• Steel and Composite Structures
• /
• v.8 no.1
• /
• pp.85-98
• /
• 2008

In this study the progressive collapse potential of three- and nine-story special steel moment frames designed in accordance with current design code was evaluated by nonlinear static and dynamic analyses. It was observed that the model structures had high potential for progressive collapse when a first story column was suddenly removed. Then the size of beams required to satisfy the failure criteria for progressive collapse was obtained by the virtual work method; i.e., using the equilibrium of the external work done by gravity load due to loss of a column and the internal work done by plastic rotation of beams. According to the nonlinear dynamic analysis results, the model structures designed only for normal load turned out to have strong potential for progressive collapse whereas the structures designed by plastic design concept for progressive collapse satisfied the failure criterion recommended by the GSA guideline.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.4
• /
• pp.372-381
• /
• 2013

In the construction industry, a great deal of research has been focused on productivity improvement because a minor change in labor productivity can often make the difference between a profit and a loss. This study shows how productivity measurement methods can be applied in practice, step by step, to analyze and identify potential problems both in productivity and methods performance for masonry work. A work sampling technique was conducted to determine the nature and extent of an observable activity as an aid to measuring overall performance. Also, a method productivity delay model was used to identify non-productivity in individual cycle times. From the work sampling technique, it was found that the masonry crew had a Labor Utilization Factor of 47.1%, and from the videotape analysis, it was found that the material and dumpster location need to be adjusted to reduce the travelling distance. We have found that efforts to improve the productivity of masonry work should be focused almost exclusively on machine and labor delays, based on the result from the method productivity delay model.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.6
• /
• pp.806-813
• /
• 2020

Objective : Lumbar disc herniation (LDH) is a common disease, and lumbar discectomy (LD) is a common neurosurgical procedure. However, there is little previous data on return to work (RTW) after LD. This study investigated the period until the RTW after LD prospectively. Clinically, the pain state at the time of RTW also checked. RTW failure rate 6 months after surgery also investigated. Methods : Patients with daily/regular jobs undergoing LD between September 2014 and December 2018 were enrolled. Pain was assessed by the Oswestri Disability Index (ODI) and the Numeric Rate Scale (NRS). Employment type was divided into self-employed, regular and contracted. Monthly telephone interviews were conducted to check RTW status and self-estimated work capability after surgery. Results : Sixty-seven patients enrolled in this study. Three patients failed to RTW, and three others resigned within 6 months after surgery. The preoperative NRS and ODI were 7.2±1.2 and 22.1±7.9, respectively. The average time to RTW was 5.1±6.0 weeks. At RTW, NRS was 1.5±1.8 and ODI was 6.3±3.9. Amongst patients that successfully returned to work were 16 self-employed workers, 42 regular employees, and three contracted workers. The time to RTW of self-employed, regular, and contracted workers were 5.9±8.8, 4.2±4.3 and 13.3±2.3 weeks, respectively (p=0.011). Thirty-six of the patients that returned to work self-reported a 22.8±15.6% reduction in work capability at 6 months. Conclusion : RTW may vary depending on the employment status. In this study, we found that while employment type may affect the length to RTW, most patients were able to RTW and >40% of patients reported no loss of work capabilities 6 months postoperatively, hopefully alleviating some patient hesitation towards LD.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.701-705
• /
• 2007

The equipment noise of machine room that generates at the building where human-being is living, is becoming to an object of strong civil appeal, and because it influences to the residential space through the floor or wall, its damage is very serious level. Accordingly, while an efficient forming of the sound insulating measures is earnest, as most of the transmission loss data was the material measured in laboratory, in case when it was applied to the job site, due to the precision difference of constructing work and the influence of detoured transmitting sound, the case of disaccord is the most. Therefore, this thesis has intended to present a fundamental data for an efficient establishment of sound insulation measure, by means of comparison analysis with the existing transmission loss data, after measurement of the transmission loss on the object of various walls, at the construction equipment machinery room.

• Journal of Nutrition and Health
• /
• v.46 no.3
• /
• pp.276-284
• /
• 2013

This study compared levels of health and dietary behavior practices and health beliefs according to the stage of weight loss behavior change of Korean male workers. A self-administered survey questionnaire was collected from 411 male adult workers residing in Seoul, Kyeonggi, Chungcheong region. Practices of health related behavior, including smoking, drinking, exercise, work related physical activity, and dietary behavior according to dietary guidelines were evaluated. In addition, the levels of perceived benefit, perceived barrier, perceived susceptibility, perceived seriousness, and perceived cue to action from the health belief model were measured according to the stages of weight loss behavior change. Significant differences in BMI, level of daily exercise, and practices of dietary behavior according to dietary guidelines were observed among stages of weight loss behavior change. Subjects who were in action/maintenance stage showed a more desirable level of health behavior and health belief model variables, except perceived barrier. Based on the findings of this study, it is suggested that subjects with different stages of behavior change need an appropriate specific nutrition education method and material for improvement of nutrition education efficacy.

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.1
• /
• pp.47-50
• /
• 2005

The AC loss is an important issue in the design of the high temperature superconductor (HTS) power cables, which consist of a number of lli 2223 tapes wound on a former. In the cables, the tapes have different critical currents intrinsically. And they are electrically connected to each other and current leads. These make loss measurements considerably complex, especially for short samples of laboratory size. In this work we have prepared a multi-tape conductor composed of Bi-2223 tapes. The at losses of the conductor have experimentally investigated. The loss tests indicate that the effect of tapes critical currents on AC loss measurement in the multi tape conductor is negligible only if currents in the tapes flow uniformly Moreover, the measured tosses of the conductor are in good agreement with the sum of the transport losses in the tapes. However, in the case of non-uniform current distributions, the measured AC losses considerably depend on the current distribution parameter of the positioning of a voltage lead. Thus special cautions should be needed for the measurement of the true AC losses in the short power cable samples.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.7
• /
• pp.831-840
• /
• 1999

In this work, an aerothermodynamic calculation model for cooled axial flow turbine blades with trailing edge ejection is suggested and a mean line performance analysis of a turbine stage with nozzle cooling is carried out. A unique model regarding the interaction between coolant and main gas is proposed, while existing correlations are adopted to predict viscous loss and blade outflow angle. The interactions considered are the heat transfer from main gas to coolant and the temperature and pressure losses by the mixing of two streams due to the trailing edge coolant ejection. For a stator blade without ejection, trailing edge loss calculated by the trailing edge analysis is compared with that calculated by loss correlation. The effect of heat transfer effectiveness of coolant passage on the mixing loss is analyzed. For a model turbine stage with nozzle cooling, parametric analyses are carried out to investigate the effect of main design variables(coolant mass flow ratio, temperature and ejection area) on the stage performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.8
• /
• pp.1190-1200
• /
• 1993

In this work, the performance of both delay sensitive traffics and loss sensitive traffics of the output buffered ATM switch with priority control mechanisms has been evaluated. We choose the partial buffer sharing mechanism as the loss priority control mechanism and the HOL(Head Of Line) priority control mechanism as the time priority control mechanism. We model loss sensitive traffics with Poisson process and delay sensitive traffics with MMPP. With loss priority control, it is confirmed that loss probability of loss sensitive traffice decreases when the loss priority control mechanism is chosen. With time priority control, it has also been confirmed that mean cell delay of delay sensitive traffics decreases when the HOL priority control mechanism is used. From this analysis, It has been confirmed that the requirements of QOS for both loss sensitive and delay sensitive traffics can be satisfied in the ATM switch by combining both the loss priority control mechanism and the HOL priority control mechanism.

• Safety and Health at Work
• /
• v.11 no.2
• /
• pp.199-206
• /
• 2020

Background: In a wide range of industries, noise-induced hearing loss remains one of the most prevalent occupational problems. This study aimed to assess the noise exposure level and associated factors of hearing loss among textile workers in Yangon Region, Myanmar. Methods: A cross-sectional study was conducted at a Textile mill (Thamine), Yangon Region, from April to December 2018. In total, 226 workers who were randomly selected from 3 weaving sections participated in face-to-face interviews using a structured questionnaire. A digital sound level meter and pure-tone audiometer were used for the assessment of noise exposure level and hearing loss, respectively. Logistic regression analysis was performed to assess the associated factors of hearing loss. Results: In total workers, 66.4% were exposed to ≥85 dB(A) of noise exposure, and the prevalence of hearing loss was 25.7%. Age ≥35 years, below high school education, hearing difficulty, tinnitus, hypertension, > 9 years of service duration in a textile mill were positively associated with hearing loss. After adjusting confounding factors, age ≥35 years (adjusted odds ratio = 6.90, 95% confidence interval = 3.45-13.82) and tinnitus (adjusted odds ratio = 2.88, 95% confidence interval = 1.13-7.37) were persistently associated with hearing loss. Conclusion: Providing occupational hazard education and enforcement of occupational safety regulations should be taken to decrease the noise exposure level. The regular audiometry test should be conducted for assessment of hearing threshold shift. The employer needs to implement a hearing conservation program in workplace when noise exposure reaches or exceeds 85 dB(A) for 8 hours.

• Journal of the Korean Society of Costume
• /
• v.55 no.7 s.98
• /
• pp.156-170
• /
• 2005

As contemporary art tends to diverge from its fixed genres and intends to appeal to the public, fashion comes to contribute to the contemporary art area, by playing an important part in the creation of artistic value of art work. Nowadays, it is not unusual to see fashion work shown in an art exhibition parallel with art work, since some artists adopt costumes as the medium of their work in order to explore various means of expression. The occurrence of philosophical, sociological theories concerning human body parallelled with the prevalence of the post-structuralist ideas and occurrence of various styles of artistic expressions of body encouraged active research and attracted social attention to body. With such background, fashion art was formed by a means of the integration of body and fashion in order to create extreme artistic expression. 1 intend to investigate a variety of trends in fashion art from the viewpoint of body space. This study developed criteria for fashion image in contemporary art. Those criteria are based on the dichotomy that divides body into inner aspects and outer aspects. According to the criteria, Firstly, the extension type of body shape includes enlargement and reduction as its sub-types. Secondly, the opening-closure type includes opening type and closure type as its sub-types. Thirdly, the intensity type categorizes clothes into uniqueness and hybridity. Dynamism type classifies fashion art into fixation and moving. The various expressions of clothes type are interpreted as a means by which we can criticize many phenomena of modern society, such as loss of humanity, isolation of individuals, loss of identity, commercialism, and materialism. In the latter period of modern society, the integration of the double-faced nature of body and spirit was attempted and popular fashion was introduced into art in order to express desire, death, gender, identity, and sexual pleasure.