• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.5
• /
• pp.713-718
• /
• 2014

DC urban railway power system consists of DC power network and AC power network. The DC power network supplies electric power to railway vehicles and the AC power network supplies electric power to station electric equipment. Recently, because of power consumption reduction and peak load shaving, intelligent measurement of regenerative energy and renewable energy adapted on DC urban railway is required. For this reason, DC smart metering system for DC power network shall be developed. Therefore, in this paper, DC voltage sensor, current sensor, and DC smart meter were developed and evaluated by performance test. DC voltage sensor was developed for measuring standard voltage range of DC urban railway, and DC current sensor was developed as hall effect split core type in order to install in existing system. DC smart meter possesses function of general intelligent electric power meter, such as measuring electricity and wireless communication etc. And, DC voltage sensor showed average 0.17% of measuring error for 2,000V/50mA, and current sensor showed average 0.21% of measuring error for ${\pm}2,000V/{\pm}4V$ in performance test. Also DC smart meter showed maximum 0.92% of measuring error for output of voltage sensor and current sensor. In similar environment for real DC power network, measuring error rate was under 0.5%. In conclusion, accuracy of DC smart metering system was confirmed by performance test, and more detailed performance will be verified by further real operation DC urban railway line test.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.501-512
• /
• 2018

Radio frequency identification (RFID) sensor tag provides several advantages including battery-less operation and low cost, which are suitable for long-term monitoring. This paper presents a self-powered RFID temperature sensor tag for online temperature monitoring in substation. The proposed sensor tag is used to measure and process the temperature of high voltage equipments in substation, and then wireless deliver the data. The proposed temperature sensor employs a novel phased-locked loop (PLL)-based architecture and can convert the temperature sensor in frequency domain without a reference clock, which can significantly improve the temperature accuracy. A two-stage rectifier adopts a series of auxiliary floating rectifier to boost its gate voltage for higher power conversion efficiency. The sensor tag chip was fabricated in TSMC $0.18{\mu}m$ 1P6M CMOS process. The measurement results show that the proposed temperature sensor tag achieve a resolution of $0.15^{\circ}C$/LSB and a temperature error of $-0.6/0.7^{\circ}C$ within the range from $-30^{\circ}C$ to $70^{\circ}C$. The proposed sensor tag achieves maximum communication distance of 11.8 m.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1741-1748
• /
• 2005

In this paper, we describe VLSI design and performance evaluation of OCB-AES crytographic algorithm that simulataneously provides privacy and authenticity. The OCB-AES crytographic algorithm sovles the problems such as long operation time and large hardware of conventional crytographic system, because the conventional system must implement the privancy and authenticity sequentially with seqarated algorithms and hardware. The OCB-AES processor with area-efficient modular offset generator and tag generator is designed using IDEC Samsung 0.35um standard cell library and consists of about 55,700 gates. Its cipher rate is about 930Mbps and the number of clock cycles needed to generate the 128-bit tags for authenticity and integrity is (m+2)${\times}$(Nr+1), where m and Nr represent the number of block for message and number of rounds for AES encryption, respectively. The OCB-AES processor can be applicable to soft cryptographic IP of IEEE 802.11i wireless LAN and Mobile SoC.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.6
• /
• pp.600-607
• /
• 2008

Reliable wireless transmission of data generated by the flight critical subsystems or mission equipments of the unmanned aerial system is critical for mission success. As the UAS system becomes more sophisticated, its dependency on a reliable high rate radio communication system also increases. This requirement is applied not only during the operation phase but also in the early development test phase. This paper introduces a practical cost-effective communication system for a UAS. The downlink module combines analog NTSC video signal with onboard data, and send them using 2.4 GHz carrier wave. The uplink system has less a severe requirement on the bandwidth, and thus uses 430 MHz signal. This paper also presents a sample packet structure which can be adopted for many UAS of similar class.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.268-275
• /
• 2014

In this paper, a dual-band circular ring monopole antenna with stub and ground slot for WLAN(Wireless Local Area Networks)/WiMAX(World interoperability for Microwave Access) applications. The proposed antenna is based on a planar monopole design, and composed of one circular ring of radiating patch, cross strip in circular ring, modified feed line, and two rectangular slot in the ground plane for triple-band operation. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and found the parameters that greatly effect antenna characteristics. Using the obtained parameters, the antenna is fabricated. The numerical and experiment results demonstrated that the proposed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. And characteristics of gain and radiation patterns are determined for WLAN/WiMAX application.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2526-2533
• /
• 2015

In this paper, a design method for a compact dual-band coplanar waveguide-fed slot antenna using SRR(split-ring resonator) conductor is studied. The SRR conductor is loaded inside a rectangular slot of the proposed antenna for dual-band operation. When the SRR conductor is inserted into the slot, the original rectangular slot is divided into a rectangular loop region and a rectangular slot region, and frequency bands are created by the loop and slot, separately. A prototype of the proposed dual-band slot antenna operating at 2.45 GHz WLAN band and 3.40-5.35 GHz band is fabricated on an FR4 substrate with a dimension of 30 mm by 30 mm. Experiment results show that the antenna has a desired impedance characteristic with a frequency band of 2.38-2.51 GHz and 3.32-5.38 GHz for a voltage standing wave < 2, and measured gain is 1.7 dBi at 2.45 GHz, and it ranges 2.4-3.2 dBi in the second band.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1836-1842
• /
• 2010

Sensor network, which is technology to realize the ubiquitous environment, recently, could apply to the field of Mechanic & electronic Security System, Energy management system, Environment monitoring system, Home automation and health care application. However, feature of wireless networking of sensor network is vulnerable to eavesdropping and falsification about message. Presently, PKC(public key cryptography) technique using ECC(elliptic curve cryptography) is used to build up the secure networking over sensor network. ECC is more suitable to sensor having restricted performance than RSA, because it offers equal strength using small size of key. But, for high computation cost, ECC needs to enhance the performance to implement over sensor. In this paper, we propose the optimizing technique for multiplication, core operation in ECC, to accelerate the speed of ECC.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1000-1006
• /
• 2007

This paper presents a power detector circuit which monitors the transmitting power for the application in CDMA cell phones. The proposed power detector are composed of coupler for coupling output power and detector fur monitoring output power. The designed coupler has low loss characteristic because it adopts the stripline structure which consists of two ground planes at both sides of signal plane. The design frequency is 824-849MHz which is the Tx band fur CDMA mobile terminal, and the coupling factor of the stripline coupler is -20dB. A schottky barrier diode is adopted for detector design because of its high speed operation with minimized loss. The required impedance matching is performed to improve the linearity and sensitivity of output voltage at relatively low detector input level where the nonlinear characteristic of diode exists. The package parasitics as well as intrinsic diode model are considered for simulation of the detector. The predicted performances agree well with the measured results.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.10
• /
• pp.1206-1216
• /
• 1999

이동 호스트란 시간과 공간의 제약 없이 필요한 기능을 수행하고, 또한 원하는 정보에 접근할 수 있는 휴대용 컴퓨터를 일컫는다. 이동 컴퓨팅 환경이란 이러한 이동 호스트들을 지원할 수 있도록 구성된 분산 환경이다. 따라서 이동 컴퓨팅 환경에서의 분산 알고리즘은 정적 호스트만을 고려한 기존의 분산 환경에서와는 다르게 이동 호스트의 여러 가지 특성들을 고려하여 제안되어야 한다. 즉, 이동 컴퓨팅 환경의 도래로 인하여 이동성과 휴대성, 그리고 무선 통신과 같은 특성들을 고려한 새로운 분산 상호 배제 알고리즘이 필요하다. 이제까지 이동 컴퓨팅 환경에서의 상호 배제 알고리즘은 토큰 링 구조에 기반을 두고 설계되었다. 토큰 링 구조는 이동 호스트들의 위치를 유지하기 위하여 높은 비용을 필요로 하는 단점을 가지고 있다. 본 논문에서는 균형 높이 트리(height-balanced tree)라는 새로운 모형을 제안함으로써 정적 분산 환경과 이동 분산 환경이 혼합된 환경에서 상호 배제 비용을 감소시킬 수 있는 새로운 알고리즘을 제안하며, 각 경우에 있어서의 비용을 산출하고 평가한다.Abstract The mobile host is a potable computer that carries out necessary functions and has the ability to access desirable informations without any constraints in time and space. Mobile computing environment is a distributed environment that is organized to support such mobile hosts. In that environment, distributed algorithms of which environment not only with static hosts but with mobile host's several properties should be proposed. With the emergence of mobile computing environments, a new distributed mutual exclusion method should be required to consider properties mobile computing system such as mobility, portability, and wireless communication. Until now, distributed mutual exclusion methods for mobile computing environments are designed based on a token ring structure, which have the drawbacks of requiring high costs in order to locate mobile hosts. In this paper, we propose a distributed mutual exclusion method that can reduce such costs by structuring the entire system as a height-balanced tree for static distributed networks and for networks with mobile hosts. We evaluated the operation costs in each case.

• Journal of the Korean Institute of Gas
• /
• v.11 no.2 s.35
• /
• pp.71-77
• /
• 2007

This research proposes the U-drawing information system (U-DIS) based on risk assessment. One of the most outstanding features of U-DIS is to perform the Quantitative Risk Assessment directly on the screen utilizing the Process Information. U-DIS revolutionizes the existing way to do a risk assessment and helps finding information more efficiently and simply. It is designed to open all CAD drawing files on the web-based environment without having the CAD S/W installed on the PC. The U terminal platform in U-DIS supports IPv6 and wireless broadband network and U-DIS can be accessible through a sensor or personal authorization. This results in providing a systematic safety enhancement tool considering not only the operation of the process but also its risk level in the equipment industry. Additionally to aid the decision making process it offers comprehensive and thorough information based on engineering technical theory.