• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.353-362
• /
• 2008

Operation data and fault data are recorded at the TCMS(Train Control and Monitoring System) of train are very important record for repairs and inspection of train. there are two ways to transfer the data today. one is using memory card and the other is using wireless communications. This paper is proposed about TCMS wireless depot analytical equipment that transfers data recorded in train to depot equipment via wireless method. The TCMS wireless depot equipment configuration is an AP(Access Point) and a central server PC at depot equipment. This method has the advantage of decrease of personnel expenses, collection time and convenience of staffs. This paper is verified about the utility of use, efficient establishment position of an AP at depot, the safety of data receiving, the exactitude of data and the shortening of transmission time. and this equipment is now operating at shin-jeong depot of SeoulMetro.

• Journal of Information Processing Systems
• /
• 제15권1호
• /
• pp.203-216
• /
• 2019

The nature of wireless transmission has made wireless sensor networks defenseless against various attacks. This paper presents warning message counter method (WMC) to detect blackhole attack, grayhole attack and sinkhole attack in wireless sensor networks. The objective of these attackers are, to draw the nearby network traffic by false routing information and disrupt the network operation through dropping all the received packets (blackhole attack), selectively dropping the received packets (grayhole and sinkhole attack) and modifying the content of the packet (sinkhole attack). We have also attempted light weighted symmetric key cryptography to find data modification by the sinkhole node. Simulation results shows that, WMC detects sinkhole attack, blackhole attack and grayhole attack with less false positive 8% and less false negative 6%.

• International journal of advanced smart convergence
• /
• 제12권2호
• /
• pp.173-181
• /
• 2023

Data collection is an essential element in the construction and operation of a smart factory. The quality of data collection is greatly influenced by network conditions, and existing wireless network systems for IoT inevitably lose data due to wireless signal strength. This data loss has contributed to increased system instability due to misinformation based on incorrect data. In this study, I designed a distributed MQTT IoT smart sensor and gateway structure that supports wireless multicasting for smooth sensor data collection. Through this, it was possible to derive significant results in the service latency and data loss rate of packets even in a wireless environment, unlike the MQTT QoS-based system. Therefore, through this study, it will be possible to implement a data collection management system optimized for the domestic smart factory manufacturing environment that can prevent data loss and delay due to abnormal data generation and minimize the input of management personnel.

• 한국항행학회논문지
• /
• 제14권2호
• /
• pp.253-259
• /
• 2010

무선 메쉬 네트워크는 Base Station 기반과 더불어 애드혹 네트워크나 블루투스와 같이 유연성을 가진 네트워크이다. 하지만 무선 메쉬 네트워크는 높은 패킷 손실률을 보이고 TCP(Transport Control Protocol) 알고리즘은 무선 메쉬 네트워크의 패킷손실 원인을 네트워크 내의 혼잡으로 인식하기 때문에 TCP 혼잡제어 알고리즘(Congestion Control Algorithm)을 실행하게 된다. 이러한 TCP 동작은 혼잡 손실이 아닌 패킷 손실로 발생 할 경우, 상당한 성능 저하를 초래하게 된다. 본 논문에서는 무선 메쉬 네트워크에서 TCP 혼잡제어 알고리즘의 성능을 개선시키기 위해 혼잡 윈도우를 무선망에서도 적응력 있게 조절하는 연구를 제안하였다.

• 한국통신학회논문지
• /
• 제32권10A호
• /
• pp.941-949
• /
• 2007

신규 무선 네트워크 기술의 발전은 현재의 단일 네트워크 위주의 구성을 가진 무선 서비스 사업자에 새로운 다중 네트워크 (Heterogeneous Network) 환경을 맞이하게 하였다. 또한 무선 통신 사용자 수는 계속적인 증가추세에 있고 사용자들이 원하는 서비스의 종류 또한 계속적으로 다양해지고 있으며 사용자가 기대하는 서비스의 질과 수준 역시 높아지고 있다. 이에 무선 서비스 사업자들은 사용자들의 높아진 서비스 품질을 만족시키고 새로운 형태의 서비스를 안정적으로 공급하며, 현재의 네트워크와 신규 네트워크의 조화로운 운용을 위해 새로운 형태의 운용 구조 (Operation Framework)를 필요로 한다. 본 논문에서는 네트워크간의 비용/효용에 대한 한계 비용 (Marginal Cost) 산정 기법을 도입하여 서비스에 따른 최적 네트워크 운용 기법에 대해 논술한다.

• 한국정보통신학회논문지
• /
• 제18권8호
• /
• pp.1877-1884
• /
• 2014

원격 무선 네트워크 환경에서의 무인 센서 신호처리기의 임무 수행을 위해서는 한정된 전력 자원으로 인해 무인 원격 센서 무선운용 상황에 적합한 신뢰성 있는 저전력 매체 접속 제어 기법이 요구된다. 저전력 무선 네트워크에서 효과적인 신호 전송을 위해서는 CSMA/CA, X-MAC을 일반적으로 고려한다. 본 논문에서는 고정 노드로 구성되는 무선 네트워크에서 노드 제어를 위한 이동 노드의 망 참여/탈퇴가 유동적인 망 형태에서의 신속한 데이터 전달 및 소모 전력 최소화 달성이 가능한 저전력 성능이 향상된 LP-MAC 동작 기법을 제안한다. 고정노드는 망 자율구성을 수행하여 망에 수시로 참여/탈퇴하는 이동 노드로의 빠른 정보 전달을 위해 비동기 방식으로 동작한다. 이동 노드가 망에서 탈퇴할 경우, 망 전체 운용모드가 소모 전력의 최소화를 위한 동기모드로 천이됨으로써 최소 전력 운용이 가능한 매체접속 제어 기법이다.

• 전력전자학회논문지
• /
• 제26권6호
• /
• pp.437-445
• /
• 2021

This paper proposes an operating frequency design method that limits the voltage applied to aload-side converter during the initial operation of a loosely coupled resonant dual-active bridge (LCR-DAB) converter and an initial operating strategy that applies it. The LCR-DAB converter uses two wireless power transfer coils instead of the high-frequency transformer of the general DAB converter. The wireless power coil has a physical distance of several tens of millimeter or more between the two coils; thus, the LCR-DAB converter is a bidirectional isolated power conversion system that can easily achieve high insulation performance. However, for the initial operation of the LCR-DAB, if the power-side converter is operated at the resonance frequency while the load-side converter is not operating, then a very high voltage due to resonance is applied to the load-side converter, thereby causing damage to the converter. Therefore, a method that can stably charge the DC link voltage of the secondary-side converter during the initial operation is needed. This paper proposes a method to initially charge the secondary-side DC link by operating the primary-side converter at a frequency with limited voltage gain rather than at a steady-state operating frequency. The validity of the proposed frequency design method and initial operating sequence is verified through simulation and experimentation of the 1 KW LCR-DAB converter.

• 한국통신학회논문지
• /
• 제32권2A호
• /
• pp.152-161
• /
• 2007

IEEE 802.11 Wireless Local Area Networks (WLANs)는 광대역 무선 인터넷 접속기술로 널리 이용되고 있으며 WLAN을 기반으로 하는 음성 서비스(VoWLAN)와 같은 새로운 응용들이 등장하고 있다. VoWLAN서비스들은 휴대형 장치를 통해 서비스가 되며 베터리 전력을 이용해서 동작하는 휴대형 장치들을 위해 사용 전력을 최소화하여 대기시간을 최대화하는 기술이 필수적이다. 그러나 IEEE 802.11 WLAN 규격은 VoWLAN 서비스와 관련하여 사용 전력을 최적으로 이용하는 동작을 지원하지 않는다. 본 논문에서 페이징, idle 핸드오프 및 지연 핸드오프로 구성되는 새로운 Idle Mode operation을 제안한다. Idle mode operation를 기반으로 동작하는 모바일 호스트는 미리 정의되어 있는 페이징 영역내에서는 핸드오프를 하지 않는다. 모바일 호스트가 새로운 페이징 영역으로 진입할 때에만 최소한의 호처리 신호를 발생시키는 idle 핸드오프를 수행한다. 기존의 IEEE 802.11 WLAN은 idle mode를 지원하지 않기 때문에 Power Saving Mode (PSM)과 IP paging 기법을 동시에 이용해 왔으나 전력소비 효율이 좋지 못하였다. 본 논문은 구현을 통하여 새롭게 제안한 방식인 idle mode operation이 실현가능 함을 증명하고 기존의 방식과 비교하여 전력소비 효율이 더 뛰어남을 보인다.

• Smart Structures and Systems
• /
• 제6권5_6호
• /
• pp.689-709
• /
• 2010

In this paper, a low cost, low power but multifunctional wireless sensor node is presented for the impedance-based SHM using piezoelectric sensors. Firstly, a miniaturized impedance measuring chip device is utilized for low cost and low power structural excitation/sensing. Then, structural damage detection/sensor self-diagnosis algorithms are embedded on the on-board microcontroller. This sensor node uses the power harvested from the solar energy to measure and analyze the impedance data. Simultaneously it monitors temperature on the structure near the piezoelectric sensor and battery power consumption. The wireless sensor node is based on the TinyOS platform for operation, and users can take MATLAB$^{(R)}$ interface for the control of the sensor node through serial communication. In order to validate the performance of this multifunctional wireless impedance sensor node, a series of experimental studies have been carried out for detecting loose bolts and crack damages on lab-scale steel structural members as well as on real steel bridge and building structures. It has been found that the proposed sensor nodes can be effectively used for local wireless health monitoring of structural components and for constructing a low-cost and multifunctional SHM system as "place and forget" wireless sensors.

• Nuclear Engineering and Technology
• /
• 제47권6호
• /
• pp.729-737
• /
• 2015

Wireless communication technologies, especially smartphones, have become increasingly common. Wireless technology is widely used in general industry and this trend is also expected to grow with the development of wireless technology. However, wireless technology is not currently applied in any domestic operating nuclear power plants (NPPs) because of the highest priority of the safety policy. Wireless technology is required in operating NPPs, however, in order to improve the emergency responses and work efficiency of the operators and maintenance personnel during its operation. The wired telephone network in domestic NPPs can be simply connected to a wireless local area network to use wireless devices. This design change can improve the ability of the operators and personnel to respond to an emergency situation by using important equipment for a safe shutdown. IEEE 802.11 smartphones (Wi-Fi standard), Internet Protocol (IP) phones, personal digital assistant (PDA) for field work, notebooks used with web cameras, and remote site monitoring tablet PCs for on-site testing may be considered as wireless devices that can be used in domestic operating NPPs. Despite its advantages, wireless technology has only been used during the overhaul period in Korean NPPs due to the electromagnetic influence of sensitive equipment and cyber security problems. This paper presents the electromagnetic verification results from major sensitive equipment after using wireless devices in domestic operating NPPs. It also provides a solution for electromagnetic interference/radio frequency interference (EMI/RFI) from portable and fixed wireless devices with a Wi-Fi communication environment within domestic NPPs.