• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.1
• /
• pp.11-17
• /
• 2010

This study investigates the non-traditional manufacturing process of dry wire electrical discharge machining (EDM) in which liquid dielectric is replaced by a gaseous medium. Wire EDM experiments of thin workpieces were conducted both in wet and dry EDM conditions to examine the effects of spark cycle (T), spark on-time ($T_{on}$), thickness of work pieces, and work material on machining performance. The material removal rate (MRR) in the dry wire EDM case was much lower than that in the wet wire EDM case. In addition, the thickness of workpiece and work-material were found to be critical factors influencing the MRR for dry EDM process. The relative ratios of spark, arc and short circuit were also calculated and compared to examine the effectiveness of processes of dry and wet wire EDM.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.4
• /
• pp.282-292
• /
• 2008

This study was conducted to evaluate work environment monitoring program(WMP) under Industrial Safety and Health Act in Korea. WMP was evaluated by focusing on five key elements, such as purpose, subject, scope, method and workers' participation. The operation status of WMP was evaluated by using questionnaire to workers and data published by Ministry of Labor(MOL). Compliance rate of WMP was less 13 % in manufacturing workplaces. Over-exposure rate was steady state by annual trend. The degree of workers' satisfaction to WMP was just 24 %. A critical problem with the current WMP is that the employer and workers are not acting as main players. For a fundamental improvement in working condition to take place, participation of workers should be expanded and be guaranteed by law.

• The Journal of Internal Korean Medicine
• /
• v.16 no.2
• /
• pp.61-73
• /
• 1995

In this study, the effects of Boshimdan, which is used in oriental medicine for the treatment of palpitation, chest discomfort, impatience, insomnia, forgetfulness ete., were tested as a part of series of experimental verification of prescriptions treatments for preventing and curing ischemic heart. The results were as follows: 1. Boshimdan did not effectively work on heart rate of the perfused rat heart. 2. Boshimdan did not effectively work on heart pressure of the perfused rat heart. 3. Boshimdan did not effectively work on flow rate of the perfused rat heart. 4. Boshimdan was not effective in activation of GOT. 5. Boshimdan was not effective in activation of GPT. 6. Boshimdan was not effective in activation of LDH. 7. Boshimdan was not effective in activation of CPK.

• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1723-1729
• /
• 2021

Energy and directional distribution of neutrons at the Beloyarsk NPP workplaces is a subject of this study. Measurements of H^*(10) rate and neutron energy distribution were taken at 8 workplaces, which can be divided into three categories: work with spent or fresh nuclear fuel, work with radionuclide neutron sources, work at the rooms adjusted to reactors. The Hp(10) measurements were performed only at 6 out of 8 locations, due to the fact that long term placing of an effective neutron moderator in fresh nuclear fuel storage facility is forbidden. As a result of the research energy and direction distribution of the neutron fields at 8 locations of the Beloyarsk NPP workplaces was obtained. To estimate the accuracy of the H^*(10) rate and Hp (10) measurements the reference values of dose equivalents were calculated using energy and directional distribution. To take into account the difference between the reference values and the measured results site-specific correction factors were calculated.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.554-562
• /
• 2007

This study determined tact process paths by separating the finish works according to the properties of work areas and work relations in order to apply the tact schedule management to the finish works. In addition, by suggesting preparing and sharing the workflow charts, the experiments can be shared between the executors and any possible frictions between the specialist works can be identified in advance. In addition, any errors on the plan can be reviewed and modified through the measurement stage of tact plan attainment rate. The process of tact schedule management is improved with such tools and methods and the efficiency of the process through the application of cases was verified.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.501-504
• /
• 2006

The estimation of the work of heart can be treated as one of the most important parameters for determining the amount of circulating blood needed for harmonious metabolism in the human body. By monitoring the work of heart, one can detect increased work load of heart and start the treatment at the early stage of CHF. Thus it is necessary to estimate the work of heart. The contractility of the left ventricle, the second important parameter for representing the motion of heart, can be estimated through information on the work of heart. In this study, the modified Windkessel model, which has been used for a measure of vascular hemodynamic impedance parameters, was adapted to estimate the work of heart.

• Journal of Family Resource Management and Policy Review
• /
• v.13 no.2
• /
• pp.85-105
• /
• 2009

The purpose of this study is to compare the laws and policies relating to work-family balance with foreign cases, and to analyse the problems in implementing those laws and policies. For these purpose, this study compares family leave policies, working hams policies, public care policies in other countries. And these laws in Korea are shown. This study also analyse the policies for work-family balance in labor policy, family policy, gender policy and saeromaji plan. The results are as follows; policies for work-family balance are limited to child care and family leave. Laws for family leave are various and proper. But implementing rate of policy goal is low and a few people can benefit by those laws and policies. So, wide-range policies for work-family balance which all the families can benefit are needed.

• Journal of the Ergonomics Society of Korea
• /
• v.24 no.1
• /
• pp.37-41
• /
• 2005

Work related musculoskeletal disorders became a hot issue in Korea since many workers reported musculoskeletal disorder problems. Korean government enacted a law to require companies to take measures to prevent musculoskeletal disorders at work. This study found workers' WMSDs symptoms in squatting work posture which the rate of the occurrence was relatively high among work types to bring about WMSDs in railroad cars maintenance works and analyzed to compare the hazardous jobs in the industrial safety health law in South Korea with the caution jobs in Washington State in U.S. The hazardous jobs in South Korea were more effective in squatting work posture from this study result and this study data will be a great help to plan and carry out an effective prevention program about WMSDs.

• Nuclear Engineering and Technology
• /
• v.10 no.2
• /
• pp.73-78
• /
• 1978

The effect of temperature and strain rate on the deformation behavior of $\alpha$-uranium was investigated in the temperature ranged 300$^{\circ}$ to 55$0^{\circ}C$ by strain, rate change test. Strain rate sensitivity, activation volume, strain rate sensitivity exponent and dislocation velocity exponent were determined. The strain rate sensitivity exponent and dislocation velocity exponent were determined. The strain rate sensitivity exponent increases with strain below 40$0^{\circ}C$, while the exponent decreases with strain above 50$0^{\circ}C$. It is believed that the increase of strain rate sensitivity exponent with strain below 40$0^{\circ}C$ can be attributed to an increase in internal stress as a result of work hardening while decrease of the exponent with strain above 50$0^{\circ}C$ is due to predominance of thermal softening over work hardening because more slip, system are active in deformation above about 50$0^{\circ}C$.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.3
• /
• pp.556-571
• /
• 2020

This study predicts consumer preference for social clothing at work, excluding uniforms using the self-product congruence theory that also establishes a model to predict the preference for recommended products that match the consumer's own image. A total of 490 Korean male office workers participated in this study. Participants' self-image and the product images of 20 apparel items were measured using nine adjective semantic scales (namely elegant, stable, sincere, refined, intense, luxury, bold, conspicuous, and polite). A model was then constructed to predict the consumer preferences using a neural network with Python and TensorFlow. The resulting Predict Preference Model using Product Image (PPMPI) was trained using product image and the preference of each product. Current research confirms that product preference can be predicted by the self-image instead of by entering the product image. The prediction accuracy rate of the PPMPI was over 80%. We used 490 items of test data consisting of self-images to predict the consumer preferences for using the PPMPI. The test of the PPMPI showed that the prediction rate differed depending on product attributes. The prediction rate of work apparel with normative images was over 70% and higher than for other forms of apparel.