• Journal of the Korean Wood Science and Technology
• /
• 제37권4호
• /
• pp.300-309
• /
• 2009

목재를 이용한 구조의 효율적인 사용은 자원의 낭비를 줄이고 세계 환경을 보호할 수 있다. 이 연구는 대단면 목조건축을 위해 강재와 구조용 집성재를 이용한 내화성능을 지닌 복합재료의 개발을 목적으로 한다. 내화 시험에 앞서 구조용 강재와 구조용 집성재를 이용한 복합재료의 휨강도 특성을 확인하고자 한다. 구조용 강재 보(H type)와 구조용 집성재 보, 구조용 강재와 구조용 집성재를 이용한 복합재료 보의 휨시험을 시행하였다. 구조용 집성재간의 접착제로는 레졸시놀계를 사용하였으며 구조용 강재와 구조용 집성재 간의 접착제로는 폴리우레탄 수지를 사용하였다. 휨시험은 KS F 2150에 의거하여 시행하였으며 각각의 평균 최대하중은 복합재료가 137.5 kN, 구조용 집성재가 106.5 kN, 구조용 강재가 48 kN을 나타내었다. 구조용 집성재가 높은 휨탄성력을 지니고 있기 때문에 복합재료를 사용할 경우 구조적 안정성을 부여할 뿐 아니라 친환경적인 재료로 이용될 수 있을 것이다.

• Journal of the Korean Wood Science and Technology
• /
• 제47권5호
• /
• pp.655-662
• /
• 2019

This study evaluated the multi-bonding performances of timbers as well as those of reinforcement and timber to obtain data for preparing guidelines regarding the use of timbers as large structural members. For the multi-bonding performances of timbers, four types of bonding surfaces were prepared according to the pith position. For the bonding performances of FRP (fiber-reinforced plastic)/steel plate and timber, a total of 11 types of specimens were produced for the selection of the appropriate adhesive. The bonding performances of the produced specimens were evaluated through a water soaking delamination test, a water boiling delamination test, and a block shear strength test. The test results showed that the bonding strength of the bonding surface according to the pith position was highest in the specimen for which the two sections with the pith at the center of the cross-section on timber and between the bonding surfaces (the tangential and radial sections were mixed) were bonded. Furthermore, the specimens for which the section (radial section) with the pith on the bonding surface of the timber was bonded showed a high delamination percentage. The results of the block shear strength test showed that the bonding section did not have a significant effect on the shear strength, and that the measured wood failure percentage was higher than the KS standard value. The PVAc adhesive showed the highest bonding strength between larix timber and GFRP (glass FRP). Furthermore, the epoxy and polyurethane adhesives showed good bonding strength for CFRP (carbon FRP) and structure steel, respectively.

• 보존과학회지
• /
• 제28권2호
• /
• pp.165-173
• /
• 2012

본 연구에서는 고대 먹의 과학적이고 체계적인 분석을 통해 선조들의 조묵방법 및 기술을 파악하는 것이 연구의 목적이다. 고목재와 고문서의 묵서부의 먹을 분석한 결과 다음과 같은 결론을 얻었다. 고목재(창덕궁 신선원전 적심)를 연륜연대분석한 결과 1899년에 벌채된 것으로 나타났으며, 따라서 고목재에 씌어진 먹의 연대를 추정할 수가 있었다. 고대 먹 원료인 그을음의 단일입자크기는 고목재의 경우 평균 107nm로 가장 크게 분석되었고, 12개의 고문서의 경우 38~86nm범위를 나타냈다. 응집체입자크기 분석 결과 고목재의 경우 평균 370nm로 단일입자크기와 같이 가장 크게 분석되었으며, 고문서의 경우 평균 206~318nm로 분석되었고, 단일입자크기와 응집체입자크기 간에는 같은 경향의 분포를 나타내었다. 단일입자크기와 응집체입자크기로 그을음의 원료를 분석할 수가 있을 것으로 생각되었다. 고목재와 고문서 묵서부분의 박편상먹의 적외선 및 라만 분광분석에서는 목재나 종이의 간섭으로 먹 입자의 스펙트럼을 얻을 수 없었다. 고목재에서 분리한 분말먹의 라만 분광분석에서는 현대 송연 그을음과 유사한 라만 스펙트럼패턴을 보여, 송연먹으로 추정할 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제25권4호
• /
• pp.29-38
• /
• 1997

The effect and control of wood property of reconstituted composite panels for improved board properties by wood-waste materials and development of combination method for heterogeneous materials have been of interest to the wood science researchers. The purpose of this study is to consider the properties in relation to hot pressing conditions and to develope the optimum hot pressing condition with waste wood and waste tire for the manufacturing of composite boards. The study of composite boards for recycling of wood and waste tire is nothing up to the present. Physical and mechanical properties such as specific gravity, moisture content, swelling coefficient, modulus of rupture and modulus of elasticity in bending test were studied. The condition of 3-stage press time for the lowest moisture content of composite board was $4{\rightarrow}3{\rightarrow}3$ minutes. Specific gravity of composite panels was affected mainly by the amount of rubber chip. Because of the low rigidity and high elasticity in rubber chip, it is considered the composite panel was adequate material in the place of compression load, but not bending load. Therefore, it was concluded that a use of rubber-based wood composite panel is proper to the interior materials such as floor a room than exterior materials. From the test results, the most optimum hot pressing conditions were $4{\rightarrow}3{\rightarrow}3$ minutes for 3-stage press time and $45{\rightarrow}20{\rightarrow}5kg/cm^2$ for 3-stage press pressure. The rubber-based wood composite panel was very excellent in elasticity by combination of rubber chip in comparison with existing other wood-based materials. Therefore, it was considered that rubber-based wood composites can be applicable to every interior materials such as floor a room and will be expected to effective reuse and recycle of waste tires and wood-waste materials, and will be contribute to protection of environment pollution in earth.

• Journal of the Korean Wood Science and Technology
• /
• 제31권4호
• /
• pp.57-62
• /
• 2003

본 연구에서는 산불 피해 소나무재의 이용을 위한 기초자료를 얻고자 역학적 및 건조 특성을 조사하였다. 산불피해재는 종압축 특성, 전단강도, 충격휨흡수에너지 등에서 건전재와 거의 유사한 결과를 보여주었으며, 산불피해재 변재부의 휨특성은 건전재보다 양호하게 나타났다. 건전재와 산불피해재 변재부의 생재함수율은 산불피해재가 다소 낮았으나, 건조속도는 거의 차이가 없었다. 건조시 발생되는 초기할렬은 건전재가 산불피해재보다 발생율이 높았고, 내부할렬은 건전재와 산불피해재에서 발생되지 않았다. 따라서 산불에 의해 피해를 입은 목재의 대부분은 수피부를 제거하여 이용할 경우 건전재와 거의 동일한 용도로서 사용이 가능할 것으로 생각된다.

• KSBB Journal
• /
• 제19권5호
• /
• pp.381-384
• /
• 2004

The antimicrobial and antioxidative activities were investigated to confirm the utility of wood vinegar. Antimicrobial activity was performed by paper disc method and liquid culture. The growth inhibition was observed in all microbial species at a dose of as low as 25 $\mu$m of wood vinegar by paper disc method. Also, in liquid culture, S. cerevisiae and P. aeruginosa were more inhibited the growth than others in the concentration of $2\%$ (v/v). For measuring of antioxidative activity, wood vinegar was fractionated with acidic, phenolic, basic and neutral fraction; and their antioxidant activities were measured by the radical scavenging effect on DPPH radical. In four fractions, phenolic fraction showed high antioxidative activity.

• 한국가구학회지
• /
• 제18권2호
• /
• pp.106-110
• /
• 2007

This study was performed to find potentialities of the leaves of gingko tree (Gingko biloba L.) as a raw material for particleboard (PB) manufacturing. Various amounts of the leaves were mixed with wasted wood particles to manufacture PB. Physical and mechanical properties, such as density, internal bond (IB) strength, and modulus of rupture (MOR) of manufactured PB were not much different from those of the control board. Formaldehyde emission values decreased with increasing the amount of leaves. Especially, the formaldehyde emission of PB made with 5 percent of leaves was decreased to 1.31 mg/l, which is about 36% lower emission than that of the control. From these results, the leaves of gingko tree may be considered as an additive of lowering formaldehyde emission in a functional PB manufacturing process.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.236-237
• /
• 2014

Recently, it changes to the frame construction in the wall type structure for the life span improvement of the apartment house of our country. The execution of the light panel increased while the execution of the frame construction increased. Therefore, the density and absorption ratio of the magnesium oxide matrix according to the wood flour amount of addition ratio property try to be analyze for the lightweight of the surface material of the light panel. The test result, the density has been declined as the addition ratio increase of the wood flour. In the case of the water absorption ratio, water absorption ratio has been increased as addition ratio increase of wood flour. However, wood flour addition ratio 15% determined the most appropriate when considering the density and water absorption ratio.

• 한국가구학회지
• /
• 제20권5호
• /
• pp.431-439
• /
• 2009

When we look at the pattern techniques of wooden furniture in the 19th century Joeson Dynasty, we see that furniture patterns in the main living room were showy and colorful while furniture patterns in the library room, where noble men used to study, were natural and moderate, retaining the actual color of the material without any artificial coloring. Even the serial patterns in the Hwe-Jang technique, Which were used rarely, used moderate techniques. such as weaving in patterns with colorless woods - willow and black persimmon ets. - rather than using excessive techniques. However, considering the marquetry&intarsia technique of ceramic and the silver string intarsia technique of metal then current, wood work must also have been technically advanced. Korean modern wood furniture needs remedies to improve the standard of sound wood work techniques. This study shows that pattern unit production, composition techniques, and color effects etc. Using colored patterns bars, by improving the pattern composition techniques of Marquetry&Intarsia, can be substituted for the production logic of modern manufactured furniture.

• 한국가구학회지
• /
• 제20권4호
• /
• pp.339-357
• /
• 2009

Probability based design(PBD) method is independent of construction materials and uses real material properties unlike allowable stress design(ASD) that depends on small clear specimen property, also give quantitative safety and endurance lifetime of a certain material. Moreover, almost advanced country accepted PBD method instead of ASD method. So it is urgent to convert the current ASD method into the PBD method. However, there are wholly lacking of domestic researches related to current issue, and to solve several points in ASD method and to take advantage of PBD method, the conversion from the ASD method into the PBD method is a worldwide trend. Other domestic construction codes, such as steel or concrete constructions, accept the PBD method as well. Accordingly, to introduce PBD method into wood structural design, general theory, and preliminary data and methods were reviewed. With keeping this in mind, some important contents were reviewed, sorted some points for wood structural design that have distinctions against the other construction materials. Furthermore, the history of PBD method, and statistical data and theories for the PBD method, and preliminary data of resistance and load that are two random variables for the PBD method, and finally the difference between limit state design(LSD) and load and resistance factor design(LRFD) that were two superpowers in the PBD method.