• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10b
• /
• pp.906-911
• /
• 1998

This study is about an application of permanent form to the field. The present problem of this country's building market in the face of 3D, in addition to construction cost increase, materials lack problems and opening a building market to foreign countries, is trying to find out the efficient ways of overcoming these problems. So the efficacy of form work to technical improvement will contribute a practical permanent form in field through scientific test of the design and construction of permanent form. According to the result of these experiments, they seemed to be a permissible error range of Permanent form ± 5mm and steel reinforcing of Permanent form seemed to be ±5mm. a modification of Permanent form is superior to any wooden form.

• Journal of Korea Multimedia Society
• /
• v.19 no.8
• /
• pp.1275-1280
• /
• 2016

This research is for the visualization of wooden cracking phenomena in the virtual world. Timber supplies has been traditionally used for buildings in the all over the world. Wood has a characteristic that is more prone to be influenced and distorted under the external environments compared with other materials like as stone and concrete. Many related researches say that moisture content change is a largest impact factor for the distortion and crack of timber supplies. This is the reason why we focus on the relationship between the moisture variations and the wood distortion, especially crack. In this research, it is mathematically explained that the diminutions of tensile strength caused by repeated contraction and expansion according to the moisture variations under the changes of weather. Finally, we suggest a way to visualize it for pine timbers.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.8
• /
• pp.129-136
• /
• 2018

Termites are important sub-baits of natural ecosystems and are beneficial insects that are natural decomposer. However, the building materials used by human beings can not coexist with each other on timber which is a termite food. As of 2017, due to fertile forests, warming, and the spread of boilers, termite damage to timber construction is increasingly occurring day by day. Currently, Korea utilizes fumigation, Beit system, preserved wood, etc. of chemical products as termite control measures. But in the case of control measures, timber that has already been eaten by termites can not serve as a structural material and must be repaired. On the other hand, in the case of overseas, Scale of damage to termites the influence on the construction is also large, and a lot of research has been carried out on the prevention methods. In this thesis, investigate such foreign control measures, Would like to suggest a suitable method for Korea.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.5 s.133
• /
• pp.21-28
• /
• 2005

For the proper conservation of wooden cultural properties, non-destructive evaluation (NDE) method, which can be used to quantitatively evaluate the internal state of wood members, are needed. In this study, an ultrasonic CT system composed of portable devices was attempted, and the capacity of this system was verified by reconstructing the CT images for two phantoms and two artificially defected specimens. Results from this study showed that the sizes of detected defects were enlarged and the shapes were distorted on the CT images. Also, the positions were shifted somewhat toward the surface of specimen, which is regarded due to the anisotropic property of wood. Compared to the filtered back-projection method, SIRT (simultaneous iterative reconstruction technique) method was determined to be more efficient as the algorithm of image reconstruction for wood. A new ultrasonic CT system is thought to be used as a NDE method for wood. However wood characteristics and wave diffraction within wood made it difficult to accurately evaluate the size, shape and position of defects. To improve the quality of CT image of wood, more research including the relationship between wood and ultrasound is needed, and wood properties should be taken into consideration on the image reconstruction algorithm.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.44 no.1
• /
• pp.18-24
• /
• 2018

Objectives: Foreign bodies (FBs) account for 3.8% of all pathologies of the head and neck region, and approximately one third of them are missed on initial examination. Thus, FBs represent diagnostic challenges to maxillofacial surgeons, rendering it necessary to employ an appropriate imaging modality in suspected cases. Materials and Methods: In this cross-sectional study, five different materials, including wood, metal, glass, tooth and stone, were prepared in three sizes (0.5, 1, and 2 mm) and placed in three locations (soft tissue, air-filled space and bone surface) within a sheep's head (one day after death) and scanned by panoramic radiography, cone-beam computed tomography (CBCT), and ultrasonography (US) devices. The images were reviewed, and accuracy of the detection modalities was recorded. The data were analyzed statistically using the Kruskal-Wallis, Mann-Whitney U-test, Friedman, Wilcoxon signed-rank and kappa tests (P<0.05). Results: CBCT was more accurate in detection of FBs than panoramic radiography and US (P<0.001). Metal was the most visible FB in all of modalities. US was the most accurate technique for detecting wooden materials, and CBCT was the best modality for detecting all other materials, regardless of size or location (P<0.05). The detection accuracy of US was greater in soft tissue, while both CBCT and panoramic radiography had minimal accuracy in detection of FBs in soft tissue. Conclusion: CBCT was the most accurate detection modality for all the sizes, locations and compositions of FBs, except for the wooden materials. Therefore, we recommend CBCT as the gold standard of imaging for detecting FBs in the maxillofacial region.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.315-325
• /
• 2020

The Daetongsa temple is the earliest temple to be constructed during the era of the Three Kingdoms in ancient Korea. The main architect, purpose, and name of the temple have been confirmed through ancient literature and archeological materials carved in the Chinese letter, Daetong, excavated around Gongju. However, the location and range of the temple have remained elusive and were discussed in various studies. In this study, we examine the roof tiles obtained from the presumed site of the Daetongsa temple. The tiles were found to contain traces of red paint (red pigments) on their surface and analyzed using nondestructive techniques. The results imply that roof tiles were made using clay tablets and wooden cylinders, with latticed cloth in between. Additionally, some wooden cylinders appeared to comprise numerous wooden plates tied together by strings. The clay tablets used to make the roof tiles were produced from the source clay via the sorting process. The traces of red paint on the surface of the roof tiles were verified to be traditional pigments used for painting wooden buildings. These pigments were extracted from red ocher or red clay (Seokganju), mainly consisting of iron oxide. In the literature, the location of provenance sites for Seokganju is estimated to be far from Gongju. However, the materials for extracting the red pigments were relatively easy to source because most rocks comprised iron oxides. Therefore, it is necessary to discuss the provenance of the red pigments around the presumed site of Daetongsa.

• Korean Journal of Poultry Science
• /
• v.45 no.3
• /
• pp.147-154
• /
• 2018

A total of 90 one-day-old male broilers (Ross 308) were randomly assigned to one of the three dietary treatments, each consisting of six replicates (5 broilers/cage). The dietary treatments were 1) control (CON: fresh clean water with no supplement); 2) low dose [LD: CON + 1.56% extractions from the wooden chips (EWC)] and 3) high dose (HD: CON + 12.5% EWC). Drinking water supplemented with EWC was provided using specifically designed individual nipple drinker units. Average daily water intake (ADWI), average daily gain (ADG), average daily feed intake (ADFI), and feed conversion ratio (FCR) were measured weekly for 21 days. One broiler from each cage was euthanized for measuring the visceral organ weights and collecting ileal tissue samples for ileal architecture analysis on day 21. Broilers assigned to the LD and HD watery groups showed higher ADWI than that in broilers consumed CON on day 7 (P<0.05). The broilers subjected to HD treatment showed a deeper crypt depth (P<0.05) than that in broilers subjected to LD and CON on day 21. Therefore, broilers consumed HD showed a lower (P<0.05) villus height:crypt depth ratio than that broilers consumed CON on day 21. Broilers provided drinking water containing any of the tested concentrations of EWC showed no effect (P > 0.05) on growth performance, ileal villus height, and visceral organ weights as compared with those in the CON from hatch to 21 days. In conclusion, broilers fed HD showed reduction in villus height:crypt depth ratio without impairing growth performance and visceral organ weights for the experimental period.

• Journal of the Korea Furniture Society
• /
• v.17 no.1
• /
• pp.11-22
• /
• 2006

This study attempted to visually inspect eight hundred wood crafts collected from various countries. These include sculputures, toys, jewl cases, kitchen wares, candle holder and wooden vases, stationery, sport outfits and etc. The most impressive wood is Myrtlewood, a broadleaf evergreen which grows along the coastline of southern Oregon and northern Califonia. Myrtlewood possesses a wide variety of grove patterns. This unique wood varies in color from a deep, rich brown to silver grey, red and every yellow. Myrtlewood is being recognized as being one of the most beautiful hardwoods in the world.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.3
• /
• pp.60-85
• /
• 2014

The study is for tracing the mutational process, considering the transformational process of wooden chamber tombs in Gyoungju region during 2~6 century. In addition, class features and the meaning of tombs were studied. First of all, the wooden chamber tombs were classified into 10 different styles(1A~IVC), based on the filling materials, the ways of structure, and the structure of burial chamber. There were only one or two tombs that belongs to the highest classes 'Ga'~'Da' in each period, which has the numeral features. Furthermore, the styles of the central wooden chamber tombs according to the period and the region have distinctive features and have changed so far. It shows that there are the rank among the tombs in the regions. In other words, regarding the ranks of the class 'Ga'~'Cha', there were strict rules and the limitations on the size of the tombs and the number and the quality of the burial relics. It means that the inner-outer size or the structure of the tombs and the number, quality of the burial goods depended on the buried person's birth or social classes, or achievements. Based on Shila social classes, the class 'Ga' tombs were for the highest classes when considered the size, burial relics, and the quality. The class 'Na' and 'Da' tombs were for the higher classes, 'Ma' for middle classes, 'Ba', 'Sa' for lower classes. In addition, 'Ah', 'Ja' tombs were for higher commoner, 'Cha' for lower commoner. Thus, class 'Ga'~'Sa' is the leading class of Shila.

• Journal of the Korean housing association
• /
• v.19 no.6
• /
• pp.157-166
• /
• 2008

Until 1960, the major housing type of rural area in Korea was traditional wooden frame building, which was made of natural materials. In the course of modernization and New Village Movement, most of traditional houses have been renovated focusing on changing roof material of rice straw into slate, keeping existing main wooden structure. And then from around 1980, by economical development the new houses have been constructed. On these three phases of traditional type, remodeling type and new construction type, the natural materials of housing facade as wood, soil, stone and plant changed into artificial materials as cement, chemical material and paint. At the same time the exterior color of housing also have been changed and varied. The purpose of this thesis is to find out the changing aspect of exterior color by comparing remodeled and new constructed housing with of traditional housing. The exterior color of one hundred and fifty seven houses were surveyed and the three color attributes of each part of facade, as roof, wall and window, were analyzed and compared. In case of traditional houses, 98.3% of color are concentrated on the warm color of Y and YR on HUE scale, and 88% of their color are low Chroma. And Value of their color has been varied and spreaded from low to high Value scale. From traditional types to remodeled and new constructed houses, the concentration ratio of warm color on Hue scale reduced from 98.3% to 68.7% and ratio of low Chroma was also changed from 88% to 73.2% and the ratio of low Value color reduced from 51.9% to 29.7%. The exterior color of houses in rural area varied on Hue, and the more saturated colors were used and they became brighter compared with color of traditional houses. It is expected that the results of this study can be used for basic data of exterior color planning and improvement into harmonized color with natural environment.