• Structural Engineering and Mechanics
• /
• v.90 no.5
• /
• pp.447-458
• /
• 2024

This study investigated the influence of scale ratio and vertical load on the seismic performance of Puzuo joints in traditional Chinese timber structures. Three low-cyclic reversed loading tests were conducted on three scaled specimens of Bujian Puzuo in Yingxian Wooden Pagoda. This study focused on the deformation patterns and analyzed seismic performance under varying scale ratios and vertical loads. The results indicated that the slip and rotational deformations of Bujian Puzuo were the primary deformations. The scale of the specimen did not affect the layer where the maximum interlayer slip occurred, but it did decrease the proportion of slip deformation. Conversely, the reducing vertical load caused the layer with the maximum slippage and the position of the damaged Dou components to shift upward, and the proportion of slip deformation increased. When the vertical load was decreased by 3.7 times, the maximum horizontal bearing capacity under positive and negative loadings, initial stiffness, and energy dissipation of the specimen decreased by approximately 60%, 58.79%, 69.62%, and 57.93%, respectively. The horizontal bearing capacity under positive loading and energy dissipation of the specimen increased by 35.63% and 131.54%, when the specimen scale was doubled and the vertical load was increased by 15 times.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.100
• /
• pp.112-138
• /
• 2021

This paper mainly analyzes the records titled 'Shijujil(施主秩)' from the Bokjangs of each of the Rocana and Shakyamuni statues enshrined as wooden seated Vairocana Buddha Triadcomposed of Vairocana(center), Rocana(right), and Shakyamuni(left) at the Daeungjeon Hall of Hwaeomsa Temple in Gurye. The Shijujil from the Shakyamuni statue was recovered through Bokjang investigation in September 2015 and has been kept in the museum of Hwaeomsa as an undisclosed relic. After the discovery of the Shijujil from the Rocana statue through an Bokjang investigation in July 2020, both of the Shijujils were only officially released through the special exhibition 'Grand Hwaeomsa Temple in Jirisan Mountain' in September 2021. Existing documents recording on the creation of Buddha statues in the 17th century are in the form of sheets or rolls. However, the Shijujils take the form of simple stitched booklets. The Shijujil from Rocana consists of 19 chapters and 38 pages in one book, and the Shijujil from Shakyamuni consists of 11 chapters and 22 pages in one book. The contents of the Shijujils consist of the purpose of the Buddha statue creation, the creation date, the year and place of enshrining, the names of the statues, the people in charge and their roles, the sculptors, the list of items donated, and the list of the contributors. In addition, the list of monks who were staying at Hwaeomsa Temple at that time are also recorded, so the Shijujil is like a time capsule that tells the situation of Hwaeomsa Temple about 400 years ago. According to the records of the Shijujils and the Writing on the wooden pedestal of Rocana, the Vairocana Triad began to be in March 1634(12th year of King Injo) and was completed in August of that year, and was enshrined in the Daeungjeon Hall in the fall of the following year. It is very important to confirm that the Vairocana Buddha Triad of Hwaeomsa was created in 1634. Since studies on the reconstruction of Hwaeomsa Temple in the 17th century and the roles of Byeokam Gakseong have been mainly based on 『湖南道求禮縣智異山大華嚴寺事蹟』 written by monk Haean in 1636, it has been estimated that the wooden seated Vairocana Buddha Triad was created in 1636. However, it is now known that the Virocana Buddha Triad was created in 1634. The Shijujils are also a good source of information about Byeokam Gakseong who played a pivotal roles in the reconstruction projects of Hwaeomsa Temple in the 17th century. He played leading roles in rebuilding the East Five-story Stone Pagoda(1630), in creating the wooden seated Vairocana Buddha Triad(1634), and in producing the Yeongsanhoe Gwaebul(1653, Hanging Scroll Painting depicting the Shakyamuni preaching). It is also very important that the Shijujils are records that can reveal the relationship between Byeokam Gakseong and royal family of Joseon Dynasty in the 17th century. The Shijujils from Rocana and Shakyamuni are the first documents ever discovered in which the names of royal family members, such as Uichanggun(Gwang Lee, son of King Seonjo), Ikseong Shin(son-in-law of King Seonjo), and Crown Prince Sohyeon(son of King Injo) are recorded in detail in relation to the production of Buddha statues. The Shijujils from Rocana and Shakyamuni contain specific information about the production of the wooden seated Vairocana Buddha Triad in the 17th century, such as the year of production of the Buddha statues, the role of Byeokam Gakseong, and the relationship between Byeokam Gakseong and the royal family, so it is of great value not only for art history but also for historical studies of Hwaeomsa Temple.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.20 no.6
• /
• pp.131-137
• /
• 2018

The two recent excavations at the site of Beopsusa Temple in Seongju revealed that it contained eight building remains, three pedestrian facilities, four drainage facilities, two walls, three embankments, and an estimated pagoda remain. Even though this investigation was restricted to some sections of the site, it confirmed remains of architectural significance and thus attracted the attention of concerned researchers. This study thus set out to make an architectural survey of the site based on the excavation results and examine the characteristics and nature of remains of Buildings No.2 and 3 at the site. The planar analysis results show that Building No.2 (Remains 2-2) at the site of Beopsusa Temple was a gable-roofed building with a single story including 6 kan(間) in the front and 4 kan(間) in the flank and that Building No.3 (Remains 3-3) was a single-story building with a hipped-and-gable roof including 5 kan(間) in the front and 3 kan(間) in the flank. The most noteworthy remain of this excavation was the north-south square platform discovered at the Building No.2 at the site. It is estimated as a high chair platform used for Buddhist sermons. It was confirmed only at the lecture hall remains of Hwangnyongsa Temple and Anyangsa Temple in the nation and had never been found at remains related to Chinese and Japanese Buddhist Temples, being regarded as a very important and unique artifact. Since it was found at the remains of Building No.2, they was estimated as the lecture hall remain at the site. Found at the remains of Building No.3 at the site, the oblong altar remains were also very unique and rare and never found at other Buddhist temple sites. The inside of oblong altar was evenly covered with roof tiles instead of rubble, and there were small crushed stones for internal division, which is an altar construction method distinctly different from its counterparts at other Buddhist temple sites. Those findings raise the possibility high that a wooden facility was put up at the top of oblong remains.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.2
• /
• pp.110-133
• /
• 2009

This study is on the types and characteristics of foundation and basestone which can be seen in remains of Baekje and Silla in beginning study of them in ancient Korean architecture. This is a close investigation that division of the shape of the basestone and the type of Jeoksim(積心, the supporting part under the basestone) and foundation under the ground. Also it can be seen that the difference of construction technique and the relation with each part. The research objects are the remains of temples which had been excavated or are been excavating now in Baekje area and in Silla from 6th to 8th century. Results of research published in north Korea are quoted for the remains in Goguryeo being unable to be seen as they are in north Korea. If it had been possible to visit the sites, the materials would have been collected from the direct investigation. Otherwise they are collected from the excavaion results published. After that the basestone and the foundation could be divided according to several types. Also each types can be compared and studied according to times and building use. The results are follows. There are some different characteristics between Baekje and Silla in the technique of foundation, jeoksim, and basestone. Through them it is possible that the arhitectural technique of Baekje had been introduced to not only wooden pagoda in the erection of hwangryongsa temple. These results are considered limited in a few remains grasped the characteristics so it should be complemented continuously as the outcome of excavation of architectural remains will be accumulated to.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.246-263
• /
• 2019

The stone Buddha statue of Sangunsa Temple at Bukhansan in Goyang, Gyeonggi Province, is an excellent example of stone Buddha statues created in the late 15th century. On the base of the figure, there is an inscription, which informs that it was produced in 1497. In recognition of this significance, it was recently designated as a tangible cultural asset in Gyeonggi-do. Thus, this paper tried to evaluate the value of the statue by analyzing iconography and style. The characteristics of a typical 15th-century style that the Buddha statue of Sangunsa Temple shows are the form of ushnisha, the way clothes are worn, the form of a w-shaped chest muscle, and the simple lotus pedestal. On the other hand, the elongation of the waist and the disappearance of the waistband on undergarments are new forms of Buddha statues in the 16th century. Besides, parting the hair in the middle of the head and leaf-shaped short ribbon draped on undergarments are unique features that only appear on the statue of Sangunsa Temple. Sangunsa has been known to be built in the early 18th century based on Bukanji compiled by Seongneung in 1745, and Bongeunbonmalsaji composed in 1943. However, the statue was created in the late 15th century, before the establishment of the temple in the early 18th century. Therefore, this paper briefly reviewed the history of Sangunsa Temple, focusing on the initial period, referring to the historical sites and the relics that were passed on to the temple, as well as the literature records. The data newly referred to in the study are as follows: Sangunsa Stone Pagoda, presumed to be from the Goryeo Dynasty; the Stone Buddha Statue of Sangunsa; Wooden Amita Triad Buddha Statue of Sangunsa. According to the data and contrary to previously-held beliefs, Sangunsa Temple is believed to have been operating since the Goryeo Dynasty. It can be inferred through analysis of the stone Buddha statue of Sangunsa Temple that the size of the Temple before the 18th century was not very large.