• Journal of the Korean Wood Science and Technology
• /
• 제34권3호
• /
• pp.30-37
• /
• 2006

본 연구는 각종 실내디자인에 이용되는 목질보드의 포름알데히드(HCOH) 방산 특성과 몇 가지 VOC 저감 방법에 대한 포름알데히드의 방산량 변화를 측정하였다. 포름알데히드 방산량은 온도가 증가함에 따라 뚜렷이 증가하는 경향을 보였고, 측정 전 처리조건에 따라 포름알데히드 방산량의 현저한 변화가 나타났다. bake-out 처리후의 목질보드의 포름알데히드 방산량은 대조구와 비교하여 감소함을 나타냈다. 시편에 urethane, cashew, water stain, oil stain coating을 했을 때 각 마감재료에 따라 포름알데히드 방산량의 차이가 확인되었으며, edge sealing 처리 후 두드러진 감소경향이 나타났다. $TiO_2$ coating은 일반광보다는 자외선 램프의 포름알데히드 저감효율이 좋았고, 자외선 램프의 조사시간이 길어지면 포름알데히드의 감소량도 증가하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제33권5호통권133호
• /
• pp.66-75
• /
• 2005

Soybean-based adhesives have recently been reconsidered as alternatives to petroleum-based adhesives due to the uncertainty of availability of petrochemical products and the increased demand for wood adhesives. This study was conducted to investigate the adhesive properties of alkaline phenolic soy (APS) resin for hybrid poplar flakeboard. The APS resin was formulated by crosslinking an alkaline soy flour hydrolyzate with lab-prepared PF resin in the soy hydrolyzate to PF resin weight ratios of 70/30, 60/40, and 50/50. The APS resins were used to fabricate homogeneous hybrid poplar flakeboards with different resin solid levels (5%, 7%, and 9%), press temperatures (175 and $200^{\circ}C$), and press times of 8 and 10 minutes. The IB, wet MOR, and dimensional stability properties of board improved with increasing press time, press temperature, and PF level in APS resins. Increasing press time can be used to offset poor IB strength associated with a 9% resin solid level and the excessive moisture content in the mat. The following conditions were concluded to meet the requirements of the CSA standard for exterior-grade flakeboard: a 50% PF level, a 5% resin content, a $200^{\circ}C$ press temperature, and an 8 minute press time.

• Journal of the Korean Wood Science and Technology
• /
• 제45권4호
• /
• pp.432-443
• /
• 2017

Maltodextrin and citric acid are two types of natural materials with the potential as an eco-friendly binder. Maltodextrin is a natural substance rich in hydroxyl groups and can form hydrogen bonds with lignoselulosic material, while citric acid is a polycarboxylic acid which can form an ester bond with a hydroxyl group at lignoselulosic material. The combination of maltodextrin and citric acid as a natural binder materials supposed to be increase the ester bonds formed within the particleboard. This research determined to investigate the bonding properties of a new adhesive composed of maltodextrin/citric acid for nipa frond particleboard. Maltodextrin and citric acid were dissolved in distillated water at the ratios of 100/0, 87.5/12.5, 75/25 and 0/100, and the concentration of the solution was adjusted to 50% for maltodextrin and 60% citric acid (wt%). This adhesive solution was sprayed onto the particles at 20% resin content based on the weight of oven dried particles. Particleboards with a size of $25{\times}25{\times}1cm$, a target density $800kg/m^3$ were prepared by hot-pressing at press temperatures of $180^{\circ}C$ or $200^{\circ}C$, a press time of 10 minute and board pressure 3.6 MPa. Physical and mechanical properties of particleboard were tested by a standard method (JIS A 5908). The results showed that added citric acid level in maltodextrin/citric acid composition and hot-pressing temperature had affected to the properties of particleboard. The optimum properties of the board were achieved at a pressing temperature of $180^{\circ}C$ and the addition of only 20% citric acid. The results also indicated that the peak intensity of C=O group increased and OH group decreased with the addition of citric acid and an increase in the pressing temperature, suggesting an interreaction between the hydroxyl groups from the lignocellulosic materials and carboxyl groups from citric acid to form the ester groups.

• Journal of the Korean Wood Science and Technology
• /
• 제43권4호
• /
• pp.511-517
• /
• 2015

방염처리에 의한 톱밥-귤박 혼합파티클보드의 방염성능과 흡음성능의 변화를 관찰하고자 톱밥과 귤박을 혼합하여 파티클보드를 제작하였다. 보드로부터 원반형 시험편을 제작하여 무처리 보드에 2마이크로폰 전달함수법으로 보드의 흡음률을 측정하고 동일한 시험편에 방염수지를 도포한 후 동일한 방법으로 흡음률을 측정하였다. 방염성능 시험은 무처리와 방염처리 톱밥-귤박 혼합파티클보드를 45도 연소챔버에서 연소하여 탄화면적을 비교하였다. 방염처리에 의해시험편의 중량은 6.3% 정도 증가하였으며 탄화면적은 46.7% 정도 감소하였다. 흡음률은 측정주파수범위(500-6,400 Hz) 에서 방염처리 시험편이 무처리 시험편보다 약간 낮게 나타났다. 무처리와 방염처리 톱밥-귤박 혼합파티클보드의 흡음성능은 측정주파수 영역에서 상용 석고보드(두께 11 mm)보다 우수한 흡음성능을 나타내어 비내력벽 등의 흡음판으로의 이용이 기대된다.

• 한국가구학회지
• /
• 제19권2호
• /
• pp.116-123
• /
• 2008

Kiln schedule development was based on two schedule phases, the first being to determine the maximum safe kiln temperature during the check prone initial stage of drying, with the second stage determining how to accelerate drying once the danger of checking had passed. This was achieved by using 38 mm thick boards which were pre-screened for susceptibility to internal checking, and then drying matched sample boards over a range of kiln temperatures. Research has shown that below 50% MC there is no further risk of internal checking. However, difference in drying rate due to board width and the increased occurrence of wet patches in wide boards means that it is essential to modify the basic schedule according to the maximum board width. A condition of 52/40 $^{\circ}C$ was selected for the checking-free initial kiln drying step and a 5-step kiln-schedule dried the boards from 109% to 8% MC for 72.5 hours without internal checking.

• 한국가구학회지
• /
• 제26권2호
• /
• pp.122-129
• /
• 2015

In previous study, VOC emission characteristics of coating materials for wood finishing were conducted and results showed that eco-friendly products has about 15~46% lower TVOC emission than typical products. In this study, lower TVOC emitted coating materials were applied on pine and then changes of VOC emission characteristics from pine with treatments were determined. Non-treated pine emitted $604.7{\mu}g/m^2h$ of TVOC that contained 66% of NVOC ($399.7{\mu}g/m^2h$). However, $V_2$ finished pine showed no NVOC emission rather than AVOC emission that consisted of Toluene, Ethylbenzene, m,p-Xylene, o-Xylene, 1,2,4- Trimethylbenzene. All coating materials inhibited ${\alpha}$-Pinene emission which originally from pine, but waterborne stain ($W_1$ and $W_3$) showed lower disruption of that emission. Moreover, $W_3$/wood showed higher NVOC emission such as ${\alpha}$-Terpinol, Terpinen-4-ol which are known as antioxidant substrates. Based on results, VOC emission characteristic of pine was significantly affected by coating materials with negatively in terms of ${\alpha}$-Pinene emission or positively in terms of NVOC emission. Therefore, coating material is important factor for indoor air quality when it would apply on wood products. For the future study, VOC emission characteristic of coated wood will be conducted continuously.

• Journal of the Korean Wood Science and Technology
• /
• 제34권4호
• /
• pp.22-30
• /
• 2006

VOC Analyzer는 톨루엔, 에틸벤젠, 자일렌, 스틸렌 등 4가지 방향족 탄화수소 가스를 측정하기 위한 휴대용 장비이다. VOC Analyzer는 반도체 가스 센서가 존재하는데 이 센서는 가스크로마토그래프에 필요했던 캐리어 가스를 필요 없게 하였다. 게다가 반도체 가스 센서는 가스 성분에 대해 초고감도이기 때문에 전형적인 가스 포집기나 복잡한 장비가 필요 없다. 다른 측정방법과 비교하면 VOC Analyzer는 실험의 반복과 결과의 도출이 용이하기 때문에 건축자재에서 톨루엔, 에틸벤젠, 자이렌, 스티렌을 측정하는데 유용하다. VOC Analyzer는 기본적 공기 중의 4가지 VOC를 측정하는 것인데, 본 연구에서 재료, 파티클보드에서 방산되는 VOC를 분석하는 방법을 고안하였다. 시편을 밀봉하여 96시간 후에 측정할 때 최대 VOC 값, 즉 안정화 된 VOC 방산량을 측정할 수 있다. 건축자재의 TVOC 방산을 측정 시 다른 방법에 비해 쉽고, 빠르며 경제적인 시험 방법이라 VOC Analyzer를 이용한 시험 방법을 개발하였다. VOC Analyzer는 건축 자재로부터 방산되는 VOC에 대해 빠른 측정과 쉬운 시험방법이 요구되는 곳에 널이 사용 될 것이라 기대한다. 더욱이 VOC Analyzer는 현재에 사용되고 있는 표준 방법 보다 더 쉽고, 빠르고, 경제적인 기술로의 적용이 가능하였다.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.98-103
• /
• 2015

The reduction of the energy consumption in papermaking process become more important issue because of the regulation of green house gas (GHG) emission. Since more than half of energy for papermaking process is consumed during drying process, the increase of the drying efficiency would be very important solution for saving energy and reduction of GHG emission. The improvement of drying efficiency could be very difficult for the liner board mill because the liner board are usually made of recycled paper, OCC (old corrugated container). The short fiber and fines originated the OCC lead to compact sheet structure and delay the water flow out during wet pressing process and drying process. The application of lignocellulose spacer could provide more loose wet sheet structure and result in the higher drainage rate and the improved drying efficiency. In this study, the effects of the application of lignocellulose spacer to the liner board mill were evaluated based on the mill trial. In order to overcome the common disadvantage of the spacer, the loss of strength properties, the spacer was pretreated with amphoteric polyelectrolyte during mill trial. The results showed the application of pretreated spacer improved the drying efficiency by reducing steam consumption. And the loss in the strength properties by the spacer could be supplemented by the pretreatment.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2008년도 제33회 펄프종이기술 국제세미나
• /
• pp.1-46
• /
• 2008

fille의 효과 및 미세섬유의 보류를 콘트롤하는 것은 새로운 지종을 개발하는데 있어서 매우 중요한 것이다. 또한 기계적 성능을 최대화 하고 최종 소비자의 가 원하는 종이의 구조를 갖도록 하는데 있어서도 매우 중요한 것이다. 특히 고속 고전단력을 갖고 있는 설비에서 fille 을 많이 사용하면서 종이 및 판지를 생산하는데 있어 원하는 보류 및 지합을 구현하는 것은 매우 어렵다. 양이온 및 음이온 마이크로 폴리머(MP)의 새로운 기술이 개발되었다. 이번에 개발된 수용성 화학 물질은 휘발성유기물질(VOC) 및 알킬페놀에독실레이트(APE)가 없다. 그러한 MP 를 선형구조의 폴리아크릴아마이드와 함께 적용하거나, 무기 마이크로파티클(벤토나이트, 실리카 혹은 유사한 광물질)과 함께 사용하면 탈수, 섬유보류 그리고 회분보류에 있어서 아주 뛰어난 효과가 나타났다. 그러한 효과는 백상지 및 SC 종이등 고충전 종이에서뿐만 아니라 회분량이 적은 신문지 생산에서도 확인되었다. 특히 미표백 포장용지 생산시 폴리아크릴아마이드와 함께 양이온성 MP를 사용하면 탈수효과가 뛰어나게 개선됨을 볼 수 있었다.

• 한국연소학회지
• /
• 제22권4호
• /
• pp.1-8
• /
• 2017

This study was conducted to evaluate the fire retardant performance of exfoliated graphite nanoplatelets (xGnP) applied for particleboard. This work measured heat release rate(HRR), total heat release(THR) and smoke production rate(SPR) of xGnP added particleboard, using cone calorimeter to assess its fire characteristics according to the KS F ISO 5660-1 standard code. Heat release rates of all specimens treated by xGnP were less than the $200kW/m^2$ for a total experiment period of five minutes. Heat release rates of the specimens coated with xGnP were lower than those of the specimens made by mixing wood particles with xGnP directly. Meanwhile, the total heat release rates of xGnP coated specimen maintained quite lower level than the uncoated so the xGnP coating were effective in improving the fire retardant performance of particleboard. However, the smoke emission peaking problem at the initial combustion period, which was caused by adding base coating materials, should be resolved for further satisfaction as a fire retardant materials.