• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권4호
• /
• pp.67-76
• /
• 2020

Polycyclic aromatic hydrocarbons (PAHs) are organic compounds that tend to persist in environmental media for a long period of time. This work presents a 2-year monitoring study of occurrence of three PAHs (benzo(a)pyrene, naphthalene, and fluoranthene) in groundwater. The groundwater samples were collected from 106 sites of nation's groundwater quality monitoring network and analyzed by simultaneous analysis method to quantify the concentrations of the PAHs. Benzo(a)pyrene was not detected in all samples. Naphthalene and fluoranthene concentrations ranged from not detected to 12.8 ng/L and not detected to 10.5 ng/L with their detection frequency being 57.8 and 4.2%, respectively. The concentrations of PAHs in ground- and drinking waters are not currently regulated in Korea, but the concentration levels of naphthalene and fluoranthene found in this work were lower than the regulatory limits of other countries (naphthalene 0.001~0.07 mg/L, fluoranthene 0.001~1.4 mg/L). The monitoring result of this study revealed that PAHs exist as trace amounts in domestic groundwater, however continuos monitoring is necessary to protect groundwater from PAHs contamination with growing industrialization and urbanization.

• 한국안전학회지
• /
• 제28권5호
• /
• pp.78-82
• /
• 2013

The purpose of this study is to review the labor force partitpation rate and work environment characteristics of female workers to provide basic information for establishment and implementation of effective policies related to accident prevention and workers health protection for female workers. It was analyzed employment status, work environment and injuries and illnesses based on economic activity census results, compensation of industrial injury and the second working condition survey. According to economic activity census results, female labor force participation rate has been steadily increased, whereas male labor force participation rate has been decreased since 1970. Industrial accident rate has been declined in male workers but that in female workers has been steadily increased even though male workers were higher accident rate than female workers. It was evaluated that female workers are vulnerable to industrial injuries and illnesses in the aspect of their working environment and employment status. Also, Substantial differences between female and male workers in occupational exposure patterns, occupational disease and occupational environments were observed. Therefore it was recommended that special care programs for female workers such as a specialized monitoring and management program should be introduced in the near future.

• 한국동물위생학회지
• /
• 제36권3호
• /
• pp.203-208
• /
• 2013

This survey was conducted to evaluate the microbial contamination level of butcher's shops in Seoul, Korea. For microbial inspections, a total of 584 samples (146 cotton work gloves, 146 utensils and equipments, 154 beef samples, 138 pork samples) were collected from butcher's shops. E. coli and pathogenic bacteria such as Staphylococcus aureus, Yersinia enterocolitica, Listeria monocytogenes, Salmonella spp., and E. coli O157:H7 were tested in the samples. As a result, the level of aerobic plate count (APC) ranged ${\leq}10^4\;CFU/cm^2$ from utensils and equipments, $10^1{\sim}10^9$ CFU/glove from cotton work gloves and ${\leq}10^6$ CFU/g from meat. The APC level of E. coli ranged ${\leq}10^1\;CFU/cm^2$ from utensils and equipments, ${\leq}10^5$ CFU/glove from cotton work gloves, and ${\leq}10^3$ CFU/g from meat, respectively. Staphylococcus aureus was detected in 2 beef samples, 1 pork sample, and 10 used cotton work gloves. Yersinia enterocolitica was detected in 3 beef samples, 1 pork sample, and 3 used cotton work gloves. Listeria monocytogenes was detected in 2 used cotton work gloves. In order to improve the sanitation status of butcher's shops, application of HACCP (Hazard Analysis Critical Control Point) or SSOP (Sanitation Standard Operating Procedure), regular hygiene education, and continuous monitoring for microorganisms will be required.

• Smart Structures and Systems
• /
• 제16권4호
• /
• pp.607-621
• /
• 2015

Wireless sensor technology has been opened up numerous opportunities to advanced health and maintenance monitoring of civil infrastructure. Compare to the traditional tactics, it offers a better way of providing relevant information regarding the condition of building structure health at a lower price. Numerous domestic buildings, especially longer-span buildings have a low frequency response and challenging to measure using deployed numbers of sensors. The way the sensor nodes are connected plays an important role in providing the signals with required strengths. Out of many topologies, the dense and sparse topologies wireless sensor network were extensively used in sensor network applications for collecting health information. However, it is still unclear which topology is better for obtaining health information in terms of greatest components, node's size and degree. Theoretical and computational issues arising in the selection of the optimum topology sensor network for estimating coverage area with sensor placement in building structural monitoring are addressed. This work is an attempt to fill this gap in high-rise building structural health monitoring application. The result shows that, the sparse topology sensor network provides better performance compared with the dense topology network and would be a good choice for monitoring high-rise building structural health damage.

• 한국산업보건학회지
• /
• 제5권1호
• /
• pp.87-103
• /
• 1995

Since being granted permission for self-assessment of the work environment by the Department of Labor in 1992, POSCO's Industrial Hygiene Laboratory has participated in domestic and Foreign Quality Control Programs 8 times and has obtained remarkable results. It has made a lot of effort to be a proficient laboratory with the ability to observe and analyse environmental monitoring data. The summary of results is as follows: 1. POSCO's Industrial Hygiene Laboratory has received a "P(Proficient)" grade from the round 115 to round 119 of AIHA/NIOSH PAT Program for analysis of such metals as lead, cadmium, zinc, and chromium, and also has received a "P(Proficient)" grade from its round 119 of for organic solvent analysis, i,e,. Trichloroethylene(TCE), Carbon Tetr-achloride(CTC), 1,2-Dichloroethane(DCE), 1,1,1-Trichloroethane(MCM), Tetrachloroethylene (PCE), Chloroform(CFM), Benzene(BNZ), toluene(TOL), and O-xylene(OXY). 2. In the Quality Control Evaluation Program performed by the Industrial Health Research Institute,Korea Industrial Safety Corporation, POSCO has passed impressively in the3-metal analysis test for lead, cadmium, cupper, and in the 6 organic solvent analysis test for Benzene(BNZ), toluene(TOL), O-xylene(OXY), Trichloroethylene(TCE) and Methyl isobutyl keton(MIBK), n-Hexane with 2 standard deviations. These analytic techniques should be practically applied to various fields, and reliable results of environmental monitoring should be considered to improve the work environment and to keep workers from occupation related diseases.

• 한국컴퓨터정보학회논문지
• /
• 제22권5호
• /
• pp.97-103
• /
• 2017

In this paper, we propose a method to investigate the safety consciousness of a analyst incident response. This study conducted a statistical survey on 154 analysts who hired as expert in environment monitoring organizations in South Korea. The results of the analyses showed that respondents had good awareness on the equipment incident response and complied with laboratory safety regulations very well. Secondly, respondents were aware of the importance in the order of equipment incident response, an analytical laboratory incident response, and the cause of a chemical substance associated incident in an analytical laboratory in regarding the regulation compliance for creating a safe laboratory environment and the securement of laboratory safety. Therefore, (it was identified that) it would be necessary to create a safe environment and integrate a safety management system.

• 한국항해항만학회지
• /
• 제27권1호
• /
• pp.87-95
• /
• 2003

해저 광테이블 공사는 해양조사, PLGR(Pre Lay Grapnel Run), 천해부공사, 포설/매설 순서로 이루어진다. PLGR은 케이블의 해저면 안착을 용이하게 하고, Plough 및 ROV(Remotely-Operated Vehicle)매설작업의 성능을 향상시키며, 매설 장비를 보호하기 위한 작업이다. 본 논문은 해저 광테이블 건설 작업 중에서 PLGR 작업을 효율적으로 관리할 수 있는 실시간 모니터링 시스템의 설계 및 구현에 대해서 논한다. 본 논문에서는 이를 위하여 전체적인 실시간 모니터링 시스템을 설계하고, 시리얼 멀티포트 통신 모듈, 실시간 처리 모듈, 환경 설정 모듈, 그리고 그래프 및 프린터 출력 모듈을 설계 및 구현하였다. 끝으로 본 논문의 타당성 검토를 위하여 시리얼 멀티포트 통신, 실시간 데이터 추출, 그래프 출력을 실험하였다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제19권E3호
• /
• pp.99-120
• /
• 2003

Visibility impairment in an urban area is mainly caused by airborne fine particulate matters. Visibility in a clean air environment is more sensitive to the change of PM$_{2.5}$ particle concentrations. However, a proportionally larger reduction in fine particle concentration is needed to achieve a small increment of visibility improvement in polluted areas. Continuous optical monitoring of atmospheric visibility and extensive aerosol measurements have been made in the urban atmosphere of Kwangju, Korea. The mean for fine particulate mass from 1999 to 2002 at Kwangju was measured to be 23.6$\pm$20.3 $\mu\textrm{g}$/㎥. The daily average seasonal visual range was measured to be 13.1, 9.2, 11.0, and 13.9 km in spring, summer, fall, and winter, respectively. The mean light extinction budgets by sulfate, nitrate, organic carbon, and elemental carbon aerosol were observed to be 27, 14, 22, and 12%, respectively. It is highly recommended that a new visibility standard and/or a fine particle standard be established in order to protect the health and welfare of general public. Much more work needs to be done in visibility studies, including long-term monitoring of visibility, improvement of visibility models, and formulating integrated strategies for managing fine particles to mitigate the visibility impairment and climate change.e.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1884-1887
• /
• 1997

The increasing concern over radiation exposure in the nuclear industry has fostered agrressive efforts to reduce the levels of radiation exposure. One area of the effot to reduce the radiation exposure is the development of a remote radiation monitoring system. Remote radiation monitoring can serve many benificaial functions reduce exposure to radiation by plant personnel, impruve the quality of the data that is collected and recognize the radiation environment easily. Radiation mapping system gives a good information that represents radiation level distribution. The system we have developed consists of a data acquistion parts, mobile robot and remote control parts. Data acquisition parts consist of radiation detection module and vision acquistion module which collect radiation data, visiion data and distance information. In remote control parts, the acquision data are processed and displayed. We have constructed radiation mapping image by overlaying the vision and radiation data. The radiation mapping techniques for displaying the results of the survey in an easily comprehendable form will facilitate a better understanding of the radiation environment in the facility. This system can reduce workers radiation exposure and aid to help work plan, so it has significant benifits in cost and safety.

• Advances in environmental research
• /
• 제3권1호
• /
• pp.87-106
• /
• 2014

The concern for the global environment ensues researchers from various disciplines to work in collaboration to tackle with the issues of sustainability and environmental conservation for well-being of the people. In this study, we have selected and focused on few basic environment-effecting factors such as temperature, humidity, carbon dioxide and oxygen concentration level and referred them as meteorological data. In this paper, we present the development of our own customized hardware setup, environmental monitoring device (EMD) to obtain the data. Utilizing the relationship among these basic parameters, represented in the form of formulas and equations, we tried to encode them using Matlab programming. Data visualization is achieved by plotting the graphs of basic parameters obtained from EMD as well for the derivatives using Matlab programs.