characteristics (TSC). STSC can be utilized to evaluate torque utilization by comparing it with TSC. Thus, the concept benefits the special design of SRMs, especially for the generation of smooth torque. Furthermore, the torque sharing function (TSF) derived from the proposed method can be applied to STO, which produces a higher smooth torque over a wider speed range in contrast to four typical TSFs. TSimulation and experimental results verify the proposed method.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.1812-1821
• /
• 2014

Wind has been a rapidly growing renewable power source for the last twenty years. Since wind behavior is chaotic in nature, its forecasting is not easy. At the same time, developing an accurate forecasting method is essential when wind farms are integrated into the power grid. In fact, wind speed forecasting tools can solve issues related to grid stability and reserve allocation. In this paper 30 hours ahead wind speed profile forecast is proposed using Adaptive Wavelet Neural Network (AWNN). The implemented AWNN uses a Mexican hat mother Wavelet, and Morlet Mother Wavelet for seven, eight and nine levels decompositions. For wind speed forecasting, the time series data on wind speed has been gathered from the National Renewable Energy Laboratory (NREL) website. In this work, hourly averaged 10-min wind speed data sets for the year 2004 in the Midwest ISO region (site number 7263) is taken for analysis. Data sets are normalized in the range of [-1, 1] to improve the training performance of forecasting models. Total 8760 samples were taken for this forecasting analysis. After the forecasting phase, statistical parameters are calculated to evaluate system accuracy, comparing different configurations.

• 한국소음진동공학회논문집
• /
• 제26권7호
• /
• pp.857-864
• /
• 2016

In the present work, vibration analysis of high speed rotary bell cup model for paint atomizer application is carried out through numerical simulation. At first, eight bell cup models, considering four different cup shapes and two different cup diameters, are proposed and corresponding dynamic characteristics are investigated. To evaluate the operating stability, critical speed analysis is conducted using Campbell diagram and separation margin between operating speed and critical speed is identified. Unbalance vibration responses are also studied according to operating speed and balancing quality grade of G. Finally, the stability and adequacy of the proposed bell cup models are discussed for field application.

• 한국소음진동공학회논문집
• /
• 제12권1호
• /
• pp.21-28
• /
• 2002

This paper intends to investigate the effects of speed fluctuation caused by the cogging torque in permanent magnetic motors on the stability of the transverse vibration for a spinning disk. Based on the Kirchhoff\`s plate theory and the assumed mode methods, a set of discretized equations of motion were derived for an annular disk rotating with a harmonically varying speed. Then, a perturbation method using the multiple time scales was employed and stability boundaries were determined explicitly in terms of the magnitude and frequency of speed fluctuation, a nominal sped and the modal characteristics of the disk. It is found that parametric resonance occurs at several speed ranges and a single mode or a combination of two modes are involved to cause instability. It is also observed that unstable regions become broadened as the spinning speed increases or two modes are combined in parametric instability. As numerical simulations, stability analysis of a conventional CD-ROM drive was performed. Results of this work can e used as guidelines for motor design and operations with low vibration.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.85-88
• /
• 2008

Damage from typhoon disaster can be mitigated by grasping and dealing with the damage promptly for the regions in typhoon track. What is this work, a technique to analyzed dangerousness of typhoon should be presupposed. This study estimated 10m level wind speed using 700hPa wind by typhoon, referring to GPS dropwindsonde study of Franklin(2003). For 700hPa wind, 30km resolution data of Regional Data Assimilation Prediction System(RDAPS) were used. For roughness length in estimating wind of 10m level, landuse data of USGS are employed. For 10m level wind speed of Typhoon Rusa in 2002, we sampled AWS point of $7.4\sim30km$ distant from typhoon center and compare them with observational data. The results show that the 10m level wind speed is the estimation of maximum wind speed which can appear in surface by typhoon and it cannot be compared with general hourly observational data. Wind load on domestic buildings relies on probability distributions of extreme wind speed. Hence, calculated 10m level wind speed is useful for estimating the damage structure from typhoon.

• 자연, 터널 그리고 지하공간
• /
• 제3권2호
• /
• pp.32-44
• /
• 2001

Most of the major aspects of the high speed rail tunnels in Korea, including such items as the tunnel geometry, excavation methods, primary support, final lining, drainage and waterproofing, are similar to the practices followed in other countries. The tunnels in Korea provide the largest net internal area $(107\;m^2)$ as compared to the other counties addressed in this paper. The effective adaptation and modification of international practices and designs, combined with the integration of domestic practices, has resulted in the successful construction of these large tunnels. The experience gained from the completed work to date on the high speed line in Korea, combined with international technology input, will help to ensure future tunnels are constructed in an efficient manner with adequate design measures implemented for the long-term operational life of the tunnels. As has occurred in these other countries, further improvements and modifications to the Korea high-speed railway tunnels will occur as experience is gained and new technology develops.

• 해양환경안전학회지
• /
• 제13권3호
• /
• pp.229-234
• /
• 2007

현재 근해어업은 기피 산업으로 어민들의 고령화 및 감소로 인력을 구하기 어렵고 어로활동을 하기 위해서는 일반적으로 2명 이상이 1조로 작업이 진행된다. 따라서 숙련되지 못한 사람들이 조를 이루어 작업을 할 경우 의사전달에 시차가 생기고 한사람은 배의 조종에 매달리므로 작업의 능률이 떨어진다. 따라서 레저나 소형어선에서 1인이 선박을 조종하면서 작업이나 레저를 즐길 수 있는 선외기의 원격제어 시스템 연구의 필요성이 대두되었다. 본 연구에서는 작업의 효율을 높이고 인력을 절감 할 수 있는 선외기의 원격제어시스템에 관한 연구를 수행하였다. 선외기는 엔진, 조타기, 정 역전 및 중립 기어박스가 하나의 시스템으로 구성되어 있다. 소형 선외기에 이 세 가지의 제어를 직류전동기를 이용하여 위치제어와 속도제어를 하였고, 마이크로컨트롤러를 이용하여 조타기와 엔진회전수 제어를 프로그램화 하여 어민들이 작업을 하면서 동시에 원하는 조종을 할 수 있도록 시스템을 설계 제작하였다. 시운전결과 전속에서 좌 우현 조타 성능이 명령대로 잘 움직였다.