• International Journal of Contents
• /
• 제10권1호
• /
• pp.43-46
• /
• 2014

Subject classification of journals is important because it can be utilized for the improvement of scholarly information services and analysis by research area. The classification by experts in a subject area wastes a lot of time and expense. On the other hand, the simple classification with basic information, such as the journal title has limitations. To solve this problem, this paper suggests the automatic classification of Korean journals using the SCI journals information cited by Korean journals, and an analysis of the classification result. In particular, this study adopted the WoS subject categories for classification to support the base for comparison between the Korean citation database and the global citation database (KSCI vs. SCI).

• 대한화학회지
• /
• 제13권4호
• /
• pp.317-324
• /
• 1969

Isopolytungstic acid and it's salts, which are formed in sodium tungstate solutions, when acidified with perchloric acid, have been investigated by cryoscopic method. The results obtained are summarized as follows; It was not possible to measure the molecular weight of sodium isopolytungstates which are salthydrates, by means of cryoscopic method. Regardless of the concentration of solution, paratungstate and acid hexatungstate are formed at $H^+/WO_4^{2-}$ ratio of 1.15 and 1.50. It has been shown that isopolytungstic acid and it's salts are also formed at $H^+/WO_4^{2-}$ ratio of 1.30 and 1.90 and in highly concentrated solutions at 1.40 and 1.65.

• 센서학회지
• /
• 제6권1호
• /
• pp.24-34
• /
• 1997

본 연구에서는 비정질 $WO_{3}$ 박막을 작용전극으로 $V_{2}O_{5}$ 박막과 NiO 박막을 각각의 대향전극으로 사용한 두 종류의 상보형 일렉트로크로믹 소자를 제작하고 그 특성을 조사 연구하였다. 그 결과 $100{\sim}150nm$ 두께로 진공증착된 $V_{2}O_{5}$ 박막을 대향전극으로 이용하여 제작된 $ITO/WO_{3}/LiClO_{4}-PC/V_{2}O_{5}/ITO$ 구조의 상보형 소자에서는 $1{\sim}2V$ 정도의 낮은 인가전압에서 광변조량이 $50{\sim}60%$를 나타내는 우수한 특성을 나타냈다. 그리고, RF 반응성 스퍼터링 방법으로 제작된 NiO 박막을 대향전극으로 이용한 $ITO/WO_{3}/LiClO_{4}-PC/NiO/ITO$ 구조의 경우 1.5V의 인가전압에 가시광선 영역(${\lambda}=550nm$)에서 약 25% 정도, 근적외선 영역(${\lambda}=850nm$)에서 약 30% 정도의 태양광을 변조할 수 있는 특성을 보였다.

• 한국재료학회지
• /
• 제11권11호
• /
• pp.953-959
• /
• 2001

Homogeneous spherical W-Co salt powders were made by spray drying of aqueous solution of ammonium $metatungstate(NH_4)_6(H_2W_{12}O_{40}){\cdot}4H_2O,\; AMT)$ and cobalt nitrate $hexahydrate(Co(NO_3)_2{\cdot}6H_2O)$. The thermal decomposition process of spray dried W-Co salt powders was studied by TG, XRD, SEM, TEM and FT-IR. Spray dried W-Co salt powders were calcined for 1 hour in the temperature from$ 350^{\circ}C$ to $800^{\circ}C$ in atmosphere of air. At the temperatures over $600^{\circ}C$, spherical $CoWO_4/WO_3$ composite oxide powders were obtained. The primary particle size of W/Co composite oxide powders increased with increasing thermal decomposition temperature due to the particle growth. The observed crystallite size by TEM was in the range of 60nm and that of $CoWO_4$ calculated by Scherrer's formula at $800^{\circ}C$ was smaller than 55nm. The crystallite site was identified by XRD and TEM.

• 한국분말재료학회지
• /
• 제23권5호
• /
• pp.372-378
• /
• 2016

This study focuses on the development of an alkaline leaching hydrometallurgy process for the recovery of tungsten from WC/Co hardmetal sludge, and an examination of the effect of the process parameters on tungsten recovery. The alkaline leaching hydrometallurgy process has four stages, i.e., oxidation of the sludge, leaching of tungsten by NaOH, refinement of the leaching solution, and precipitation of tungsten. The WC/Co hardmetal sludge oxide consists of $WO_3$ and $CoWO_4$. The leaching of tungsten is most affected by the leaching temperature, followed by the NaOH concentration and the leaching time. About 99% of tungsten in the WC/Co hardmetal sludge is leached at temperatures above $90^{\circ}C$ and a NaOH concentration above 15%. For refinement of the leaching solution, pH control of the solution using HCl is more effective than the addition of $Na_2S{\cdot}9H_2O$. The tungsten is precipitated as high-purity $H_2WO_4{\cdot}H_2O$ by pH control using HCl. With decreasing pH of the solution, the tungsten recovery rate increases and then decrease. About 93% of tungsten in the WC/Co hardmetal sludge is recovered by the alkaline leaching hydrometallurgy process.

• 한국수소및신에너지학회논문집
• /
• 제27권4호
• /
• pp.329-334
• /
• 2016

Hydrogen is eco-friendly alternative energy source and the photoelectrochemical water splitting is believed to be one of the promising methods for hydrogen production. Many researchers have studied several potential photocatalysts to increase the photoelectochemical performance efficiency for hydrogen conversion. In this study, the GO (graphene oxide) was prepared by Tour's method and was dispersed in precursor solutions of $WO_3$ and $BiVO_4$. Those precursor solutions were spin-coated on FTO glass and several photocatalyst thin films of $WO_3$, $BiVO_4$ and $WO_3/BiVO_4$ were prepared by calcination. The morphologies of prepared photocatalyst thin films were measured by scanning electron microscope. The photoelectrochemical performances of photocatalyst thin films with rGO (reduced graphene oxide) and without rGO were analyzed systematically.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제4권7호
• /
• pp.227-234
• /
• 2015

기존의 USN 실시간 모니터링 시스템은 데이터를 수신받아 별도의 서버 시스템에 데이터베이스를 구성하여 정보를 처리하였으나, 최근의 IoT 및 WoT 기술의 대두로 인해 기존의 USN 환경에 새로운 Social Web of Things(SWoT) 개념을 도입하면 소셜 네트워크 서비스(SNS) 상에서 비용 효율적이고 통합적인 관리, 공유, 접근을 가능케 할 수 있다. 본 연구에서는 응급상황 전파에 PUSH 메시지 서비스를 접목하여 전달 시간을 단축시키고, 별도의 서버 구축 없이 SNS가 제공하는 부가 기능만으로 동작하는 모니터링 시스템을 구성 및 구현함으로써 기존 SWoT 기반의 실시간 모니터링 시스템의 단점을 극복할 수 있는 개선형 모델을 제안하고 검증한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.471-474
• /
• 2000

A flat type microgas sensor was fabricated on the p-type silicon wafer with low stress S $i_3$ $N_4$, whose thickness is 2${\mu}{\textrm}{m}$ using MEMS technology and its characteristics were investigated. W $O_3$thin film as a sensing material for detection of N $O_2$gas was deposited using a tungsten target by sputtering method, followed by thermal oxidation at several temperatures (40$0^{\circ}C$~$600^{\circ}C$) for one hour. N $O_2$gas sensitivities were investigated for the W $O_3$thin films with different annealing temperatures. The highest sensitivity when operating at 20$0^{\circ}C$ was obtained for the samples annealed at $600^{\circ}C$. As the results of XRD analysis, the annealed samples had polycrystalline phase mixed with triclinic and orthorhombic structures. The sample exhibit higher sensitivity when the system has less triclinic structure. The sensitivities, $R_{gas}$ $R_{air}$ operating at 20$0^{\circ}C$ to 5 ppm N $O_2$of the sample annealed at $600^{\circ}C$ were approximately 90. 90.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 IUMRS-ICEM ABSTRACT BOOK
• /
• pp.117.3-117
• /
• 1998

• 센서학회지
• /
• 제18권4호
• /
• pp.263-268
• /
• 2009

With the increasing number of automobiles, the problem of air pollution from the exhaust gases of automobiles has become a critical issue. The principal gases that cause air pollution are nitrogen oxide or NO$_x$(NO and NO$_2$), and CO. Because NO$_x$ gases cause acid rain and global warming and produce ozone(O$_3$) that leads to serious metropolitan smog from photochemical reaction, they must be detected and reduced. Mixtures of WO$_3$ and $In_2O_3$(WO$_3$:$In_2O_3$=10:0, 7:3, 5:5, 3:7, and 0:10 in wt.%), which are NO$_x$ gas-sensing materials, were prepared, and thick-film gas sensors that included a heater and a temperature sensor were fabricated. Their sensitivity to NO$_x$ was measured at 250$\sim$400$^{\circ}C$ for NO$_x$ concentrations of 1$\sim$5 ppm. The $In_2O_3$ thick-film sensor showed excellent sensitivity($R_{gas}/R_{air}$=10.22) at 300$^{\circ}C$ to 5-ppm NO. The response time for 70 % saturated sensitivity was about 3 seconds, and the sensors exhibited very fast reactivity to NO$_x$.