• Journal of Korean Society of Forest Science
• /
• v.94 no.6
• /
• pp.387-396
• /
• 2005

Having employed the transitional probability model based on Markov chain, the study was carried out to examine successional trends for community types in the natural deciduous forest of Mt. Jumbong. The species composition of oncoming generation in overstory was estimated from that of mid-story, and the species composition in mid-story was based upon that of understory. Successional trend for each community was predicted from the reorganized probability matrix of tree replacement by the square of climax index, which was evaluated by the factors of light absorption, reproduction, and wood quality. As the result of analysis, following table shows the oncoming generation of steady state and dominant species in overstory and mid-story by community types. Even though Acer pseudo-sieboldianum and Carpinus cordata could hardly reach the canopy layer due to the intrinsic growth form, these species were predicted to maintain high compositional ratio so as to play an important ecological role in the study forest ecosystem.

• Journal of Korean Society of Forest Science
• /
• v.98 no.1
• /
• pp.33-48
• /
• 2009

Forests store carbon dioxide ($CO_2$), one of the major factors of global warming, in vegetation and soils through photosynthesis process. In addition, woods deposit $CO_2$ for a long term until the harvested wood is decomposed or burned, and deforested areas could be expanded the carbon sinks through reforestation. Forests are a lso able to decrease temperature through transpiration and contribute to control the micro climate in global climate systems. Consequently, forests are considered as one of major sinks of greenhouse gases for mitigating global warming. It is very important to develop a Korea specific forest carbon flux model for preparing adaptation measures to climate change. In this study, we compared the climate change impact models in forests developed in foreign countries and analyzed the applicability of the models to Korean forest. Also we selected models applicable to Korean forest and suggested approaches for developing Korean specific model.

• Journal of Korean Society of Forest Science
• /
• v.110 no.3
• /
• pp.453-461
• /
• 2021

The energy use of forest biomass is crucial to deal with climate change and achieve the carbon-neutral goal. This study aims to analyze the economic feasibility of forest biomass thermal energy facilities and calculate the optimal subsidy level of heat supply to ensure continued operation of the facilities. To achieve this aim, the net present value approach (NPV) and call option price model are adopted considering wood chip price volatilities. The Forest Energy Self-Sufficient Village Project financed by Korea Forest Service is considered as the research case study. In our analysis, when 50% of the initial investment is given to the subsidies and RECs are applied to only power generation, NPV and IRR are both negative and the investment value using the real option model is also zero. We concluded that some heat subsidies should be acknowledged to keep the facilities operating. Besides, the simulation results reveal reliable economic values when the heating subsidy is priced at KRW 0.0248 per kcal.

• Journal of Korean Association for Spatial Structures
• /
• v.22 no.3
• /
• pp.25-32
• /
• 2022

In this paper, the instability of the domed spatial truss structure using wood and the characteristics of the buckling critical load were studied. Hexagonal space truss was adopted as the model to be analyzed, and two boundary conditions were considered. In the first case, the deformation of the inclined member is only considered, and in the second case, the deformation of the horizontal member is also considered. The materials of the model adopted in this paper are steel and timbers, and the considered timbers are spruce, pine, and larch. Here, the inelastic properties of the material are not considered. The instability of the target structure was observed through non-linear incremental analysis, and the buckling critical load was calculated through the singularities and eigenvalues of the tangential stiffness matrix at each incremental step. From the analysis results, in the example of the boundary condition considering only the inclined member, the critical buckling load was lower when using timber than when using steel, and the critical buckling load was determined according to the modulus of elasticity of timber. In the case of boundary conditions considering the effect of the horizontal member, using a mixture of steel and timber case had a lower buckling critical load than the steel case. But, the result showed that it was more effective in structural stability than only timber was used.

• Science of Emotion and Sensibility
• /
• v.19 no.3
• /
• pp.3-14
• /
• 2016

This study is aimed to measure the physical colorimetric property according to three conditions, natural dyestuffs (Gardenia, Sappan wood, Lac, Gardenia blue, Mugwort, and Indigo), fabric types (cotton, silk), and presence of mordant (without, with), and then to evaluate the psychological sensibility. Also, to perform analysis of variance (ANOVA) to find out the differences of physical properties according to the three natural dyeing conditions, and to analyze the relationship between physical property and psychological property by Pearson's correlation analysis and then suggest the prediction model by regression analysis using SPSS program (ver. 21.0). Finally, to propose a certain sensibility image map of naturally dyed fabrics, MDS (Multidimensional Scaling) was used, and as a result, Gardenia dyed fabrics having the color sensibilities such as 'hard' and 'heavy' were suggested to evoke masculine image, and to evoke feminine image, Sappan wood and Lac having 'bright', 'transparent', 'soft' and 'light' sensibilities were suggested. Natural image might be induced by using 'subdued' Mugwort dyed fabrics, and active image might be induced by using 'showy' Indigo dyed fabric.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.4
• /
• pp.32-44
• /
• 1987

This study was carried out to analyze and furecast the domestic demand for plywood in Korea by regression models with time-series data for 16 years(1970-85). The results obtained were summarized as follows. 1. To analyze domestic demand for plywood, GNP, PWI and CWI were used as independant variables. The domestic demand equation was computed as follows: $^{in}DDP$=0.65186+1.29412 $^{in}GNP$-0.28385 $^{in}PWI$-1.05011 $^{in}CWI$ Where DDP : Domestic demand for plywood(1000 S/F) GNP: Gross national product (Billion won) PWI : Real wholesale price index of plywood CWI: Real wholesale price index of construction materials. 2. Among independant variables reflecting on the production activity of plywood industry, GNP was the most decisive in forecasting the domestic demand for plywood. 3. The significance can be recognized highly because the decision coefficient of the forecasting model which is obtained by using time series data is 0.9. 4. According to the estimated regression coefficients for GNP, PWI and CWI, GNP shows positive relation while PWI and CWI show negative relation. 5. An annual average increase rate of demand for plywood was 9.4 percent during expect period. Therefore, it was decreased slightly than that of 10.2 percent during sample period.

• Journal of the Korean Geophysical Society
• /
• v.1 no.1
• /
• pp.59-68
• /
• 1998

Ground penetrating radar (GPR) experiments were performed in a sand tank to study the ability of detection of buried pipes and to characterize the signal of the reflection wave. The ratios of diameter of buried pipes to the depth were set 4 up to 24 % and materials were metal, synthetic resin, and wood. In case of groundwater table below buried materials, strong reflection signals were observed irrespective of diameter and depth except for wood. While it is very difficult to detect the reflection signals in case that the groundwater table is set to higher than buried materials. The reflection signals from the bottom of the sand tank, however, were clearly observed even in case of higher groundwater table. This implies that the weak reflection signals from the buried materials are not all due to the wave attenuation. The vertical reflection profiling method is recommended in case that the object of the survey is to find horizontal position of buried material because this method has the advantage in cost and time of survey. However, the full or partial CMP gather method is recommended in case that the objects of the survey are to get the detailed subsurface information, i.e. the depth to buried material, interval velocity of geological layer, and mapping the groundwater table.

• Journal of the Korean Ceramic Society
• /
• v.41 no.11
• /
• pp.858-863
• /
• 2004

The thermoelectric power, dc conductivity and magnetic properties of the cubic L $a_{2}$ 3/Ti $O_{2.84}$ were investigated. The thermoelectric power was negative below 350 K. The measured thermoelectric power of L $a_{2}$ 3/Ti $O_{2.84}$ increased linearly with temperature, in agreement with model proposed by Emin and Wood, and was represented by A+BT. Temperature dependence indicates that the charge carrier in this material is a small polaron. L $a_{2}$ 3/Ti $O_{2.84}$ exhibited a cross over from variable range hopping to small polaron hopping conduction at a characteristic temperature well below room temperature. The low temperature do conduction mechanism in L $a_{2}$ 3/Ti $O_{2.84}$ was analyzed using Mott's approach. Mott parameter analysis gave values for the density of state at Fermi level [N( $E_{F}$)] = 3.18${\times}$10$^{20}$ c $m^{-3}$ e $V^{-1}$ . The disorder energy ( $W_{d}$) was found to be 0.93 eV, However, it was noted that the value of the disorder energy was much higher than the high temperature activation energy. The exist linear relation between log($\sigma$T)와 1/T in the range of 200 to 300 K, the activation energy for small polaron hopping was 0.15 eV.

• Korean journal of applied entomology
• /
• v.43 no.1
• /
• pp.85-89
• /
• 2004

Numerical measurements were made for fresh weight, body length and width, head width, and color and length of antenna of Japanese pine sawyer, Monochamus alternatus adults, a primary vector of pine wood nematode, Bursaphelenchus xylophilus in Korea. We measured 563 females and 601 males that emerged out of dead pine logs from 2001 to 2002. General linear model analysis showed that measurements of fresh weight, body length, and body width were significantly higher in females than in males. Head width was not significantly different between sexes. Antennal length of males was significantly longer than that of females. For females and males respectively, average fresh weights were 0.305g and 0.277g, body lengths 20.97mm and 19.93mm, body widths 6.52mm and 6.18mm, head widths 3.78mm and 3.70mm, and antennal lengths 31.19mm and 45.49 mm. Antennal length or ratio of antennal length to body length overlapped in some ranges between 2 sexes. Therefore antennal length itself or ratio of antennal length to body length could not be used as a definite criterion to discriminate sexes. However, check on color of the antennae of 4,033 adults revealed without exception that basal part of every segment of flagellum of female antenna was covered with whitish-grey hairs, while whole part of every segment of male flagellum was covered with brownish-black hairs. This characteristics might be a best way to differentiate sex of this species.

• Journal of Adhesion and Interface
• /
• v.2 no.3
• /
• pp.16-24
• /
• 2001

The curing behavior of a phenolic resin (F/p: 1.3, 1.9, 2.5 for resol resin, F/P: 0.5, 0.7, 0.9 for novolac resin) has been studied by FT-IR spectroscopy. In this study is to synthesis of resol and novolac type phenolic resin with different F/P molar ratios and to compare the level of cure at different curing temperature conditions ($130^{\circ}C$, $160^{\circ}C$, $180^{\circ}C$ for resol resin, $160^{\circ}C$, $170^{\circ}C$, $180^{\circ}C$ for novolac resin) for 3, 5, 7, 10, 20, and 60 (min.), respectively. The conversion (${\alpha}$) was determined by the ratio of the peak area with time to the peak area of non-baked phenolic QH ($3300cm^{-1}$) at spectra. It is concluded that the initial curing rate of resol and novolac resin was increased as the molar ratio of formaldehyde/phenol increased and as the curing temperature of resin increased. According to the analysis was by the homogenous first-order model, the initial curing rate of resol and novolac resin was increased as the molar ratio of formaIdehyde/phenol increased at specific curing temperature.