• Journal of Korean Society of Forest Science
• /
• v.112 no.3
• /
• pp.303-321
• /
• 2023

To develop the Forest Work Load Index (FWLI) for estimating the work intensity of forest workers, a study focused on forest tending was conducted. To estimate the FWLI, we used the Ovako Working Posture Analysis System (OWAS) and the Work Load Index (WLI). The OWAS is a prominent method used for analyzing musculoskeletal load in work tasks, and WLI is a prominent method used for analyzing the work intensity of workers. The PRI values analyzed for each forest tending project were 185.3 (Thinning), 150.6 (Pruning), 181.1 (Thinning for Forest Fire Prevention), and 197.0 (Thinning for Young Trees). The WLI values, calculated on the basis of the measured heart rates, were 59.5% (Thinning), 53.5% (Pruning), 56.2% (Thinning for Forest Fire Prevention), and 62.3% (Thinning for Young Trees). The FWLI was calculated using the analyzed PRI and WLI values. The FWLI values for the forest tending project were 110.2 (Thinning), 80.7 (Pruning), 102.1 (Thinning for Forest Fire Prevention), and 123.0 (Thinning for Young Trees). The FWLI developed in this study can be used to quantitatively compare the workloads of forest workers. In the future, the analyzed FWLI can be used as a basis for improving forest workers' postures and comparing workloads across different forest projects.

• Journal of the Korean Society of Safety
• /
• v.36 no.1
• /
• pp.9-17
• /
• 2021

This study analyses the load imbalance of the tower crane used in telescoping work for structural safety, owing to the difference in wind speed and balance weight position. This is because wind speed and position of the balance weight have a significant impact on the structural stresses of a tower crane during telescoping work. Therefore, structural analysis was performed on the 290HC model, which is often used at construction sites and has only one cylinder installed. Moreover, two models were classified to determine the load acting on the connecting part of the telescopic cage to slewing platform and the cylinder. Five types of balance weight positions were applied at regular intervals from jibs; moreover, four types of wind load criteria were differently applied. Hence, the telescopic cage columns were destroyed at all balance weight positions at a wind speed of 30 m/s and only at certain locations at a wind speed of 20 m/s. Furthermore, failures occurred for cylinders, torsional, and bending at wind speeds of 30 m/s and 20 m/s, load imbalances above the allowable thresholds considering the safety factor. In addition, the load imbalance in the telescoping work also varied depending on the position of the balance weights. The results of these studies have validated that the current standards of adjusting the appropriate position of the balance weights on the jib are completely valid, with the telescoping work to be executed only at wind speeds of less than equal to 10 m/s.

• Communications for Statistical Applications and Methods
• /
• v.9 no.3
• /
• pp.649-663
• /
• 2002

We consider an unlimited fluid queueing model which has Fractional Brownian motion(FBM) as an input and a single server of constant service rate. By using the result of Duffield and O'Connell(6), we investigate the asymptotic tail-distribution of the stationary work-load. When there are multiple homogeneous FBM inputs, the workload distribution is similar to that of the queue with one FBM input; whereas for the heterogeneous sources the asymptotic work-load distributions is dominated by the source with the largest Hurst parameter.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2002.04a
• /
• pp.105-110
• /
• 2002

This study aims for the research of the local circulation in a kitchen to minimize the kitchen work load and to produce a more efficient kitchen system. This study analized the real behavior and circulation in the kitchen area and this focused on the kitchen of the working women in a dual-income family. Through the analisis, this study raised an idea that the work in the kitchen area is not in sequence, but random while the tradition idea of the kitchen system is arranged by cooking programe. Therefore, this became a reason to increase the kitchen work load ratter than the layout of the kitchen system, the cooking style and menu affected on the more kitchen load. To reduce the kitchen work load, the designeer should shorten the circulation in the kitchen area. And this is possible through the decrease distance between the sink and a kiting zone and through the wide kitchen table which is between the sink and a kiting zone.

• Journal of the Ergonomics Society of Korea
• /
• v.15 no.2
• /
• pp.89-98
• /
• 1996

The objective of this study was to make comparison of the physical work capacities with different types and methods of tasks. To produce standard work loads, a bicycle ergometer and a treadmill were used for the purpose of two different types of tasks. Maximal oxygen uptake measurement tests are usually performen (1) continuously - with no rest between work load increments, or (2) discontinuously - with the subjects resting several minutes between work periods. Continuous test protocol with two different methods of work load increments, (1) ramp test- with 3 to 5 minutes of work period for each work load, and (2) incremental test - where exercise intensity was increased progressively in 2 minutes interval, were used. Predicted physicala work capacities (PWCs) were compared with the one by Kim(1990), and Lee(1995), and the NIOSH physiological criteria. For ergometer test, the PWC based on the ramp test was 89.65% of the one based on the incremental test. The PWC values were 2553.88 ml/min for the ramp test and 2848.82 ml/min for the incremental test. For treadmill test, the PWC based on the ramp test was 97.54% of the one based on the incremental test. The PWC values were 2786.89 ml/min for the ramp test and 2857.24 ml/min for the incremental test. The PWC obtained with a bicycle ergometer was 91.64% of the one obtained with a treadmill for the ramp test, and 99.71% for the incremental test.

• Journal of the Korean Society of Safety
• /
• v.14 no.4
• /
• pp.192-198
• /
• 1999

Work-related musculoskeletal disorders constitute a major source of employee disability and lost wages. Cumulative Trauma Disorders(CTD) refers to a category of physical conditions which result from chronic musculoskeletal injury. Assessment of CTD risk in industry at early stage allows for early control, a safe environment, and a healthier workforce. In this study, the physical load of the shipping work in the cold storage warehouse were especially investigated. Employees were working with almost unnatural posture in a very restricted work space. The questionnaire and biomechanical analysis were used to evaluate the physical load. Results from analyses showed that they were sufficiently exposed to CTD due to repetition and unnatural posture. Based on the analysis, ways for improving working conditions are proposed. The analysis and proposals in this paper will serve as a basic tool for designing/redesigning working environment such as improvement of tools and equipments, design of times for work/rest cycle.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.8
• /
• pp.1062-1066
• /
• 2001

Studies were carried out on forty young bulls of the Hariana breed (around 18 months of age) selected on the basis of their dam's milk yield at the animal farm of CCS HAU, Hisar during the period 1993-1999. Since animals showed variation in capacity to work over prolonged periods, they were subjected to regimes of carting without load and with 8 qtls. of load for three hours. The study revealed that maximum change took place in the pulse rate, followed by respiration rate and rectal temperature. The mean fatigue score for pulling an empty cart ranged between 1.66 to 2.20 after two hours work, and 2.36 to 2.73 after three hours work. For a cart loaded with 8 qtls., the corresponding ranges were 2.90 to 3.36 and 3.40 to 4.10, respectively. These results indicated that the animals under experiment had the capacity to pull moderate load (8 qtls.) for about two hours without showing any serious effect on the ability to recover and soon to work again.

• Physical Therapy Korea
• /
• v.7 no.2
• /
• pp.20-34
• /
• 2000

The purpose of this study was to establish modified physiological cost index (PCI) for predicting energy consumption by heart rate (HR) at isokinetic ergometer exercise testing. The subjects were twenty-eight healthy men in their twenties. All of them performed upper and lower extremity isokinetic ergometer exercise tests which had six loads (400, 500, 600, 700, 800, and 900 kg-m/min) and five loads (400, 500, 600, 700, and 800 kg-m/min) respectively. The exercise sessions were finished when HR was in plateau. HR and oxygen consumption were determined during the final minute. Resting heart rate and oxygen consumption were used for calculating heart rate, oxygen consumption changes and modified PCI. Regression analysis established the relationship between each variable to work load, HR and oxygen consumption. The results were as follows: 1) In the lower extremity ergometer exercise test, oxygen consumption increased continuously as work load increased, but in the upper extremity ergometer test, oxygen consumption only increased until work load was 700 kg-m/min. 2) HR increased as work load increased in both exercise tests, but in the upper extremity ergometer test, HR decreased from the 700 kg-m/min. 3) The modified PCI increased as work load mcreased until the 700 kg-m/min point in the lower extremity ergometer test and until the 500 kg-m/min point in the upper extremity ergometer test when it started to decrease in both tests. 4) In the lower extremity ergometer exercise test, regression analysis established the relation as $dVO_2$ = -.0215HR - .2141 where $dVO_2$ is given in l/min and HR in beat/min ($R^2$ = .2677, p = .000). ln the upper extremity ergometer exercise test. regression analysis established the relation as $dVO_2$ = -.0115HR + .2746 ($R^2$ = .1308, p = .000). The results of this study were similar to previous studies but were different under high work load conditions. So modified PCI should be used with only low intensity work load testing. Subjects for upper extremity ergometer exercise testing should complete a prescribed training course prior to testing, and only low intensity work load should be used for safety considerations.

• Tribology and Lubricants
• /
• v.23 no.1
• /
• pp.9-13
• /
• 2007

Despite numerous researches on atomic-scale friction have been carried out for understanding the origin of friction, lots of questions about sliding friction still remain. It is known that friction at atomic-scale always shows unique phenomena called 'stick-slips' which reflect atomic lattice of a scanned surface. In this work, experimental study on the effects of system stiffnesses and load on the atomic-scale stick-slip friction of graphite was performed by using an Atomic Force Microscope and various cantilevers/tips. The objective of this research is to figure out the dependency of atomic-scale friction on the nanomechanical properties in sliding contact such as load, stiffness and contact materials systematically. From this work, the experimental observation of transitions in atomic-scale friction from smooth sliding to multiple stick-slips in air was first made, according to the lateral cantilever stiffness and applied normal load. The superlubricity of graphite could be verified from friction vs. load experiments. Based on the results, the relationship between the stickslip behaviors and contact stiffness was carefully discussed in this work. The results or this work indicate that the atomic-scale stick-slip behaviors can be controlled by adjusting the system stiffnesses and contact materials.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.495-503
• /
• 2010

The packing and sorting processes of grape are required repetitive movements to need considerable physical load for a long time. And thereby, there is strong possibility to cause musculoskeletal disorders. In this study, ergonomically designed convenience equipments of worktable and handcart are introduced for improvement of the working movements and less physical load to increase the work efficiency. For objective analysis of the movements and the workload between the ones before and after the improvement, we measured heart rate, OWAS, RULA, REBA, LMM, moving Line and work time. Also, we used a checklist of physical fatigue regions to confirm the subjective evaluation of physical load of workers. As the result of study, it showed lower heart rate, value of Working Postures (OWAS, RULA, REBA) and LMM in the work after introduction of those convenient equipments than the work of before the introduction. The work time and moving Line were shortened and the number of grape boxes packed within the same work time was increased, too. Also the overall load as the subjective evaluation was reduced.