• 대한방사선치료학회지
• /
• 제30권1_2호
• /
• pp.27-34
• /
• 2018

목 적 : 폐의 우측후사방향 선량전달시, Carbon Side Rail과 환자 고정기구인 Vac-lok이 미치는 영향을 보고자 한다. 대상 및 방법 : Vac-lok의 오른쪽 부분을 10, 20, 30 mm 두께로 제작하였다. 측정은 유리선량계를 이용하여 측정하였고, 측정점은 팬텀 우측 폐의 center Point를 기준으로 좌, 우, 하, 상 방향 각각 A, B, C, D Point로 설정 하였다. 각 point에 유리선량계를 삽입한 후 couch의 Side Rail을 외측(Out)으로 뺀 후 vac-lok을 놓지 않은 no vac-lok, 그리고 10, 20, 30 mm의 vac-lok 위에 팬텀을 세팅하였다. 중심점에 6 MV 광자선을 조사야 $10{\times}10cm^2$, SAD 100 cm, 겐트리 각도 $225^{\circ}$로 하여 300 MU/min 선량률과 100 MU 조사선량을 전달하였다. 측정은 5회씩 실시하였고, 마찬가지로 Side Rail을 내측(In)으로 넣은 후 각 point에 대해서도 같은 조건으로 5 회씩 측정하여 평균값을 산출하였다. 결 과 : side rail에 따라서는 중심점, A, B, C, D Point 각각 -11.8 %, -12.3 %, -4.1 %, -12.3 %, -7.3 %의 선량 감소를 보였다. Side-Rail-Out에서 10 mm vac-lok의 경우 약 -0.9 %가 감소되었고, 20 mm vac-lok 사용 시 약 -2.0 %, 30 mm vac-lock 사용 시 약 -3.0 %가 감소되었다. Side-Rail-In에서 10 mm vac-lok의 경우 약 -1.0 %가 감소되었고, 20 mm vac-lok 사용 시 약 -2.1 %, 30 mm vac-lok 사용 시 약 -3.0 %가 감소되었다. Side-Rail-In 상태의 no vac-lok 선량 값을 기준으로 Side-Rail-Out 상태의 10, 20, 30 mm vac-lok을 사용할 때, side rail에 대한 선량 감소에 더하여 중심점에서는 약 -0.9 %, -1.8 % -2.4 %, A point에서는 -0.5 %, -1.6 %, -2.1 %, B point에서는 약 -0.9 %, -2.0 %, -3.2 %, C Point에서는 -1.0 %, -2.1 %, -3.1 %, D point에서는 약 -1.0 %, -1.6 %, -3.1 %의 추가적인 선량 감소를 나타냈다. 결 론 : 폐를 비롯한 우측후사방향 방사선 치료 시 side rail에 대해 주의를 기울이고, vac-lok 제작 시 vaclok 두께에 대해 관심을 갖는다면 더 나은 치료 효과를 기대해 볼 수 있으리라 사료된다.

• 한국산학기술학회논문지
• /
• 제19권2호
• /
• pp.97-104
• /
• 2018

최근 UAV(unmanned aerial vehicle)는 기존 측량 장비들을 대체/보완할 수 있는 공간정보 제작 도구로 관련 연구들이 활발히 이루어지고 있다. 본 연구에서는 UAV 영상의 활용도에 주안점을 두어, 재난재해와 같이 긴급한 상황이나 지상기준점 확보가 어려운 지역에서의 활용 가능성을 알아보고자 하였다. 이를 위해 UAV 영상으로 3D(dimensional) 형상을 점군(pointcloud)데이터로 제작하였고, 지상기준점을 사용한 모델 데이터와 무기준점 모델 데이터의 절대적/상대적 정확도를 측정하였다. 실험 결과, UAV 영상매칭으로 생성된 3D 형상 점군데이터는 모델 구성을 위한 상대정확도만 확보되어도, 지상기준점 사용 여부에 관계없이 거리측정과 같은 정량적 측정 오차율이 1% 이내인 것으로 검증되었다. 이는 지상기준점 취득이 불가능하거나 작업의 긴급함이 요구될 때, 절대적 위치정보는 부정확하나 신속하게 후처리한 3D 형상 점군데이터만으로도 그 활용이 충분함을 보여준다. 특히 제안된 연구결과는 재난재해 지역과 같이 데이터의 정확도를 확보하기 위한 지상기준점 설계, 측량, 후처리 등의 제반 작업들이 불가능한 상황에서도 길이와 면적과 같은 정량적 측정치와 의미 있는 결과물 취득이 가능하다.

• 대한치과교정학회지
• /
• 제12권2호
• /
• pp.145-154
• /
• 1982

Plaster models were constructed and orthopantomographs were taken for 86 male and 70 female primary school pupils, whose upper and lower permanent 4 incisors and 1st molars were completely erupted without crowding; whose deciduous canines and molars were found almost uniformly even without any visible tooth fractures, dental caries or restorations on proximal surfaces of the teeth. Certain reference points on the orthophantomograph were set up and measured and the values were compared with actual or predicted values from the models. The following results were obtained: 1. In regards to available space, the values from the orthopantomograph were greater than the values from the models by a mean of 3.24% on the upper and 10.06% on the lower for males; 3.05% on the upper and 10.01% on the lower for females. 2. In regards to total mesiodistal widths of permanent canine, 1st and 2nd premolars, the values from the orthopantomograph were greater than the presumed values based on the size of lower permanent 4 incisors from the models by a mean of 18.50% on the upper and 24.09% on the lower for males; 14.54 on the upper and 20.51% on the lower for females. 3. Comparing the magnified values of total mesiodistal widths of permanent canine, 1st and 2nd premolars with those of available space, the regression constants of regression equation (Y = a + bX) between them were a=3.2336, b=0.6533 on the upper and a=5.0138, b=0.3290 on the lower for males; a=2.5994, b=0.6521 on the upper and a=3.0113, b=0.6586 on the lower for females. 4. The correlation coefficients between the magnified values of available space and permanent canine, 1st and 2nd premolars were moderately positive as 0.6474 in the upper and 0.505 on the lower for males; 0.6493 on the upper and 0.6183 on the lower for females. 5. In regards to magnified values of the available space from the orthopantomographs there were no significant difference between sexes, (P>0.05) but of the total mesiodistal widths of permanent canine, 1st and 2nd premolars, a significant difference between sexes was found.(p<0.01).

• 대한족부족관절학회지
• /
• 제20권3호
• /
• pp.112-115
• /
• 2016

Purpose: We aimed to investigate the safety zone for Achilles tendon insertion in the posterior aspect of the calcaneus via the use of magnetic resonance imaging (MRI) when planning for insertional Achilles tendinopathy. Materials and Methods: This study included 95 patients. The MRI of midsagittal plane of the ankle joint was used to measure the proximal and distal insertion point for the Achilles tendon in the posterior aspect of the calcaneus. Patients were divided into three groups according to the proportion of the distal insertion point out of the entire calcaneal length: the proximal, middle, and distal insertion groups. Results: The mean proximal and distal insertion points for the Achilles tendon were measured as 1.05 cm (0~2.11 cm) and 2.36 cm (1.60~2.93 cm), respectively. When the posterior aspect of the calcaneus was used as the reference plane, none of the patients was in the proximal insertion group, while 75 and 20 patients were in the middle and distal insertion groups, respectively. The insertion portion was longer in the distal insertion group ($1.47{\pm}0.25cm$) than in the middle insertion group ($1.27{\pm}0.35cm$). Statistically significant differences with respect to the length of the insertion portion were observed between the two groups (p=0.008). Conclusion: Removal of more than 1 cm below the superior margin of the posterior calcaneus may be dangerous. An MRI study on the Achilles tendon of patients without hindfoot deformity or tendinopathy revealed various insertional characteristics. Preoperative MRI evaluation is safer than relying solely on the simple radiological assessment when planning for insertional Achilles tendinopathy.

• Journal of Radiation Protection and Research
• /
• 제23권4호
• /
• pp.259-266
• /
• 1998

Nucletron사의 microSelectron-High Dose-Rate(HDR) System에서 부인암의 강내 근접치료에 사용되는 Standard shielded applicator set(SSAS)와 Fletcher-Williamson applicator set(FWAS)는 standard applicator set(SAS)와 비교해서 다른 점이 ovoids 위와 아래 부분에 방광과 직장으로 가는 선량을 줄이기 위해 각각 스테인레스 강철(밀도 ${\varrho}=8,000\;kg/m^3$)과 텅스텐 합금(밀도 ${\varrho}=14,000\;kg/m^3$)으로 차폐가 되어 있다. 이에 본 연구에서는 특별히 고안한 지지장치를 사용해서 국제방사선단위위원회(ICRU) 보고서 38에서 권고한 직장과 방광의 위치에 대하여 두 shielded ovoids의 차패효과가 어느 정도인가를 알아보고자 하였다. 지지장치를 PTW사의 전산화된 3차원 물펜톰에 부착하고 SAS의 ovoids를 지지장치에 고정하였다. Ovoids의 끝 부분을 전리함(PTW 0.125cc)의 측정점 높이와 일치시키고 전리함을 좌우로 이동시키면서 선량을 측정하여 두 ovoids의 중간 위치를 확인하였다. 직장에 미치는 선량은 ovoids의 중간에 위치한 선원 M5로부터 posterior방향으로 수직으로 위치한 점들인 20(Rl) 25(R2) 30(R3) 40(R4), 50(R5), 60(R6) mm에서 측정하였다. 방광에 미치는 선량은 M5로부터 anterior방향으로 수직으로 위치한 점들인 20(Bl), 30(B2), 40(B3), 50(B4), 60(B5) mm에서 측정하였다 위와 같은 방법으로 SSAS와 FWAS의 ovoids에서도 각각의 점들에 대한 선량을 측정하였다. SAS와 SSAS의 직장에 미치는 선량차이는 실제 임상에서의 관심 점들과 가장 가까운 25 mm(R2)와 30 mm(R3)거리에서 각각 8.0% 6.0%였고 SAS와 FWAS의 직장에 미치는 선량차이는 25 mm(R2) 와 30 mm(R3)거리에서 각각 25.0% 23.0%로 나타났다. SAS와 SSAS의 방광에 미치는 선량차이는 20 m(Bl)와 30 mm(B2)거리에서 각각 8.0% 3.0%였고 SAS와 FWAS의 방광에 미치는 선량차이는 20 mm(Bl)와 30 mm(B2)거리에서 각각 23.0%, 17.0%로 나타났다. SAS를 SSAS나 FWAS로 대체하였을 때 직장에 미치는 선량은 SSAS는 최대 8.0 %, FWAS는 최대 26.0 %까지 감소되고 방광에 미치는 선량은 SSAS는 최대 8.0 % FWAS는 최대 23.0%까지 감소됨을 알 수 있었고 FWAS가 SSAS 보다 차폐효과가 더 좋은 것으로 나타났으며 이 두 종류의 shielded applicator set는 부인암의 근접치료시 직장과 방광으로 가는 선량을 감소시켜 환자치료의 최적화를 이룰 수 있을 것으로 생각된다.

• 보건교육건강증진학회지
• /
• 제7권2호
• /
• pp.59-70
• /
• 1990

This study was performed during the period between March 22 and July 23, 1989 in other to examine status of aniti - smoking eduation in middle and high school in Seoul. The results were as follows; 1. The respondents of this study were 403 nurse teachers of whom 43.7% had implemented anti - smoking education and 56.3% had not implemented anti - smoking education. Classified by school, those schools implementing anti - smoking education were in order of frequency; boys' high schools (32.4%), coeducational high schools (18.3%) and boys' middle schools (13/6%) and those schools not implementing anti-smoking education were in order of frequency: girls' high schools (23.8%), girls' middle schools (22.5%) and coeducation middle schools(7.6%). 2. The number of times that anti - smoking education was done was once a year (60.8%) or twice a year (38.2%). For teaching materials, 49.4% of the schools reported possessing teaching materials and 50.6% reported not possessing teaching matenials. The content of the anti - smoking education material was classified by grade for 27.8% of the schools and not classified by grade for 72.2%. 3. In schools where anti - smoking education directed at giving up smoking was being used, several problems were presented; lack of reference data and education of data(38.1%) lack of equipment(29.0%), smoking by teachers(13.6%). On the other hand, in schools where anti - smoking education was not being used, the ploblems identified were, in the following order, lack of reference data and education of data(38.1%), lack of equipment(29.0%) lack of time (15.0%) and lack of information (15.4%). There was statistically significant difference the two types of schools. 4. In discussing the proper time for education on giving up smoking, the teachers in school with indicated anti - smoking education the following, in order of frequency, the first year of middle school(30.5%), the second year(27.6%), the last year of middle school (18.4%), primary school (11.9%). For those who did not have anti - smoking education, the result were similar, the first year of middle school (31.9%), the second year (23.5%), primary school (17.6%), and the last year of middle school (15.5%). There results were not statisically significant but they supports the idea of eaely education directed at giving up smoking. 5. The actual frequency of students smoking was as follows. In schools with anti - smoking education 33.5% of the students smoked a lot and seriously 33.0% smoked a little and not seriously. In schools without anti - smoking education, the majority of the teachers (50.4%) indicated that the students were 'few and not serious' followed by 'I don't know well'(19.8%), 'many but not serious'(15.6%), 'many and serious'(15.2%). This implies that the teachers in schools which have anti - smoking education think smoking is more seriously than those who are in schools which do not have anti - smoking education though it is influenced by the members of the school. The opinions on penalities for smoking were as follows; in schools with anti - smoking education, 'punish'(52.8%) and 'give advice'(27.8%). In schools with no anti-smoking education 'punish'(41.9%), 'give advice'(24.5%) and 'I don't know what the rules for punishment should be'(18.5%), and 'do not punish'(16.4). 6. For knowledge about smoking by nurse - teachers, in schools having anti - smoking education the average score was 30.40. There was not statistically significant differences in these scores. But, there is an indication of a need for a deeper and a moer systematic knowledge of smoking as shown by the problem points; lack of reference data and educational data. The reason for this is that education to give up smoking is not considered a part of routine life. But the majority(95.2%) of the respondents indicated that a systematic program in the schools would meet that need.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.422.1-422.1
• /
• 2016

Graphene quantum dots (GQDs), a new kind of carbon-based photo luminescent nanomaterial from chemically modified graphene oxide (CMGO) or chemically modified graphene (CMG), has attracted extensive research attention in the last few years due to its outstanding chemical, optical and electrical properties. To further extended its potential applications as optoelectronic devices, solar cells, bio and bio-sensors and so on, intensive research efforts have been devoted to the CMG. However, the CMG, a suspension of aqueous, have problematic since they are prone to agglomeration after drying a solvent. In this study, we synthesized the GQDs from graphite and deposited on silicon substrate by kinetic spray. The photo luminescent properties of deposited GQD films were analyzed and compared with initial GQDs suspension. In addition, its carbon properties were investigated with GQDs solution properties. The properties of deposited GQD films by kinetic spray were similar to that of the GQDs suspension in water. We could provide a pathway for silicon-based silicon based device applications. Finally, the well-adjusted GQD films with photo luminescence effects will show Energy-Down-Shift layer effects on silicon solar cells. The GQD layers deposited at nozzle scan speeds of 40, 30, 20, and 10 mm/s were evaluated after they were used to fabricate crystalline-silicon solar cells; the results indicate that GQDs play an important role in increasing the optical absorptivity of the cells. The short-circuit current density (Jsc) was enhanced by about 2.94 % (0.9 mA/cm2) at 30 mm/s. Compared to a reference device without a GQD energy-down-shift layer, the PCE of p-type silicon solar cells was improved by 2.7% (0.4 percentage points).

• 정보처리학회논문지D
• /
• 제8D권3호
• /
• pp.285-294
• /
• 2001

집배원이 배달순서로 자동구분하기 위하여 요구되는 요소 기술인 4-state 바코드 시스템 개발이 진행중이며, 우편번호, 배달순서코드, 고객정보 등이 적용될 수 있다. 기존의 고객 바코드 판독 시스템은 우편물상의 바코드 심볼로지가 존재하는 판독대상 영역의 기울기가 $\pm 1.47^{\circ}$이고, 심볼의 훼손과 잡영이 없을 경우에 79∼100msec의 속도로 자동구분 정보가 판독된다. 본 논문에서는 판독범위 및 판독성능의 개선을 위하여 CCD(Charge Coupled Device) 센서로부터 획득된 이미지상에서 존재하는 심볼로지 정보의 고속판독 방법을 제시한 것이다. 이 판독방법은 다진(gray) 이미지 바탕면의 경계값(threshold) 기울기 분포를 기준으로 2개의 경계값을 설정하여 판독대상 정보를 획득하였다. 또한, 바코드 심볼로지의 존재 가능성 영역만을 검사하고, 판독대상 영역에서 트래커(tracker)를 탐색하여 심볼로지에 대한 기울기값, 경계값, 좌표값 등을 생성한 후 심볼값이 판독되도록 한 것이다. 판독시험 결과는 심볼로지가 $\pm 45^{\circ}$ 기울어지고, 잡영이 존재할 경우에도 30∼60msec(58,000∼116,000통/시간) 이내에 판독되었다. 우편물 자동구분용 바코드 판독기로써 적용될 경우에 판독속도가 평균 57.25% 이상 개선되고, 판독범위의 확장으로 0.2%미만의 기계적인 오류(이송과정에서의 Jam 발생비율)를 제외할 경우에 거의 99.8% 우편물을 판독하여 자동구분 처리할 수 있게 될 것으로 기대한다.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3874-3897
• /
• 2023

A high-fidelity computational fluid dynamics (CFD) analysis was performed using the Large Eddy Simulation (LES) model for the lower plenum of the High-Temperature Test Facility (HTTF), a ¼ scale test facility of the modular high temperature gas-cooled reactor (MHTGR) managed by Oregon State University. In most next-generation nuclear reactors, thermal stress due to thermal striping is one of the risks to be curiously considered. This is also true for HTGRs, especially since the exhaust helium gas temperature is high. In order to evaluate these risks and performance, organizations in the United States led by the OECD NEA are conducting a thermal hydraulic code benchmark for HTGR, and the test facility used for this benchmark is HTTF. HTTF can perform experiments in both normal and accident situations and provide high-quality experimental data. However, it is difficult to provide sufficient data for benchmarking through experiments, and there is a problem with the reliability of CFD analysis results based on Reynolds-averaged Navier-Stokes to analyze thermal hydraulic behavior without verification. To solve this problem, high-fidelity 3-D CFD analysis was performed using the LES model for HTTF. It was also verified that the LES model can properly simulate this jet mixing phenomenon via a unit cell test that provides experimental information. As a result of CFD analysis, the lower the dependency of the sub-grid scale model, the closer to the actual analysis result. In the case of unit cell test CFD analysis and HTTF CFD analysis, the volume-averaged sub-grid scale model dependency was calculated to be 13.0% and 9.16%, respectively. As a result of HTTF analysis, quantitative data of the fluid inside the HTTF lower plenum was provided in this paper. As a result of qualitative analysis, the temperature was highest at the center of the lower plenum, while the temperature fluctuation was highest near the edge of the lower plenum wall. The power spectral density of temperature was analyzed via fast Fourier transform (FFT) for specific points on the center and side of the lower plenum. FFT results did not reveal specific frequency-dominant temperature fluctuations in the center part. It was confirmed that the temperature power spectral density (PSD) at the top increased from the center to the wake. The vortex was visualized using the well-known scalar Q-criterion, and as a result, the closer to the outlet duct, the greater the influence of the mainstream, so that the inflow jet vortex was dissipated and mixed at the top of the lower plenum. Additionally, FFT analysis was performed on the support structure near the corner of the lower plenum with large temperature fluctuations, and as a result, it was confirmed that the temperature fluctuation of the flow did not have a significant effect near the corner wall. In addition, the vortices generated from the lower plenum to the outlet duct were identified in this paper. It is considered that the quantitative and qualitative results presented in this paper will serve as reference data for the benchmark.

• 한국측량학회지
• /
• 제38권3호
• /
• pp.175-185
• /
• 2020

3차원 등록은 서로 다른 좌표계를 갖거나 좌표계가 없는 데이터를 기준 좌표계로 일치시키는 과정으로 사진측량의 절대표정, 정밀도로지도 제작을 위한 데이터 결합 등 다양한 분야에서 사용되고 있다. 3차원 등록은 점을 이용하는 방법과 선형을 이용하는 방법으로 구분이 된다. 점을 이용할 경우 서로 다른 공간해상도를 갖는 경우 동일한 공액점을 찾기 어려운 문제가 있다. 이에 반해 선형을 이용할 경우 공간해상도가 다른 경우 뿐만 아니라 점군 형태의 데이터에서 시작점과 끝점이 같지 않은 공액의 선형을 이용하여 3차원 등록이 가능한 장점이 있다. 본 연구에서는 선형을 이용하여 3차원 등록을 수행하기 위해서 쿼터니언을 이용하여 두 데이터 간의 3차원 회전각을 결정한 후 축척과 3차원 이동량을 결정하는 방법을 제안하였다. 제안한 방법의 검증을 위해 실내에서 구축한 선형과 실외 환경의 지상 모바일매핑시스템을 통해 취득한 선형을 이용하여 3차원 등록을 각각 수행하였다. 실험결과, 실내 데이터를 이용한 경우 축척을 고정한 경우와 고정하지 않은 경우 평균제곱근오차는 각각 0.001054m와 0.000936m로 나타났다. 실외 데이터를 이용하여 500m 구간에서 3차원 변환을 수행한 결과 6개의 선형을 이용하였을 경우 평균 제곱근오차는 0.09412m로 나타났으며 정밀도로지도 제작을 위한 정확도를 만족하는 것을 알 수 있었다. 또한, 선형의 개수를 변화시킨 실험에서 9개 이상의 선형을 이용할 경우도 평균제곱근오차의 변화가 크지 않은 것을 통해 높은 정확도의 3차원 변환을 위해 9개의 선형으로도 충분한 것을 알 수 있었다.