• 제목/요약/키워드: Work Flow

검색결과 2,756건 처리시간 0.029초

후류중에 있는 수중운동체의 캐비테이션 유동 현상 및 유체력 변화 해석 코드 개발 (NUMERICAL CODE DEVELOPMENT OF THE MULTIPHASE FLOW AROUND AN UNDERWATER VEHICLE UNDER SUBMARINE WAKE.)

  • 박수일;하콩투;박원규;이건철
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2010년 춘계학술대회논문집
    • /
    • pp.115-121
    • /
    • 2010
  • Cavitating flow is widely shown in many engineering systems, such as marine propellers, pump impellers, nozzles, injectors, torpedoes, etc. The present work focuses on the numerical analysis of the multiphase flow around the underwater vehicle which was launched from a submarine. The governing equation is the Navier-Stokes equation with a homogeneous mixture mode. The multiphase flow solver uses an implicit preconditioning scheme in curvilinear coordinate. For the code validation, the results from the present work are compared with the existing experimental and numerical results, and a reasonably good agrements are obtained. The multiphase flow around an underwater vehicle is simulated which includes submarine wake effects.

  • PDF

Physics-based modelling for a closed form solution for flow angle estimation

  • Lerro, Angelo
    • Advances in aircraft and spacecraft science
    • /
    • 제8권4호
    • /
    • pp.273-287
    • /
    • 2021
  • Model-based, data-driven and physics-based approaches represent the state-of-the-art techniques to estimate the aircraft flow angles, angle-of-attack and angle-of-sideslip, in avionics. Thanks to sensor fusion techniques, a synthetic sensor is able to provide estimation of flow angles without any dedicated physical sensors. The work deals with a physics-based scheme derived from flight mechanic theory that leads to a nonlinear flow angle model. Even though several solvers can be adopted, nonlinear models can be replaced with less accurate but straightforward ones in practical applications. The present work proposes a linearisation to obtain the flow angles' closed form solution that is verified using a flight simulator. The main objective of the paper, in fact, is to analyse the estimation degradation using the proposed closed form solutions with respect to the nonlinear scheme. Moreover, flight conditions, where the proposed closed form solutions are not applicable, are identified.

지속가능한 공급사슬(Supply Chain)을 위한 비즈니스 프로세스 모델 연구 (A Study on the Business Process Model for sustainable Supply Chain)

  • 안경림;이주연
    • 디지털산업정보학회논문지
    • /
    • 제10권1호
    • /
    • pp.181-193
    • /
    • 2014
  • The environment of supply chains is rapidly changed to global and eco-freindly work process. However, at current environment, it is not easy to grasp work flow and to analyze energy efficiency. Improving energy efficiency and visibility for goods flow can contribute to increases in customer attitudes and reductions in overall production costs Additionally, it can lead to increases in work efficiency and reductions in overall production costs. Until recently, efforts to improve energy performance focused on manufacturing industry. Those efforts have expanded to the supply chain. In this paper, we perform business process modeling about supply chain for visibility and sustainability - information and component flows - from assembly plants to logistics. This paper defines the work and information flows by modeling the underlying logical structures of the supply chain and the business processes that determine impact of visibility and sustainability. We model processes using the modeling methodology specified by UN/CEFACT. This methodology explains business process functionality and business transactions by UML diagram. The output of this paper would be useful in grasping work flow and capturing the used energy.

Developing a Data Model of Product Manufacturing Flow for an IC Packaging WIP System

  • Lin, Long-Chin;Chen, Wen-Chin;Sun, Chin-Huang;Tsai, Chih-Hung
    • International Journal of Quality Innovation
    • /
    • 제6권3호
    • /
    • pp.70-94
    • /
    • 2005
  • The IC packaging industry heavily relies on shop floor information, necessitating the development of a model to flexibly define shop floor information and timely handle manufacturing data. This study presents a novel data model of product manufacturing flow to define shop floor information to effectively respond to accelerated developments in IC package industry. The proposed data model consists of four modules: operation template setup, general process setup, enhanced bill of manufacture (EBOMfr) setup, and work-order process setup. The data model can flexibly define the required shop floor information and decision rules for shop floor product manufacturing flow, allowing one to easily adopt changes of the product and on the shop floor. However, to handle floor dynamics of the IC packaging industry, this work also proposes a WIP (i.e. work-in-process) system for monitoring and controlling the product manufacturing flow on the shop floor. The WIP system integrates the data model with a WIP execution module. Furthermore, an illustrative example, the MIRL WIP System, developed by Mechanical Industrial Research Laboratories of Industrial Technology Research Institute, demonstrates the effectiveness of the proposed model.

생산계획 및 우선순위규칙에 따른 Order Release 정책의 유효성에 관한 연구 (The Effectiveness of Order Release Strategies considering Production Plan and Dispatching Rules)

  • 최병대;이기창;박찬권;박진우
    • 한국시뮬레이션학회논문지
    • /
    • 제8권4호
    • /
    • pp.73-87
    • /
    • 1999
  • Order Review/Release (ORR) System is the linkage between planning system and actual production. Reduction of the waiting time on the machines, work in process and lead time variation may be achieved by adopting ORR strategies. But researchers on the ORR do not agree on the effectiveness of ORR. Some say that the overall system flow time may be increased if ORR is adopted, but others say that ORR can reduce work in process, flow time and variation of flow time. The objective of this research is to clarify under what environments order release strategy is effective. Simulation study was conducted in a hypothetical job shop. The experimental results show that dispatching rule is much more important than ORR is in controlling the shop floor. But the results indicate that ORR can reduce mean shop flow time, average work in process and variation of shop flow time under such environments where utilization level is high and planned order is weekly released to the order pool. And the results also show that the effect of plan smoothing on the ORR is insignificant, which is inconsistent with the results of the previous researches.

  • PDF

다자간 협동 공학설계를 위한 DCWA 시스템의 설계 및 구현 (Design and Implementation of Distributed Collaborative Writing System for Engineering Design Process)

  • 이병걸
    • 한국멀티미디어학회논문지
    • /
    • 제3권1호
    • /
    • pp.63-76
    • /
    • 2000
  • 기존의 CSCW (Computer Supported Collaborative Work) 시스템은 단순히 문서나 메시지를 구성하고 전달하는 기능만을 지원할 뿐 협동 작업자들간의 조직구성, 업무분할 및 통합, 작업흐름 제어와 같은 인지학적 기능등은 효과적으로 반영하지 못하고 있다. 본 연구는 협동작업환경에서의 CAD(Computer Aided Design)/CASE(Computer Aided Software Engineering)와 같은 공학 디자인 프로세스를 인지학적으로 지원하기 위한 CSCW 시스템을 개발하는 데 그 목적이 있다. 제안된 DCWA (Distributed Collaborative Writing Aid) 시스템은 CAD/CASE 및 시뮬레이션 기능을 하나의 시스템으로 통합함으로써 조직구성, 업무분할, 작업흐름제어가 이들 기능에 통일적으로 적용될 수 잇도록 하였다. 특히 CAD 도구에서는 다중 사용자들 소유의 그림객체 간의 바인딩, 어태치먼트, 스케일링 기능들은 제공하여 결합 형태 및 정도를 나타내는 관계성 표현이 가능하도록 함으로써 업무분할 및 병합이 CAD 도구에서도 명확히 드러나도록 하였고, CASE 도구에서는 소프트웨어 시뮬레이션 기능과 연계하여 작업흐름 제어가 용이하도록 하였다. 이는 또한 제품을 생산하기 전에 미리 모형을 시뮬레이션 해봄으로써 제품 개발의 시간과 비용을 단축할 수 있는 효과를 가져다 준다.

  • PDF

비 작업보존형 라운드로빈 스케줄러 (Non-Work Conserving Round Robin Schedulers)

  • 정진우
    • 한국정보통신학회논문지
    • /
    • 제9권8호
    • /
    • pp.1663-1668
    • /
    • 2005
  • 패킷 스위칭 네트워크에서의 QoS 보장을 위한 많은 연구가 지난 10여 년간 진행되었다. 이들 중 많은 수가 IntServs 기반의 플로우별 대역폭 할당과 보장을 위한 여러 가지 시그널링, 스케줄링 방법에 관한 것이나, 구현의 복잡성으로 인해 실제 네트워크에서 실현된 예가 드물다. 이러한 복잡성을 극복하기 위해서 최근 플로우 통합 (Flow Aggregation)이 제안된 바 있다. 통합된 플로우 기반의 스케줄링을 통해 지연시간을 보장해주기 위해서는 플로우 간의 공정한 통합이 요구되며, 이를 위해서 스케줄러가 비 작업보존방식으로 동작해야 한다. 본고에서는 가장 간단하면서 별리 쓰이는 스케줄링 기법인 Deficit Round Robin을 변형한, 비 작업보존 방식의 Round Robin with Virtual Flow (RRVF)를 제안하고 이를 바탕으로 공정한 플로우간 통합을 시도하였다. RRVF가 보장하는 지연시간 최대치를 연구하였으며 이를 적용한 플로우 통합시의 지연시간 최대치를 구하였다. 이를 통해 RRVF로 플로우를 통합하는 경우 대역폭 할당이 간단해짐과 동시에 네트워크 전체의 지연시간도 줄어드는 것을 알아내었다.

Thermodynamic and Aerodynamic Meanline Analysis of Wet Compression in a Centrifugal Compressor

  • Kang, Jeong-Seek;Cha, Bong-Jun;Yang, Soo-Seok
    • Journal of Mechanical Science and Technology
    • /
    • 제20권9호
    • /
    • pp.1475-1482
    • /
    • 2006
  • Wet compression means the injection of water droplets into the compressor of gas turbines. This method decreases the compression work and increases the turbine output by decreasing the compressor exit temperature through the evaporation of water droplets inside the compressor. Researches on wet compression, up to now, have been focused on the thermodynamic analysis of wet compression where the decrease in exit flow temperature and compression work is demonstrated. This paper provides thermodynamic and aerodynamic analysis on wet compression in a centrifugal compressor for a microturbine. The meanline dry compression performance analysis of centrifugal compressor is coupled with the thermodynamic equation of wet compression to get the meanline performance of wet compression. The most influencing parameter in the analysis is the evaporative rate of water droplets. It is found that the impeller exit flow temperature and compression work decreases as the evaporative rate increases. And the exit flow angle decreases as the evaporative rate increases.

물류량을 고려한 마감공사 자재운반의 실시간 경로탐색 최적화 연구 (Optimization of real-time path finding for material handling of finishing work considering the logistics flow)

  • 김완섭;이동민;김태훈;조훈희;강경인
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2015년도 추계 학술논문 발표대회
    • /
    • pp.170-171
    • /
    • 2015
  • Resource procurement and material handling are considered as a significant part of construction project especially in large or tall building construction site. There are multiple variables that must be considered in a construction site during finishing work such as movement of materials, equipments, and workers. Therefore, it is difficult for construction workers to find the material handling path solely by intuition. The aim of this study is to propose a real-time path finding model suitable for complicated logistics flow in the field. The model explores the optimal transport path of finishing material with its basis on optimization algorithm, and it determines the direction of the Smart Sign. The proposed model is expected to be utilized for planning of efficient finishing material handling.

  • PDF

Web WorkFlow를 이용한 연구개발 공정 및 연구결과물 의사결정지원시스템 (Decision Support System for R&D Processing and Research Results Using the Web WorkFlow)

  • 정관성;이용범;장원표;한도희
    • 한국경영과학회:학술대회논문집
    • /
    • 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
    • /
    • pp.575-578
    • /
    • 2002
  • 원자력 중장기 연구개발 일환으로 수행중인 액체금속로 설계기술개발 프로젝트는 개념 설계분야와 기반기술구축 분야로 구성되어 있는 상호 긴밀한 연계가 강조되기 프로젝트이다. 대과제를 중심으로 각 세부과제 및 분야 내에서 시스템별 인터페이스 등이 종합적으로 관리되어야 할 필요성이 있는 프로젝트이다. 액체금속로 설계기술개발 프로젝트의 연구생산성 향상을 위해 공정계획을 수립하고, 프로젝트 수행 중에 산출되는 연구결과물을 검증하여, 검증된 자료를 프로젝트 수행원들에게 공유할 수 있게 Web WorkFlow를 이용한 자료 검증/공유시스템을 개발하여 운영하고 있으며, 최종적으로 검증된 자료는 데이터베이스를 구축하여 활용하고 있다. 이렇게 함으로써 한국원자력연구소에서 개발증인 액체금속로 설계 기술개발 프로젝트를 최적화된 계획 및 관리를 통하여 연구개발을 수행할 수 있을 것으로 예상된다.

  • PDF