• Journal of the Korean Wood Science and Technology
• /
• v.18 no.2
• /
• pp.79-85
• /
• 1990

Traditional complex joints have used to a wide variety of wooden furniture construction. Dowel joint is the most popular joint s. However design of this joint to meet specified service condition has been hampered by a lack of proven design formulas which can be use to predict their strength. The object of this study is to investigate the withdrawal strength and effect of dowel diameters in wood and wood based materials. The obtained results were as follows; 1. The relationship between withdrawal strength and dowel diameter is found to be linear. 2. Withdrawal strength of medium density fiberboard and Sepetir in end-to-side joints is superior to Antiaris, particleboard and plywood. 3. In end-to-end joints, withdrawal strength of medium density fiberboard is the most superior joint. but Sepetir. Antiaris and plywood have similarly strength and particleboard is inferiority. 4. Withdrawal strength in end-to-end joints of Antiaris and plywood is higher than in end-ta-side joints. But in end-to-end joints of Sepetir. medium density fiberboard and particleboard is similarity in end-to-side joints.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.1
• /
• pp.20-26
• /
• 2014

This paper represented the finite element analysis to estimate structural performance of stress-laminated deck, which is determined by deflection, stress, and aging characteristics of tensioning. After loading, the deflected shape showed plate behavior because pre-stressing make frictional force between each member. Compared between initial post-tension and the results, pre-stressing forces were decreased with deck deflection. This is because deflection occurred in the deck so that pre-stressing decreased due to load reduction. However, material plasticity was not considered so that advanced researches should be performed.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.872-879
• /
• 2016

Demand of natural interior finishing material has been widely sprayed in nowadays because many weak people as children, pregnant women, and elder people are being struggled with sick house syndrome due to volatile organic compounds such as formaldehyde, toluene, benzene, etc. Our research group developed a no-added formaldehyde adhesive for wood-based panels from mainly rice powder and some additives in the previous study for abating sick house syndrome. Since the rice powder adhesive provides a good source of nutrients with microorganisms, it was suspected a susceptibility of the rice powder adhesive to fungal and sapstain attack. We evaluated anti-sapstain activity of the rice powder adhesives modified by adding wood preservatives. We modified the rice powder adhesive by adding three different types of anti-sapstain preservatives at three different concentrations to assess their anti-sapstin activity. The bonding strengths of the modified rice powder adhesives were still outstanding performance on all samples. Moreover, the plywood manufactured with the modified rice powder adhesive satisfied outdoor use requirement for ordinary plywood (KS F3101, Korean Standard). The results obtained showed that at least 3% of preservative should be added to the rice powder adhesive to obtain effective anti-sapstain activity.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.4 s.117
• /
• pp.68-75
• /
• 2006

Electromagnetic shielding sheet using the carbon and wood fiber mixture was manufactured in an effort to develop an electromagnetic shielding packaging material. Carbon fibers were cut into 5, 10, and 15 mm using the automatic cutting device and blown and dispersed using compression air passed through the fine nozzle. Then carbon fibers were slurried with water (0.1% consistency), and softwood kraft pulp along with cone starch were added. The wet mats were manufactured by dewatering in modified hand-sheet machine. The wet mats were pressed upto $4kgf/cm^2$ in the carbon and wood fiber mixture mat press. The wet mats were dried in the automatic controlled plate dryer. Investigation on the formation and surface structure of the newly developed carbon and wood fiber mixture electromagnetic shielding sheet were carried out using the scanning electron microscopy and the image analyzer. Finally electromagnetic shielding characteristics of the newly developed carbon and wood mixture sheet were measured using net-work analyser. The result was promising in the light of the fact that this method could open a new way to substitute the expensive imported electromagnetic shielding sheet.

• Journal of the Korea Furniture Society
• /
• v.26 no.3
• /
• pp.207-221
• /
• 2015

Inlay is a high technique of inlaying patterns on the surface of crafts and widely used transcending time and place at various hand crafting area. Inscribed pattern technique using rare materials in the area have been used by the artisans of artistic flair and functionality and its value is also highly regarded from ancient to modern and inherits and is being developed today. Existing inlay technique, however, has not been spread out because it needs craftsman's skill based on the handcraft and inscribed materials are very rare to use. This paper aims to replace natural wood Sanggam materials for traditional furniture patterns such as Samho Jang, Ohho Jang, Seongtoenoe Moon, Gyeopgwinoe Moon and wood inlay text like Soo (Long life), Bok (Luck), Kang (Peace), Ryoung (Relaxed) and gammadion cross pattern. Gathered black, yellow and white color dyed wood using power tools can replace rare natural inlay materials through reliable and standardized supply. Dyed-gathered inlay materials can easily replace wood inlay materials, therefore, attempt to create an improved direction regarding materials and fabrication techniques in order to make traditional or contemporary artistic furniture to be produced.

• Conservation Science in Museum
• /
• v.17
• /
• pp.43-54
• /
• 2016

This study examines wood materials used in the inscription sword with ring pommel discovered at Geumgwanchong Tomb in Gyeongju: one set inscribed with the name "King Isaji"(K618) and another inscribed with the phrase "the Sword of King Isaji"(M336). The scabbards of both swords are made of Juglandaceae(Juglandaceae Juglans spp). Two separate wood pieces were joined together to create the hilt and the scabbard of the sword engraved with the name "King Isaji." The hilt of the sword with the inscription "the Sword of King Isaji" was also made by joining two wood pieces.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.5
• /
• pp.46-57
• /
• 2007

The leachability of boron in zinc borate (ZB)-modified oriented strandboard (OSB) from southern wood species was investigated in this study. The leaching experiments were conducted by exposing edge-sealed OSB samples under running water at $31^{\circ}C$ for 8, 24, 72, and 216 h. The results from leached samples were compared with those from the unleached controls. Boron leaching of the modified OSB occurred upon the initial water exposure, and the leaching rate decreased as the leaching time increased. Initial boric acid equivalent (BAE) level, wood species, and sample thickness swelling significantly influenced the leachability. There was no consistent effect of polyethylene glycol (PEG) on zinc borate leaching. The glue-line washing within OSB due to thickness swelling of the test samples under water and decomposition of the borate to form water-soluble boric acid were thought to be two possible causes for the observed leaching. The relationship between assayed BAE and leaching time followed a decaying exponential function for zinc borate treated OSB. From the boron/zinc ratio after each leaching period, boron element in ZB was more or less leachable. The material constant of the regression models allowed comparing the leachability of the modified OSB for various wood species. An unified leaching method for treated wood composite materials is needed.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.4
• /
• pp.368-379
• /
• 2018

Objective of this work is to study the effects of a saline solution used to pretreat lignocellulosic material derived from champak timber. The native lignocellulosic solids, in powder form, were mixed with saline water solutions of three different concentrations and maintained for 2 weeks without stirring. The treated solids were washed, recovered, and then dried under sunlight. The substrates were characterized using X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM). The crystallinity (CrI), lateral order index (LOI), total crystallinity index (TCI), and surface morphologies of all the samples were determined. The treated biomass structures were compared with controls. The data show that the structures of all the treated substrates changed, as indicated by CrI. CrI of the treated substrates decreased significantly compared with that of the original wood, as did LOI and TCI quantities, whereas the HBI parameter increased. The results indicate that the saline water pretreatment modified the wood samples.

• Fire Science and Engineering
• /
• v.25 no.3
• /
• pp.119-124
• /
• 2011

In this study, we measured the smoke density characteristics to find the fire risk of Wood-Plastic composites (WPCs) which are one of spotlighting materials for landscape architecture and residential construction material with the cone calorimeter tester (by ISO 5660-2) and the smoke density tester (by ASTM E 662). In addition, the identical test was implemented to compare the smoke density characteristics between the red pine and the antiseptic wood. The result of cone calorimeter test showed that emissions of carbon monoxide, carbon dioxide and total smoke production rate of WPCs were higher than those of red pine and antiseptic wood. And the result of smoke density test showed that maximum specific optical smoke density(Dm) of WPCs was higher than that of red pine and antiseptic wood as well.

• Food Science of Animal Resources
• /
• v.18 no.4
• /
• pp.364-370
• /
• 1998

This study was carried out to establish optimum smoking conditions i.e., smoking temperature, time, and smoking material for meat products. Smoking materials employed for smoking were oak and apple trees. Roast ham and wiener produced by various smoking conditions wree subjected to polycyclic aromatic hydrocarbons (PAHs) analysis. Benzo(a)pyrene was not detected in roast ham and wiener prepared with oak wood smoked and apple wood smoked at 250$^{\circ}C$. The content of benzo(a)pyrene in roast ham and wiener with apple wood smoked at 400$^{\circ}C$ were 0.6 and 0.7 $\mu\textrm{g}$/kg, and those sample smoked at 500$^{\circ}C$ is not suitable for meat products due to the high production rate of benzo(a)pyrene. The higher smoking temperature of the products, the higher the content of PAHs. The similar tendency was observed in smoking time. PAHs contents of the products smoked with oak wood was ranged from non-dection to 0.5 $\mu\textrm{g}$/kg. Meat products smoked for 75 min. were found to be highly valuable from the viewpoints of flavour and color.