• 한국농촌생활과학회지
• /
• 제7권2호
• /
• pp.121-128
• /
• 1996

This study was performed to define the effects of Far Infrared Ray Radiation Fabrics as summer garments during outdoor work by human trial. One healthy male subject was volunteered for this study. Experimental garments consisted of three kinds of trousers (Cotton, Cotton/linen blended, Far Infrared Ray Radiation Fabric/wool blended) and basic garments (panty, socks, shirts, and dress shirts). The measurements were rectal temp., skin temp., microclimate inside clothing, heart rate, subjective sensation etc. The results were as follows : 1. Rectal temperature showed the lowest in Far Infrared Ray Radiation Fabrics among 3 garments. 2. Skin temperature (forehead, chest abdomen temp.) and mean skin temperature were lower in Far Infrared Ray Radiation Fabrics than in others, especially during early stage of work. 3. Heart rate showed lower value in Far Infrared Ray Radiation Fabrics than in others but there was no significance among the garments. 4. Humidity inside clothing and total weight loss showed the highest value in Far Infrared Ray Radiation Fabrics.

• 보존과학회지
• /
• 제36권4호
• /
• pp.236-243
• /
• 2020

In this study, an accelerated aging experiment for fabric and paper was conducted using two light emitting diode(LED) sources with different wavelength characteristics, and the discoloration under each lighting type was examined. Hanji(Korean traditional paper) and related textiles showed more discoloration under blue LEDs, while the blue wool standard showed more discoloration under white LEDs. This, indicated that the deterioration varied depending on the sample color. The the effect of the light source on artifact deterioration was primarily related to the total radiation flux(expressed in mill watts), rather than the total luminous flux(expressed in lumens). In addition, the discoloration of the investigated artifacts was dependent on the color rendering of the lighting.

• 한국의류학회지
• /
• 제23권8호
• /
• pp.1098-1109
• /
• 1999

This study was to examine the effects of textiles materials and wearing types on the thermal regulation responses of human, Cotton polyester wool silk and rayon were chosen as outerwears and acetate was selected as a lining. Blouse-skirt suits blouse-slacks suits and one-piece dress made of selected textiles were examined by human trials, Tests results were as follows ; 1 When subjects wore vlouse-slacks suits Tmsk was showed the highest value. There was a significant difference on Tmsk(p<0.05) when they wore one-piece dress. The temperature of microclimate inside clothing when subjects wore blouse-slacks suits showed the highest value and one-piece dress and then blouse-skirt suits in order. For blouse-skirt suits clothing without lining showed higher temperature of the back of microclimate inside clothing than clothing with lining except cotton(p<0.1) 2. There were no significant consistency of the increasing rates of thermal insulation of garment at fabric test and human trials among polyesterand silk.

• 한국의류학회지
• /
• 제27권12호
• /
• pp.1359-1367
• /
• 2003

본 연구에서는 실제 의복 관리와 생산 면에서 접할 수 있는 모 직물의 접착심과의 접착 후, 프레싱 처리 후, 드라이클리닝 및 프레스로 처리 후 직물의 형태안정성과 의복형성능의 변화를 살펴보았다. 겉감으로는 신사복 춘하용 모 100% 또는 모 혼방 직물 15종류를 사용하였으며 심지로는 신사복에 많이 쓰이는 3종류 심지를 사용하였다. FAST시스템과 KES시스템을 이용하여 직물의 접착 후, 프레싱 처리 후, 드라이크리닝과 프레싱 처리 후의 형태안정성과 의복형성능의 변화를 시험하였으며 다음과 같은 결과를 얻었다. 1) 모직물의 형태안정성에서 주요인자인 습윤팽창(HE)은 접착으로 크게 감소하였고 프레싱 처리와 드라이크리닝과 프레싱 처리 후는 접착 후보다 큰 변화를 보이지 않는다. 모직물의 습윤팽창(HE)의 조절시 접착심이 습윤팽창(HE)의 안정성에서 중요한 역할을 하는 것으로 나타났다. 2) 완화수축(RS)은 접착 후 조금 감소하였으나 큰 변화를 보이지 않고 프레싱 처리 후 현저한 감소를 보인다. 드라이크리닝과 프레싱 처리 후는 직물이 수축하고 볼륨감이 생김으로 완화수축(RS)은 더욱 감소하였다. 모직물의 완화수축(RS)의 조절시 프레싱이 중요한 역할을 하는 것으로 나타났다. 3) 모직물의 의복형성능(TAV)은 접착으로 크게 향상되었다. 드라이크리닝과 프레싱 처리 후 직물이 좀더 부드러워지고 볼륨감이 생기면서 의복형성능(TAV)은 적게 향상됨을 보인다. 이와 같이 3가지 처리는 서로 보완되어 모직물의 형태안정성과 의복형성능을 향상시키는 것으로 나타났다.

• 한국의상디자인학회지
• /
• 제12권2호
• /
• pp.131-138
• /
• 2010

The purposes of this study are for current manufacturing status of the formal knit slacks for the middle aged women. As for the methodology, five manufacturers specializing in formal knitwear brands were subjected to the study, to examine the current manufacturing status of the knit slacks for the middle aged women, by conducting interviews and questionnaire with patterner and designer. The questionnaire items are 20 ones including general questions on manufacturing of the knit slacks, questions on materials used in manufacturing, and on sewing. The results are as followings : First, as for the manufacturing structure of the knit slacks manufacturer, all manufacturers directly manufactured knit slacks in their own factory, and the manufacturing was comprised of 10% in woven slacks and 90% in knit slacks. Second, as for the type of yarn mostly used in fabric knitting for the knit slacks, wool was used mostly for F/W, and acrylic or Saint yarn for S/S. As for the types of knit, Milano rib stitch and Half Milano rib stitch were used for wool and acrylic knitting, and plain stitch was used for Saint yarn. As for the gauge, 12G and 14G were used, whereas 7G, 12G was used for Saint yarn. Repair requests of the knit slacks were mostly on the length of the pants, such as shortening hip circumference and crotch length, or widening waist and hip area. The study shows that the size of knit slacks did not fit the body type of customers.

• 한국환경보건학회지
• /
• 제43권2호
• /
• pp.95-102
• /
• 2017

Objectives: This study was conducted to evaluate the emission of VOCs from clothing that had been dry cleaned. Methods: In order to ensure the same conditions, f100% wool scarves were selected as the fabric type. Four identical tests were conducted on the option of either removing the plastic bags which came from the dry cleaning shop or not. The scarf was located inside a closet or room for one or two days. Small chamber tests were conducted to determine the VOC emission characteristics under the same conditions such as temperature, humidity, loading factor, and air exchange rates. Air from the chamber for VOCs was sampled by Tenax TA tube and analyzed by thermal desorption and GC/MSD. Results: Assuming that test represented dry cleaning and consumer's conditions well enough, we can conclude that immediate emissions after the dry cleaning of the scarfs caused elevated levels of TVOC, five VOCs (benzene, toluene, ethylbenzene, xylene, stylene), and decane group compounds. Conclusions: By removing the plastic bags which came from the dry cleaning shop or not, the storage conditions of dry cleaned scarfs by consumers during the storage time periods (one to three days) would be significant for reducing VOC emissions.

• 복식문화연구
• /
• 제18권2호
• /
• pp.371-381
• /
• 2010

The pine needles can be used for four seasons in normal living and it can be taken friendly everywhere as it is distributed over 50% in Korea. The pine needles consist of vitamins, protein, minerals, essential oil and enzyme related to antimicrobial activity. It has effect like high blood pressure, neuralgia and hanged over by terpene, glucokinin, rutin, apigenic acid and tannin. Also the extract of them can be used for dyeing of fabrics. However, the extract components and effects of them are not well known yet. Therefore, the purpose of this study was to investigate the volatile components of the pine needles extract and functionality. The pine needles extract was dyed into various fabrics(nylon, silk, wool and soybean) and mordanted with Al, Cu, Cr, Fe and Sn. The extracted aroma compounds were compared by gas chromatography-mass spectrometry. The major volatile compounds of pine needles verified by using SPME were alpha-pinene, beta-pinene, beta-phellandrene, caryophyllene, ethanon, benzen. A total of 15 compounds were identified by using the SPME fibers. In the UV-visible spectra, the maximum absorption of wavelength of the pine needles ethanol extract appeared at 460, 630nm for chlorophyll component and at 237, 281nm for tannin component with the pine needles distilled water extract. Most of sample showed high antibacterial effect in none mordant but wool fabric showed high antibacterial effect in mordants. The result of UV block test showed a superior ability of blocking ultraviolet ray infiltration in all sample.

• 한국의류산업학회지
• /
• 제14권4호
• /
• pp.629-634
• /
• 2012

Knitted fabric using acrylic/wool blended yarn (A/W) is increasingly used in the knit industry; subsequently, research on knitted fabric using A/W has increased. This study presents an scientific database from evaluating physical properties of $1{\times}1$ rib stitch using A/W. In this study,$1{\times}1$ rib stitch using A/W were made at various knitting tensions (dial no. 2-6) and the number (4-6) of ply yarn. The physical properties of $1{\times}1$ rib stitch using A/W were measured and analyzed. The density was in the range 5.5-6.4 wales/cm and 4.0-5.6 courses/cm, respectively. The density increased when less plying yarns and more knitting tension were added during knitting. The thickness was in the range of 1.592-2.362 mm and the tensile strength was in the range 32.75-53.63 Kgf/mm. The burst strength was in the range 107.8-139.2 $N/cm^2$. Thickness, tensile strength, and burst strength increased as the number of ply yarn and the knitting tension increased. The elongation and the recovery extension rate were in the range 102.29-112.13% and 96.4-97.7%, respectively. The heat retention rate was in the range 59.3-65.1%. There was no difference of the elongation and the recovery extension rate and the heat retention rate by the knitting tension and the number of the ply yarn. The permeability was in the range 170.5-396.3 $cm^3/cm^2/sec$. Air permeability decreased as the number of ply yarn and the knitting tension increased. The pilling properties were excellent for all $1{\times}1$ rib stitches.

• 복식
• /
• 제61권1호
• /
• pp.69-83
• /
• 2011

This study applied cartoon-like simple and implicit symbol of Keith Haring works to tubular jacquard knit, designed woman casual knit wear with fun, explicit and activities using fluorescent yarns with explicit features. This study aimed to propose the directions for new market pioneering that meets the emotional requirements of modern people by raising the level of utilization and expression area of knit fashion, and to present the constructive directions for high value-added knit wear by designing highly effective knit wear. Methods of this study examined the lifetime and artistic background of Keith Haring and collected his works through searching of internet, scholastic publications or thesis. Formative types and colors of works collected were analyzed and classified according to characteristic standards of Haring and characteristic formativeness and color of works were extracted. The result of this study is as shown below: First, the feature of his works can be summarized into motif that has symbolic and implicit cartoon-like lines including narratives as well as enormous number of works. Such feature is very suitable for variation and recombination in realization of design and has unlimited potentials for development. Second, image colors can be extracted such as black and white, original color and fluorescent paints, which reflects the intention of artist who put focus on communication with the public. Such color feature is very suitable for design motif that has explicitness of reflecting the intention of artist through use of special fluorescent yarn. Third, I made it as reversible wear that has effects of increasing or decreasing the explicitness according to color area ratio using the feature of textures allowing use of both sides as well as form stability of tubular jacquard. Fourth, by adjusting the thickness of fabric with controlling of ply in fabric using poly yarn and wool union yarn, I could obtain good results of study in terms of technique that can express various materials with embossed dynamic effects of unevenness on flat surface.

• 복식
• /
• 제63권1호
• /
• pp.147-160
• /
• 2013

Korean fashion designs became important items in Korea in the middle of the 1980s, and it has advanced into the world market in the early part of the 1990s. To achieve success in global fashion world, it is necessary to analyze Korean fashion design thoroughly and prepare strategies to develop designs with mainstream acceptance in the global fashion world. The purpose of this study is to analyze the aesthetic characteristics and Korean beauties of Korean fashion designs. Fashion photos of Korean fashion designs from 2006 S/S to 2012 F/W were analyzed. 357 designs from 608 designs of 4 representative Korean designers were examined and design characteristics, expression styles were studied. The major conclusions of the study are as follows : 1. H Line, slim, fitted silhouette and loose look were applied. 2. 5 major traditional colors, red, blue, yellow, white and black colors were used. Brown color, neutral color, golden color and beige color of the textile material's original color were used. Traditional textile materials like ramie fabric, satin and cotton, wool and metallic fabric were used. 3. Patterns of flower, traditional pattern and Korean letters were applied. Embroidery, patchwork and mother-of-pearl were decorated. 4. The three types of beauty were natural beauty, moderate beauty and decorative beauty. The types that were analyzed were realistic expression type, moderate expression type, image expression type and mixed expression type. To be accepted in global fashion world, Korean traditional design elements should be modified, broken down and reorganized so that Korean fashion design can be recreated.