• 한국건설순환자원학회논문집
• /
• 제3권1호
• /
• pp.80-86
• /
• 2007

In this study we experimented setting time and basic properties as waste wood fiber and sodium silicate substitution rate to reuse waste wood fiber produced in construction field to wood chip board. To do this construction waste woods were crushed with the size less than 10mm, mixed with the rate of 1:2, 2.5, 3, and added sodium silicate with the rate of 0, 5% of cement content. The results are as follows. As the substitution rate of construction waste wood was increased delay of setting time was also increased, and the batch of adding 5% accelerator had a 13~17 hours faster setting time than non accelerator batch. The compressive strength was lower as wood substitution rate was higher, and as the specific gravity was higher, the strength was also higher. As wood substitution rate was higher, heat conductivity was lower, and as specific gravity was higher, heat conductivity also was higher.

• Journal of the Korean Wood Science and Technology
• /
• 제22권3호
• /
• pp.51-58
• /
• 1994

Environmental conservation has become one of the greatest concerns of all the people in the world. This issue is related to wood utilization in two major view points such as carbon dioxide emitted by the use of manufacturing energy and absorbed during the growth of trees. Wood construction materials require less manufacturing energy, which, in turn, means less carbon dioxide emission. In addition, wood keeps absorbed carbon in itself as far as it is not burnt. Therefore, wood is environmentally superior to other materials in terms of potential effects on atmospheric carbon dioxide. As examples of the environmental effect of wood utilization, the following two results were obtained: 1) If wood construction becomes popular in Korea as in Japan, more than 24% of carbon dioxide emission during construction of residential housings can be reduced: and 2) If aluminum windows are substituted by wood windows, more than 19% of carbon dioxide emission can be reduced. If the principle of "cut and plant" is kept well, wood is the best construction material for environmental protection as well as human residence.

• Journal of the Korean Wood Science and Technology
• /
• 제19권3호
• /
• pp.45-52
• /
• 1991

To investigate opportunities for wood frame housing and to activate wood frame house construction, trends of construction activities. preference about housing, and building codes related to wood frame housing were discussed. And two models of wood frame house were developed and construction cost was analyzed to compare with comparative masonry houses. The results obtained were as follows: 1. While 77.8% of people prefer single-family houses, majority of people(74.9%), ironically, possess multi-family houses such as apartments Wood work cost was ratio of 4% of total building cost. while wood material cost accounted merely for 11 % out of total building material cost. 2. Building code was not major barrier to residential house at height under 13m. The building code regulated major structural member and family boder wall of multi-family house to be built with fire retardant material. 3. The proper wood frame house was analyzed of town house or villa type locating in suburban of big city with hot ondol system for the upper middle class. 4 There was no difference in construction cost between western style wood frame house and comparable masonry house, but construction cost for Korean style wood frame house is 27% higher than that of comparable masonry house. It was necessary to reduce materials and cost down by prefabrication technique for both style of wood frame house.

• Journal of Forest and Environmental Science
• /
• 제22권1호
• /
• pp.50-57
• /
• 2006

일본에서 2004년도에 발행된 산림토목 목제구조물 시공 매뉴얼에 실려 있는 산림토목 목제구조물 설계지침은 총설, 목재의 이용과 특성, 조사, 계획 및 설계 등으로 구성되어 있으며, 이 논문에서는 설계 및 시공에 대하여 분석하였다. 분석 결과, 설계편에는 목재의 사용 환경과 열화, 구조, 수종의 선정, 치수 표시 등의 통일, 안정성과 강도의 검토, 목재의 강도, 목재의 치수의 허용 폭 등에 대하여 제시되어 있다. 또한 시공편에는 목재의 품질 확보, 방부처리 등의 품질 확인, 목제구조물의 기능 확보 방법, 목재열화의 정기적인 조사방법과 정성적인 판정기준 및 정량적인 조사방법 등에 대하여 설명되어 있다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2005년도 추계학술대회 논문집
• /
• pp.323-326
• /
• 2005

This study aims to show the growing popularity in the use of wood in new residential construction and improvements to existing housing throughout Asia. Residents want wood in their house and we also have the problem to reduce carbon dioxide which we can solve by using wood. If well implemented in construction, we can expect Kyoto protocol reduce the average global temperature by 0.02$^{\circ}$C or even up to 0.28$^{\circ}$C by the year 2050. A survey of Korean and Japanese people was conducted targeting unique preferences that may exist between these two Nations. Initial findings showed that residents preferred wood in their homes and reductions in carbon dioxide was also a factor. It is important for architects and those interested in using wood to understand that there are many advantages to using wood materials for construction. From this point of view using wood to can produce appreciable effects such as cutting house maintenance costs, creating a natural home design, and building in a manner that is friendlier on the environment.

• 한국농촌건축학회논문집
• /
• 제4권3호
• /
• pp.53-62
• /
• 2002

This study aims at the development on the wood-frame house construction method in hilly areas. To obey the trend of public opinion to prohibit the troublesome development on a large scale in preparing housing sites, the small housing site development in hilly areas is on the rise and consequently wood-frame house which harmonized natural topography, geographical feature and environment in hilly areas is needed. The main contents are how to make housing sites, how to make roads, how to make pedestrian ways and surroundings of water to run downhill, how to locate house, how to make between road and house, how to view inner and outer and how to make retaining wall on the wood-frame house construction method in hilly areas.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.236-237
• /
• 2014

Recently, it changes to the frame construction in the wall type structure for the life span improvement of the apartment house of our country. The execution of the light panel increased while the execution of the frame construction increased. Therefore, the density and absorption ratio of the magnesium oxide matrix according to the wood flour amount of addition ratio property try to be analyze for the lightweight of the surface material of the light panel. The test result, the density has been declined as the addition ratio increase of the wood flour. In the case of the water absorption ratio, water absorption ratio has been increased as addition ratio increase of wood flour. However, wood flour addition ratio 15% determined the most appropriate when considering the density and water absorption ratio.

• 한국건설관리학회논문집
• /
• 제8권1호
• /
• pp.107-115
• /
• 2007

본 연구에서는 건설폐목재의 발생현황 및 원인을 조사 분석하고, 국내 및 국외 폐목재의 발생, 처리, 재활용 동향을 비교, 분석하고자 한다. 오늘날 산업사회가 고도로 발달하면서 인간의 생활은 보다 편리하고 윤택해졌지만, 그 부작용으로 환경오염과 자원고갈 문제가 심각하게 대두되고 있다. 최근 건설 산업에서 환경보호와 자원의 절약 등이 중요한 이슈로 부각되고 있으며, 필연적으로 발생되는 건설폐기물의 관리와 재활용에 대한 관심도 증가되고 있다. 발생되는 폐기물은 양적으로도 증가했을 뿐만 아니라 질적으로도 매우 복잡 다양하여 이들의 원천적 감량과 재자원화 촉진 등 자원 순환형 처리방식의 절감방안이 모색되어야 한다. 그 중 폐목재는 건설현장에서 발생되는 여러 종류의 자원 중에서 약33%정도만 재활용하고 나머지는 소각하거나 비정상적인 유통과정을 거쳐 처리되어 지고 있다. 따라서, 건설현장 폐목재 처리현황의 실태 및 요인분석을 통하여 폐목재의 적법한 처리 및 재활용에 불합리한 원인은 무엇이며 그에 영향을 주는 수많은 변수들을 도출하고 요인분석을 통하여 몇 가지 요인으로 묶어 단순화하는 것에 목적을 두고 있다.

• 건축역사연구
• /
• 제29권6호
• /
• pp.101-112
• /
• 2020

This study focuses on the construction of Gyeongbokgung Palace in the second year of King Gojong's reign, which has been spotlighted for political and economic history. The author analyzed the contents of wood procurement with the Yeonggeon Diary, which records each day of construction site. The results are as follows: First, the 2nd year of King Gojong's reign, Yeonggeon of Gyeongbokgung Palace, was a new building that reflected the old system and 270 years of changed environment on the existing site. Despite the poor economic conditions, it began with years of effort and voluntary volunteer work and dedication. Second, the priority of timber transport was recruiting people in the whole process and the supply and demand of transportation tools. Carrying lumber from the mountains to the riverside and floating it at the right time were all a matter of manpower. Soldiers and carts were used to carry timber that arrived in Hangang River to the construction site. The cart was a consumable product, so it was necessary to continuously use the wood to make cart at the site. Third, fire and flood were the biggest obstacles to the Yeonggeon schedule of Gyeongbokgung Palace. Especially the fire was fatal. It was difficult to extinguish the fire in temporary structure, where was the storage for wood to construct. These disasters greatly affected the construction cost and construction period. Wood procurements of Gyeongbokgung Palace were based on public offerings. At the same time, recycled materials from other palace wood and nearby houses, nationwide buying of private mountain wood, the logging of royal tombs and some of the buildings of Gyeonghui Palace and Changgyeong Palace were relocated.

• Wind and Structures
• /
• 제13권3호
• /
• pp.221-234
• /
• 2010

In light-frame wood construction, missing roof-sheathing fasteners can be a relatively common occurrence. This type of construction makes up the vast majority of the residential building stock in North America and thus their performance in high winds, including hurricanes, is of concern due to their sheer number. Construction quality issues are common in these types of structures primarily because the majority are conventionally constructed and unlike steel and reinforced concrete structures, inspection is minimal except in certain areas of the country. The concept of performance-based wind engineering (PBWE), a relatively new paradigm, relies on the assumption that building performance under wind loads can be accurately modeled. However, the discrepancy between what is designed (and modeled) and what is built (the as-built) may make application of PBWE to light-frame wood buildings quite difficult. It can be concluded from this study that construction quality must be controlled for realistic application of PBWE to light-frame wood buildings.