• Journal of the Korea Furniture Society
• /
• 제19권5호
• /
• pp.365-374
• /
• 2008

Understanding of the properties of woods is important in wood utilization. Until now, traditional wooden houses(Korean-style house, Buddhist temple, royal palaces) and furniture have been made of domestic woods with the experience of a craftsman rather than the scientific knowledge on woods. Because of concrete-based houses and imported wood products and furniture, even wood craftsmen decrease in number, too. This study was carried out to collect wood samples growing in Korea and to measure wood characteristics. Anatomical, physical and mechanical properties of 37 wood species were investigated.

• Journal of the Korean Wood Science and Technology
• /
• 제44권4호
• /
• pp.600-606
• /
• 2016

Wood-based composite panels such as plywood, particleboard (PB), or medium density fiberboard (MDF) are mostly used in the lamination on their surface for the manufacturing of furniture, or interior building products, the concern on the formaldehyde emission (FE) from the surface laminated wood panels is increasingly attracting attentions from the public. Thus, this study was conducted to understand influence of surface laminating materials to the FE from PB and MDF with or without edge sealing, using 24-hour desiccator method. Both PB samples that had been laminated on their surface with low-pressure laminate (LPL) or polypropylene (PP) film and MDF that had been treated with poly(vinyl chloride) (PVC) or coating were tested for the FE with or without edge sealing. As expected, the FE of PB with the sealed edges decreased to 37.4% and 80.7% with the LPL and PP lamination, respectively. The surface laminated MDF with the sealed edges also showed a decrease in the emission up to 57.8% and 54.3%, with the PVC lamination and coating, respectively. However, the coated MDF samples showed 5.3% increase in the emission when their edges were not sealed, indicating a FE form the solvent used for coating. These results showed that the type of surface lamination materials on wood-based composite panels has a great impact on their resultant FE, indicating that the influence of surface laminating materials should be taken into consideration for the formaldehyde mission measurement.

• Journal of the Korean Wood Science and Technology
• /
• 제42권3호
• /
• pp.339-345
• /
• 2014

For enhancing productivity of glulam, high frequency (HF) curing technique was researched in this study. Heat energy is generated by electromagnetic energy dissipation when HF wave is applied to a dielectric material. Because both lamina and adhesives have dielectric property, internal heat generation would be occurred when HF wave is applied to glulam. Most room temperature setting adhesives such as phenol-resorcinol-formaldehyde (PRF) resin, which is popularly used for manufacturing glulam, can be cured more quickly as temperature of adhesives increases. In this study, dielectric properties of larch wood and PRF adhesives were experimentally evaluated, and the mechanism of HF heating, which induced the fast curing of glue layer in glulam, was theoretically analyzed. Result of our experiments showed relative loss factor of PRF resin, which leads temperature increase, was higher than that of larch wood. Also, it showed density and specific heat of PRF, which are resistance factors of temperature increase, were higher than those of wood. It was expected that the heat generation in PRF resin by HF heating would occur greater than in larch wood, because the ratio of relative loss factor to density and specific heat of PRF resin was greater than that of larch wood. Through theoretical approach with the experimental results, the relative strengths of ISM band HF electric fields to achieve a target heating rate were estimated.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제38권4호
• /
• pp.68-75
• /
• 2006

Electromagnetic shielding sheet using the carbon and wood fiber mixture was manufactured in an effort to develop an electromagnetic shielding packaging material. Carbon fibers were cut into 5, 10, and 15 mm using the automatic cutting device and blown and dispersed using compression air passed through the fine nozzle. Then carbon fibers were slurried with water (0.1% consistency), and softwood kraft pulp along with cone starch were added. The wet mats were manufactured by dewatering in modified hand-sheet machine. The wet mats were pressed upto $4kgf/cm^2$ in the carbon and wood fiber mixture mat press. The wet mats were dried in the automatic controlled plate dryer. Investigation on the formation and surface structure of the newly developed carbon and wood fiber mixture electromagnetic shielding sheet were carried out using the scanning electron microscopy and the image analyzer. Finally electromagnetic shielding characteristics of the newly developed carbon and wood mixture sheet were measured using net-work analyser. The result was promising in the light of the fact that this method could open a new way to substitute the expensive imported electromagnetic shielding sheet.

• Journal of the Korean Wood Science and Technology
• /
• 제39권2호
• /
• pp.163-171
• /
• 2011

Because Japanese cedar shows lower mechanical performance, glued-laminated timber (glulam) can be a better way to utilize Japanese cedar for structural purpose. However, low yield of higher grade lamination from log makes it difficult to design structural glulam. This study was aimed to increase the yield of higher grade lamination and provide higher efficiency of manufacturing structural lamination by ultrasonic log sorting technology. Logs were sorted by an existing log grading rule regulated by Korea Forest Research Institute (KFRI). It was found that the KFRI log grading rule contributed to finding better logs in viewpoint of the volumetric yield and it can reduce the number of rejected lumber by visual grading. However, it could not identify better logs to produce higher-grade products. To find an appropriate log-sorting-method for structural products, log diameter and ultrasonic time of flight (TOF) for the log were considered as factors to affect mechanical performance of resulting products. However, it was found that influence of log diameter on mechanical performance of resulting products was very small. The TOF showed a possibility to sort logs by mechanical performance of resulting products even though a coefficient of correlation was not strong (R = 0.6). In a case study, the log selection based on the ultrasonic TOF of the log increased the yield of the outermost tension lamination (E8 or better grade, KS F 3021) from 2.6% to 12.5% and reduced LTE5 (lower than E5 grade) lamination from 43.6% to 10.3%, compared with the existing KFRI log grading rule.

• Journal of the Korean Institute of Gas
• /
• 제16권6호
• /
• pp.80-86
• /
• 2012

From 1982, the Korean Ministry of Employment and Labor has executed the risk assessment regulation for manufacturing industries. When a manufacturing company install, transfer, or modify the major facilities, the program inspects and verifies safety of the working place to ensure safety against risks. This study performed cost-benefit analysis of the program for the eight industrial categories that were free from the program. The cost-benefit analysis is the basic method to estimate the effect of the policy execution, and used to justify the policy effectiveness. As a result, there is the biggest benefit in the manufacture of basic metal products and then motor vehicles, trailers and semitrailers, other manufacturing, other machinery and equipment, wood products of wood and cork, rubber and plastic products, food products, furniture in order. Thus the hazard prevention program should be applied into the 8 industrial categories in order to strengthen national competitiveness, protect labors's safety, reduce the social cost and improve the welfare.

• Journal of the Korean Wood Science and Technology
• /
• 제44권5호
• /
• pp.617-621
• /
• 2016

On-site survey on glue-laminated board (GLB) manufacturers of Malaysia, Indonesia, and China was conducted to identify the cause of interception of regulated pest from imported GLBs from those countries, and to suggest optimal manufacturing processes of GLB for preventing quarantine risk associated with imported GLBs. The cause of pest interception was improper manufacturing processes, such as air drying or inadequate kiln drying of green laminae, improper storage of dried laminae before finger jointing and edge gluing, and/or incomplete packing of GLBs. In particular, Paulownia GLB manufacturing processes used in China, including air drying of laminae, were mostly poor in terms of preventing quarantine risk associated with imported GLBs. From now on, for preventing quarantine risk associated with imported GLBs, importers have to ask foreign manufacturers spontaneously to use proper manufacturing processes (adequate kiln drying of green laminae, proper storage of dried laminae, and complete packaging of final GLBs).

• Journal of Distribution Science
• /
• 제20권2호
• /
• pp.31-41
• /
• 2022

Purpose: Developing and nurturing supply chain dynamic capability is one of the leading solutions to create competitive advantages, maintain growth and sustainable development for businesses. The study was conducted to experimentally confirm the impact of supply chain dynamic capability on competitiveness and business efficiency for Vietnamese wood enterprises. Research design, data and methodology: The study surveyed 236 managers of Vietnamese wood manufacturing and distribution enterprises. The authors applied the structural equation modeling (SEM) to analyze the relationship between the dynamic capability of the supply chain and the competitiveness, business efficiency of enterprises to achieve those goals. Results: The results show that businesses owning supply chain dynamic capability will have better competitiveness and business efficiency. Especially, in the context of Vietnamese wood sector, the larger the scale of business, the more profound the impact of supply chain dynamic capability on competitiveness and business efficiency. Conclusions: Focusing on developing supply chain dynamics would be a promising solution to improve the competitiveness of Vietnam's wood enterprises in the global market.

• Journal of the Korean Wood Science and Technology
• /
• 제46권6호
• /
• pp.703-712
• /
• 2018

The sound absorption property, hand feel, air permeability and pore size of 25 kinds of traditional Korean natural wallpapers (Hanji) were measured and analyzed in this study. The sound absorption rate of Hanji became larger with increasing of frequency beginning from 3.2 kHz, reached 2 times in frequency range of nearby 4 kHz. The sound absorption rate of Hanji was increased as the permeability was lowered and the pore size was decreased. The sound absorption property of Hanji wallpaper could be improved by manufacturing process such as super calendering process.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제47권6호
• /
• pp.154-163
• /
• 2015

Because of acute or chronic intoxication by carbon disulfide, viscose rayon industry is strictly subjected to environment regulatory approval. Recently, non-wood fibers are frequently considered as a raw materials for the manufacture of specialty paper for the higher physical strength and functionality. Among the non-wood fibers, hemp bast fiber is one of the most widely used materials in viscose rayon yarn industries. In this study, the handsheet for manufacturing the viscose rayon yarn was prepared with wood pulp fibers and hemp bast fibers. The proper mixing ratio of wood fibers and hemp bast fibers with dry-strength agent and nano-celluloses was analysed in terms of physical and mechanical strength of sheet for viscose rayon yarn. The papermaking conditions for high mechanical strength of sheet were obtained by mixing the SwBKP and HwBKP fibers with freeness level of 200 mL CSF. The dual polymer system by controlling the addition ratio of PVAm and anionic PAM was also important. The addition of nano-cellulose into wet-end furnishes increased the physical strength of sheet, and improved the paper structure for the production of viscose rayon yarn.