Browse > Article
http://dx.doi.org/10.5050/KSNVN.2002.12.1.021

Stability Analysis of Transverse Vibration of a Spinning Disk with Speed Fluctuation  

신응수 (충북대학교 공과대학 기계공학부)
이기녕 (충북대학교 대학원 기계공학부)
신태명 (충주대학교 기계설계학과)
김옥현 (충북대학교 공과대학 기계공학부)
Publication Information
Transactions of the Korean Society for Noise and Vibration Engineering / v.12, no.1, 2002 , pp. 21-28 More about this Journal
Abstract
This paper intends to investigate the effects of speed fluctuation caused by the cogging torque in permanent magnetic motors on the stability of the transverse vibration for a spinning disk. Based on the Kirchhoff\`s plate theory and the assumed mode methods, a set of discretized equations of motion were derived for an annular disk rotating with a harmonically varying speed. Then, a perturbation method using the multiple time scales was employed and stability boundaries were determined explicitly in terms of the magnitude and frequency of speed fluctuation, a nominal sped and the modal characteristics of the disk. It is found that parametric resonance occurs at several speed ranges and a single mode or a combination of two modes are involved to cause instability. It is also observed that unstable regions become broadened as the spinning speed increases or two modes are combined in parametric instability. As numerical simulations, stability analysis of a conventional CD-ROM drive was performed. Results of this work can e used as guidelines for motor design and operations with low vibration.
Keywords
Transverse Vibration; Spinning Disk; Cogging Torque; Speed Fluctuation; Stability; Perturbation Method; Multiple Time Scales; Parametric Resonance;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Mazzei, A. J. Jr., Argento, A. and Scott, R. A., 1999. "Dynamic Stability of Rotating Shaft Driven Through a Universal Joint," J. of Sound and Vibration. Vol. 222. No. 1. pp. 19-47.   DOI   ScienceOn
2 Parker, R. G. and Sathe, P. J., 1999, "Exact Solution for the Free and Forced Vibration of a Rotating Disk-spindle System." J. of Sound and Vibration. Vol. 223. No. 3. pp. 445-465.   DOI   ScienceOn
3 정진태, 1995, "컴퓨터 하드 디스크의 안정성을 위한 스핀들 모터 회전수 선정에 관한 연구." 한국소음진동공학회지, 제 5권, 제 2호, pp. 163-168.   과학기술학회마을
4 Fung, R. F., 1997, "Vibration and Variable Structure Control with Integral Compensation in a Non-Constant Rotating Disk System." J. of Sound and Vibration, Vol. 119, No. 2, pp 223-236.
5 Huang, F. Y. and Mote, C. D., 1995. "On the Stability Mechanisms of a Disk Rotating Close to a Rigid Surface," ASME J. of Applied Mechanics. Vol. 62, pp. 764-771.   DOI   ScienceOn
6 이승엽, 김재관, 김수경, 1999. "차세대 광 디스크의 진동특성(2) : 초기응력에 의한 고유진동수 변화," 한국소음진동공학회, 추계학술대회논문집, pp. 455-461.
7 Lee, C. W. and Chun, S. B., 1998, "Vibration Analysis of a Rotor With Multiple Flexible Disks Using Assumed Modes Method," ASME J. of Vibration and Acoustics. Vol. 120. pp. 87-94.   DOI   ScienceOn
8 Shen, I. Y. and Mote, C. D., 1992. "Parametric Excitation Under Multiple Excitation Parameters: Asymmetric Plates Under a Rotating Spring." Int. J. of Solids Structures. Vol. 29. No. 8. pp. 1019-1032.   DOI   ScienceOn
9 Young, T. H. 1992. "Nonlinear Transverse Vibrations and Stability of Spinning Disks with Nonconstant Spinning Rate," ASME J. of Vibration and Acoustics. Vol. 114, pp. 506-513.   DOI
10 Rahman, B. S. and Lieu, D. K., 1994. "Optimization of a Magnetic Pole Geometry for Field Harmonic Control in Electric Motors," J. of Vibration and Acoustics. Vol. 116. pp. 173-178.   DOI   ScienceOn
11 최태영, 정진태, 2000, "비연성된 지배 방정식을 이용한 각가속도를 갖는 회전원판의 동적 안정성 해석." 대한기계학회논문집 A권, 제 24권, 제 6호, pp. 1363-1370.   과학기술학회마을
12 임경화, 2000, "헤드 간섭으로 인한 회전 디스크의 안정성 분석." 한국소음진동공학회지, 제 10권, 제 5호, pp. 163-168.   과학기술학회마을
13 Wang, J. H. and Huang, W. C., 2001. "The Improvement of the Dynamic Behaviour of a Spindle Motor for a CD-ROM Drive," Int. J. of Acoustics and Vibration. Vol. 6, No. 2, pp. 57-64.
14 Kyosuke, O., Chen, J. S. and Bogy, D. B., 1992. "Stability Analysis for Head-Disk Interface in a Flexible Disk Drive." ASME J. of Applied Mechanics. Vol. 58. pp. 1005-1014.