• Journal of Korea Foresty Energy
• /
• v.20 no.1
• /
• pp.28-34
• /
• 2001

To analyze chemical compositions of softwood vinegar prepared with continuous carbonized kiln, the chemical compositions were analyzed by GC-MS spectrometry. The results were summarized as follow : 1. The amounts of methylalcohol and acetic acid and of vinegar were 0.12% and 0.8% respectively, and acidity was 0.85 2. Perfume components of vinegar were frufual, 5-meayl-2-furancarboxyaldehyde, 2,3-pentanedione, 2-butanol, 2,3-dihydrofuran, 1-(2-furanyl)-etanone, benzaldehyde, 2-furan carboxyaldehyde and acetic acid. 3 Vinegar prepared from softwood, so that murk amount of guaiacyl compound and phenol derivetives are produced from lignin and extractives was analγzed. 4 The yield of 4-methyl-di-tert-butylphenol was the highest in the nutural and carbonyl and acetic acid in the acid fractions, 3-ethylpentane in the basic fraction, and guaiacol in the phenolic fraction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.1
• /
• pp.9-15
• /
• 2008

Mokumegane is one of the sophisticated metal craft techniques enabling wood grain surface effect. To embody the mokumegane, an ingot of well-bonded stacked metal plates has been required. Traditionally prepared mokumegane ingots were bonded using charcoal which enables reduction atmosphere, but sometimes end up with collapse of bonding interface due to the lack of reliable process control. We proposed a systematic vacuum direct bonding process for ingots. First, we confirmed copper//copper homogeneous plate bonding at $900^{\circ}C$ by applying uniaxial press of 2.5kg. We observed 80min required to obtain 90%-bonding ratio and the diffusion coefficient would be enhanced up to 100 times due to surface effect. Second, by considering enhanced diffusion behavior, we also obtained optimum bonding condition in copper/silver heterogeneous plates that ensures 90%-bonding ratio at $700^{\circ}C$ for 10min with apply uniaxial press. A 7-layered copper/silver ingot is prepared successfully, and eventually the prototype mokumegane cases for mobile phone were fabricated with these ingot.

• Journal of Conservation Science
• /
• v.33 no.2
• /
• pp.61-73
• /
• 2017

In order to identify the application techniques of wooden lacquerware artifacts, optical/polarized light microscopy, Fourier transform infrared (FT-IR) spectroscopy, and scanning electron microscopy (SEM) equipped with energy dispersive X-ray analysis (EDX) were conducted on the lacquer films of 61 wooden lacquerware artifacts excavated from the Imdang-dong site, Gyeongsan, Korea. Powdered soil, soot, and charcoal were used as a filler for the undercoat, and iron oxide ($Fe_2O_3$) was used as a red pigment. Five different applying techniques were identified for the undercoat according to the composition of the lacquer. Eight different application techniques were identified for the final coat (on the middle layer and surface layer). Totally seventeen application techniques were identified based on the combination methods of the undercoat and finalcoat. Consequently, the undercoating techniques of Imdang-dong lacquerwares were found to be similar to those of lacquerwares from excavated in other provinces. However, the use of iron oxide as a red pigment at Gyeongsang province is very characteristic compared with others.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.383-383
• /
• 2009

Silicon is commercially prepared by the reaction of high-purity silica with wood, charcoal, and coal, in an electric arc furnace using carbon electrodes, so called the metallurgical refining process, which produces ~98% pure Si (MG-Si). This can be further purified to solar grade silicon (SoG-Si) by various techniques. The most problematic impurity elements are B and P because of their high segregation coefficients. In this study, we explored the possibility of the using Cat-CVD for Si purification. The existing hot-wire CVD was modified to accommodate the catalyzer and the heating source. Mo boat (1.5 cm ${\times}$ 1 cm ${\times}$ 0.2 cm) was used as a heating source. Commercially available Si was purchased from Nilaco corporation (~99% pure). This powder was kept in the Mo-boat and heated to the purification temperature. In addition to the purification by cat-CVD technique, other methods such as thermal CVD, plasma enhanced CVD, vacuum annealing was also tried. It is found that the impurities are reduced to a great extent when treated with cat-CVD method.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.1
• /
• pp.12-18
• /
• 2009

This study was attempted to investigate indoor air quality of a wooden house. Emission characteristics of carbonyl compounds from indoors whose interiors were finished using ecofriendly materials were detected. From the results of the examination, the carbonyl compounds mostly consisted of formaldehyde, acetaldehyde, and hexaldehyde. Especially, formaldehyde accounted for the largest portion of the compounds at 25.6~30.5%. All the rooms except for R2-2 contained formaldehyde less than criteria of indoor air quality of newly-constructed houses. In addition, all the rooms except for room R1-3, contained acetaldehyde more than the level of $48{\mu}g/m^3$ recommended by Japan's Ministry of Health, Labour and Welfare. As a results of the different wall covering, the room R1-1 of Hwangto emitted relatively higher levels of carbonyl compounds than the room R2-1 of phytoncide. In addition, the room R2-2 of the bamboo charcoal panels emitted more carbonyl compounds than the room R1-2. The living room R1-3 of Japanese cypress (Cryptomeria Japonica) emitted lower levels of carbonyl compounds than other rooms.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.83-90
• /
• 2007

This study aimed at examining the effect of rooms decorated by eco-friendly finishing materials in a newly built wooden house on the emission of indoor air pollutions. According to the results of examination, the levels of benzene, toluene, ethyl benzene and styrene in all the rooms were below criteria of indoor air quality of newly-constructed houses. The levels of natural volatile organic compounds (NVOC), anthropogenic volatile organic compounds (AVOC) and total volatile organic compounds (TVOC) in room R1-1 which had Hwangto wall covering on it, were relatively higher than in room phytoncide wallpaper covered R2-1. The room R2-2 where bamboo charcoal panel used for wall covering showed higher level of AVOC compared to the room R1-2. Living room R1-3 was found to contain less TVOC, compared to the other four rooms. In addition, the ratio of NVOC to TVOC in the living room was higher than in the other rooms. This seemed to be attributed to Cryptomeria Japonica the living room finished material.

• Journal of Conservation Science
• /
• v.31 no.2
• /
• pp.125-130
• /
• 2015

Specific techniques and materials in conservation of traditional lacquer has not been transmitted. This study aims to compare the basic characteristics of the filler which used in the base layer of lacquer conservation. Tohoe(a mixture of lacquer and Clay) and the three kinds of additives which is mixed with Tohoe and Goksu(a mixture of lacquer, wood powder and rice starch) are estimated in drying rate, impact resistance, abrasion. Among those samples, the more amount of clay causes fast dryness speed and worse cracks on the surface. The impact resistance is weakened at high amount of clay. There is no significant differences of impact resistance between both additives that is mixed with the samples and additives. The samples that are mixed with Goksu and additives show high impact resistance. In the polishing test, the more amount of filling powders show higher grinding degree and the sample that are mixed with wood powder and charcoal show higher degree as well. The highest grinding degree is Maekchil and Goksu but the lowest one is the sample of the rooftile powder mixture.

• Analytical Science and Technology
• /
• v.28 no.6
• /
• pp.398-408
• /
• 2015

Carbon monoxide (CO) intoxication, arising from CO from an ignited charcoal briquette (ICB), is a popular means of committing suicide in Korea. Most CO intoxications are related to suicide attempts; however, the possibility of a homicide disguised as a suicide cannot be ruled out. Therefore, forensic investigation of the deceased and the crime scene is crucial to confirm that the deceased committed suicide. Detection of the components of an ICB on the objects suspected of being contacted by the deceased, such as the hands, nostrils, and doorknobs, is essential for linking the crime scene to the victim in the case of suicides by ignited ICBs. The traces from an ICB were analyzed by investigating the morphological characteristics and obtaining elemental compositions. The ICBs were completely different from blackened wood, as detected by discriminant analysis with the elements of carbon and oxygen. We analyzed one case of CO intoxication to demonstrate an excellent procedure for verifying whether a suicide occurred with an ICB. We employed SEM-EDX for the analysis of an ICB, microscope-FT/IR and pyrolysis-GC/MS for a partly burnt resin-type substance, GC/MS for diphenhydramine (a sleeping drug), and GC/TCD for the CO-Hb level. We detected traces of an ICB on the hands, nostrils, and doorknobs, which were all discriminated into an ICB group. Detection of ICB traces from the nostrils could indicate that the deceased started the fire themselves to commit suicide. The partially burnt black material was analyzed as an acrylronitrilestyrene polymer, which is normally used to make bags for carrying or wrapping and could be assumed to have been used to transport the ICB. Diphenhydramine, a sleeping drug, was detected at a level of 2.3 mg/L in the blood, which was lower than that in fatal cases (8-31 mg/L; mean 16 mg/L). A CO-Hb level of 79% was found in the blood, which means that the cause of death was CO intoxication. The steps shown here could represent an ideal method for reaching a verdict of suicide by CO intoxication produced by burning an ICB in a sealed room or a car.

• Journal of Ecology and Environment
• /
• v.43 no.2
• /
• pp.85-97
• /
• 2019

Background: Despite the increasing role of dry forests in climate change adaptation and mitigation, these versatile resources has got less attention in the national and regional planning, their potential to enhance the local and national economy has been overlooked, and their contribution to sustainable environmental management has not been recognized. Hence, the objective of this study was to assess the socioeconomic contribution of dry forests and forest products to climate change adaptation in the Liben Woreda, Southern Oromia region of Ethiopia. Methods: For this study, an integrated qualitative and quantitative approach was used. A total of 74 households from villages in the Bulbul, Boba, and Melka-Guba kebeles were randomly selected for the household survey. Results: Results showed that 75% of the respondents in the area indicated that climate change has become their major sources of vulnerability, where drought has been manifested in the form of crops failure and massive death of livestock particularly cattle species. The main income strategies of the study households include livestock, crop, forests such as gum and resins, firewood and charcoal and non-farm activities such as in the form of petty trade, wage and aid. The average total household income was ETB 11,209.7. Out of this, dry forest income constituted 15% of the total income. In addition to using dry forests as rangeland for livestock, the communities collect wood for construction, fodder, traditional medicine, and forest food both for subsistence and for sale. On the other hand, dry forest products could be considered as less vulnerable, rather resilient livelihood strategies to climate- and environment-related risks compared to livestock and crop production such as in the face of drought periods. More than 48.6% of the households argued that the income generated from dry forests increased substantially due to increment in the level of engagement of family members in forest based income activities. On the other hand, 35.8% of the households responded that livestock production, particularly camels and goats, have been making the livelihood strategies of the respondents more resilient indicating the shift made from grazers browsers to livestock. In general trends show that, the trends of livelihood dependency on dry forest were highly increasing indicating the importance of dry forest income in responsse to frequent droughts. Conclusions: Dry forest income has been becoming crucial livelihood staretgy in response to frequent droughts in the study area and hence, it is important to improve the management of dry forests for livelihood enhancement, while also securing their long-term ecological functions.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.1
• /
• pp.5-11
• /
• 2019

The main objective of this study was to analyse polycyclic aromatic hydrocarbons in surface sediments obtained from near Nakdong estuary, and to estimate ecological risks of PAHs using PAHs concentrations. The main constituents of sediments were $SiO_2$, $Al_2O_3$, CaO, $Fe_2O_3$, and ignition loss of sediments ranged from 2.97% and 8.39%. Total concentrations of PAHs ranged from $128.4ng\;g^{-1}$ and $507.4ng\;g^{-1}$, and the major PAHs were 2 ring and 4 ring aromatic hydrocarbons. Each concentrations of PAHs are all below effect range low, which indicated that each PAHs in 8 studying sites show low ecological risk. From M-ERM-Q analyses, M-ERM-Q values of 8 studying sites are below 0.1 indicating low ecological risk. From source apportionment analyses, PAHs come from grass, wood, charcoal combustion for N-1 and N-7, petroleum combustion for N-5 and N-6, petroleum pollution for N-2, N-3, N-4, N-8.